Data Usage; Airplane Mode - Docomo Arrows NX F-06E Instruction Manual

FM transmitter
You can transmit music saved in the terminal via FM radio
waves to listen from an FM radio or car stereo system.
When using FM transmitter, fully extend the FM transmitter
antenna.
1
From the Home screen,
2
Set [FM transmitter] to [ON]
3
[FM transmitter] [Radio frequency] Select a
radio frequency
4
Tune to the frequency on the receiver
✔INFORMATION
FM transmitter is unavailable while the terminal is in the
following status. If the terminal is in the following status
when FM transmitter is ON, FM transmitter turns off
automatically. It does not turn off during a voice call or while
receiving a call, but the voice call cannot be output.
- During a voice call, while receiving a call, in Airplane mode,
when Bluetooth is ON, when earphones are connected,
while outputting in MHL/Miracast, during International
roaming
- When you have never entered the service area since the
terminal was ON
You can enable Internet access via mobile network, set limit of
mobile data communications on graph or set alert when usage
exceeds the limit.
1
[Settings]
2
When Airplane mode is set, wireless functions of the terminal
(phone, packet communication, Wi-Fi, Miracast, tethering,
Bluetooth function, FM transmitter) are disabled. Wi-Fi and
Bluetooth function can be manually turned on in Airplane
mode.
1
2
✔INFORMATION
119

Data usage

From the Home screen,
WIRELESS & NETWORKS, [More...] [Data
usage]
Set [Mobile data] to [ON]
Data usage managing screen appears and mobile data
communication volume (estimate) per period or per
application is displayed.
To restrict volume of data usage, mark [Set mobile data
limit].
Mark [Restrict background data] to restrict data
communication in background.

Airplane mode

From the Home screen,
In WIRELESS & NETWORKS, [More...]
[Airplane mode] to [ON]
You can also enable/disable Airplane mode from the phone
options menu displayed by pressing and holding P.
[Settings] In
[Settings]
Settings