Apps; Nx! Eco - Docomo Arrows NX F-06E Instruction Manual

NX! eco

Enabling/Disabling eco-mode
Enable/disable eco-mode.
When eco-mode is enabled, the notification icon appears on
the status bar.
1
From the Home screen,
eco]
2
[ON]/[OFF]
When eco-mode stops, a confirmation screen for
stopping eco-mode.
❖
Advanced settings for eco-mode
1
From the Home screen,
eco]
2
[Advanced settings] Set each item
Eco level : Set type of eco level.
If you select [Light]/[Moderate], tap [Confirm] to see
setting values. If you select [Original], tap [Edit] to
change to original setting values.
Battery : Activate eco-mode when the remaining battery
power becomes less than set level.
Timer : Activate eco-mode at the set time.
✔INFORMATION
[Settings] [NX!
1
2
[Settings] [NX!
1
2
130
When [Do not execute when plugged in] is marked, eco-mode
is canceled while the battery is charging.
When the terminal is in default status, charge the battery fully
and then use this function. If charging is not enough, "Battery
care eco-mode" may not activate.

Apps

Viewing permitted operation of the
applications in the terminal
From the Home screen,
[Apps]
Select an application
Deleting application data or cache
From the Home screen,
[Apps]
Select an application [Clear data]/[Clear
cache]
When [Clear data] is selected, tap [OK].
[Settings]
[Settings]
Settings