Resetting The Terminal - Docomo Arrows NX F-06E Instruction Manual

Resetting the terminal

Reset the terminal to the default state. All installed
applications and saved data to the terminal, for the most part,
however, are deleted.
To erase SD card data, see "Erasing data in microSD card
(Format)". P129
1
From the Home screen,
PERSONAL, [More...] [Backup & reset]
2
[Factory data reset] [Reset phone]
When Security unlock preference is set, authentication
is required.
3
[Erase everything]
A short while after the reset is completed, the terminal will
be restarted.
Do not turn off the terminal while resetting phone.
✔INFORMATION
If the terminal is reset while Privacy mode is set, data saved
in the microSD card to which Privacy mode is set cannot be
accessed. Make sure to disable Privacy mode with the
microSD card attached before resetting. P141
When the touch panel is not working properly, etc. after
resetting, turn the terminal OFF and ON.
❖
[Settings] In
* Data such as phonebook entries in the terminal can be saved in a
* Data such as phonebook entries can be backed up to Data center using
178
Warranty and After-Sales
Service
Warranty
The terminal is provided with a written warranty. Make sure
that you receive it. Check the written contents and items
such as "
purchase)" and keep it in a safe place. If it does not contain
the necessary information, immediately contact the shop
where you bought it. The warranty is valid for a period of
one year from the date of purchase.
This product and all accessories are subject to change, in
part or whole, for the sake of improvement without prior
notice.
Since troubles, repair or other handling of the terminal may
cause contents in the phonebook etc. to be altered or
deleted. DOCOMO recommends making a copy of the
Phonebook data etc., in case.
microSD card.
Data Security Service (subscription is required).
(Shop name/date of
Appendix/Index