Sound & Vibration Settings - Docomo Arrows NX F-06E Instruction Manual

❖
Easy registration of Wi-Fi device
Register Wi-Fi device supporting AOSS or WPS.
Set Wi-Fi tethering to ON in advance.
1
From the Home screen,
WIRELESS & NETWORKS, [More...]
[Tethering] [Easy Wi-Fi registration]
2
Select a registration method
AOSSsystem : [AOSS system] Perform necessary
operations on the Wi-Fi device On the registration
screen, [OK]
WPS system : [WPS system] [Push button system]/[PIN
entry system] Set required items On the
registration screen, [OK]
In case of push button method, press a dedicated button
on the Wi-Fi devices. In case of PIN entry method, enter
PIN code displayed on the Wi-Fi device and tap [OK].
✔INFORMATION
When number of AOSS registration devices exceeds 24, a
confirmation screen for deleting old registration appears. To
use AOSS connection with new device, tap [Yes].
To cancel AOSS setting, on the [Configure Wi-Fi hotspot]
screen, tap [AOSS OFF].
For some Wi-Fi devices, AOSS connection may not be
established. If connection is failed, use WPS connection or
connect manually.
Only 2.4 GHz is supported for AOSS system.
Some applications automatically perform packet
communications. Packet communication is kept active unless
you cut off the connection or the time-out occurs. Activate or
[Settings] In
deactivate packet communication as required.
1
2
You can adjust volume of media playing sound, ringtone &
notification sound, alarm sound.
1
2
122
Stopping packet connection
From the Home screen,
WIRELESS & NETWORKS, [More...] [Mobile
networks]
Unmark [Data enabled]
Sound & Vibration settings
Volumes
You cannot set while Manner mode is enabled.
From the Home screen,
[Sound & Vibration settings] [Volumes]
Slide the slider to adjust sound volume [OK]
[Settings] In
[Settings]
Settings