Qr Code Reader - Docomo Arrows NX F-06E Instruction Manual

Automatic video recording
The terminal automatically adjusts settings and records video
in the following functions.
Image stabilizer and recording voice are always turned on.
Auto focus
Start recording when the center of the screen is clearly focused
on.
Touch focus
Touch an object displayed before/while recording to
automatically focus on.
White balance
Automatically adjust for recording pure white under various
sources of light (sunlight, cloudy sky, artificial source of light
such as incandescent or fluorescent).
Shooting settings for video
Tap [MENU] displayed on the video shooting screen to change
the following shooting settings.
Some items cannot be selected depending on the
combinations.
Some items cannot be set for the in-camera.
Camera Mode
Tap Still/RapidPic/Video/Panorama/QR code to select a camera
mode.
Switch camera
Switch to in-camera/out-camera.
Movie Size
Select shooting size.
Light
Set whether to automatically turn on the flash when recording
in a dark place.
WDR mode
Set to adjust contrasting of screen for video with crushed
blacks reduced even in backlight.
Save
Select data saving location (Terminal/SD card).
If the selected saving destination is low on memory, a
message appears and switch saving destination
temporarily.

QR code reader

Scan QR code data and use it.
QR code cannot be scanned for some versions (type and
size).
Scratches, dirt, damages, low print quality and the strong
reflection of light may disable code reading.
❖
Reading with QR code reader
If the code is not scanned well, try to change the distance
between the code and camera, the angle or direction of
camera.
1
From the Home screen,
2
[MENU] [QR code]
98
[Camera]
Applications