Docomo Arrows NX F-06E Instruction Manual page 119

❖
Adding Wi-Fi network
Enter network SSID or security information to add Wi-Fi
network manually.
Set Wi-Fi to ON in advance.
1
From the Home screen,
Fi]
2
[ ]
3
Enter a network SSID of Wi-Fi network to add
Select security
Security can be set to [None], [WEP], [WPA/WPA2 PSK]
or [802.1x EAP].
4
Enter additional security information as
required [Save]
❖
Disconnecting Wi-Fi network
1
From the Home screen,
Fi]
2
Select the connected Wi-Fi network [Forget]
❖
Connect between Wi-Fi Direct devices without routing an
access point etc.
[Settings] [Wi-
1
2
3
[Settings] [Wi-
When an invitation screen for connecting appears, tap
[Accept].
117
Connecting other devices with Wi-Fi
Direct
Set Wi-Fi to ON in advance.
To transfer data such as videos or still images using Wi-Fi
Direct, obtain an application compatible with data transfer
via Wi-Fi Direct from Play Store and install it.
From the Home screen,
Fi]
[Wi-Fi Direct]
When a Wi-Fi Direct device does not appear, tap
[SEARCH FOR DEVICES].
Tap a detected Wi-Fi Direct device
Disconnecting Wi-Fi Direct device :
Direct device [OK]
When other Wi-Fi Direct device requests connecting
to the terminal
[Settings] [Wi-
Tap a connected Wi-Fi
Settings