Indicator Led - Docomo Arrows NX F-06E Instruction Manual

❖
Easy data transfer support
Move mobile phone data saved on a microSD card to the
terminal.
Move data of phonebook, redialing/incoming history,
schedule, bookmark, alarm, received/sent/unsent mails.
1
From the Home screen,
[Initial settings] [Easy data transfer support]
Check guidance for each data moving location and tap
[OK]. Then follow the onscreen instructions.
If you do not want to display a guidance for moving
location next time, mark [Don't display this screen
again.] before tapping [OK].
✔INFORMATION
Call history is overwritten to redial/received call history in the
original location. Call history saved to the terminal before
data transfer is deleted.
To view moved received/sent/unsent mails, from the Home
screen, [sp-mode mail]
location.
To display the moved schedule, synchronize with the account
on the moved location. The last registered Google account is
set as an account to move to.
On some mobile phones which do not support Easy data
transfer support, part of data cannot be moved.
[Settings]
[Import] to select the
40
❖
About other initial settings
Set the following items as required in addition to the initial
setting items.
Google account setup etc. P147
Email account settings P65
Wi-Fi functions settings P116
Access point (APN) settings P114
Switching to English display P146

Indicator LED

Indicator LED notifies the terminal states such as charging
and missed call by lighting or flashing.
Main notification type, lighting/flashing
Turning power ON : Light once in green
Charging error : Flash in red
New SMS : Flash in a color specified in [Messaging] P64
Missed call, phone memo : Flash in a color specified in [Missed
call LED] P124
Charging : Light in red
✔INFORMATION
Setting and action of indicator LED may vary by application.
For functions that can be set in both indicator LED and
Illumination, Illumination setting comes first. Some
applications may work according to the settings of
application. This function comes first when turning the power
ON.
Before using the terminal