Docomo STYLE N-02A Instruction Manual

Table of Contents

Quick Links

Download this manual

docomo STYLE series

N-02A

'08.11

ISSUE DATE:

NAME:

PHONE NUMBER:

MAIL ADDRESS:

INSTRUCTION MANUAL

Easy Search/Contents/Precautions

Before Using the Handset

Voice/Videophone Calls/PushTalk

Sound/Screen/Light Settings

Security Settings

i-mode/i-motion/

i-Channel/i-concier

Full Browser/PC Movie

i-αppli/i-Widget

Osaifu-Keitai/ToruCa

Map/GPS Function

Data Management

Convenient Functions

Character Entry

Network Services

PC Connection

Appendix/Troubleshooting

Index/Quick Manual

Phonebook

Mail

Camera

1Seg

Music

Overseas Use

简易手册

簡易手冊

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the STYLE N-02A and is the answer not in the manual?

Questions and answers

Summary of Contents for Docomo STYLE N-02A

Page 1 Easy Search/Contents/Precautions Before Using the Handset Voice/Videophone Calls/PushTalk Phonebook Sound/Screen/Light Settings Security Settings Mail docomo STYLE series i-mode/i-motion/ i-Channel/i-concier N-02A Full Browser/PC Movie ‘08.11 Camera ISSUE DATE: 1Seg NAME: Music i-αppli/i-Widget PHONE NUMBER: Osaifu-Keitai/ToruCa MAIL ADDRESS: Map/GPS Function INSTRUCTION MANUAL...
Page 2: Notes On Use
The user hereby agrees that the user shall be solely responsible for the result of the use of SSL/TLS. Neither DOCOMO nor the certifier as listed herein makes any representation or warranty as for security in the use of SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certifier shall be responsible for any damage or loss.
Page 3: How To Use This Manual
How to Use This Manual In this manual, the following methods are available to find the descriptions of functions and services. p.506 Index You can find keywords and functions displayed on the display of the FOMA terminal. Easy Search See the next You can find often-used functions and convenient functions page for details.
Page 4: Table Of Contents
How to Use This Manual (continued) Following example shows how to look up the alarm function using “Index”, “Easy Search” and “Index on the front cover”. p.506 Index You can find keywords and functions displayed on the display of the FOMA terminal. Activate i-αppli from ToruCa.
Page 5 This manual uses illustrations and marks to explain how to operate the function so that you can use the FOMA terminal correctly. Describes the function name. Describes the Snooze setting……Set whether to use a Using the Alarm Function snooze (repeating) alarm. necessary <Alarm>...
Page 6 Easy Search Easy Search Find out a function with easy words from the Easy Search index below. Useful functions for talking ・ Show/Hide caller ID p.46 Caller ID Notification ・ Switch voice/videophone call during call p.51 ・ Adjust the volume during a call p.63 Volume ・...
Page 7 Master mail ・ Send Deco-mail p.148 Deco-mail ・ Send image or melody p.153 Attach file p.168 ・ Sort and save mail automatically Auto-sort Master camera ・ Change the size of image to shoot p.225 ・ Display the shot p.316 My picture p.342 ・...
Page 8: Contents
How to Use This Manual............1 Easy Search ................4 Contents .................6 Main Features of N-02A ............8 Contents Precautions ................10 Notes on Handling ..............16 Package Contents ..............19 aPart names and functions aViewing the display Before Using the aSelecting the menu aBasic operations aFOMA card (UIM) Handset aAttaching/Removing the battery pack aCharging aTurning the power on aInitial settings aTime settings...
Page 9 aSetting channels aWatching 1Seg programs aData broadcast 1Seg a1Seg recording aBooking program/Timer recording p.243 a1Seg settings, etc. ® aMusic&Video Channel aDownloading Chaku-Uta-Full Music aPlaying music aUsing playlist aUsing the Music Player, etc. * “Chaku-Uta-Full” is a registered trademark of Sony Music p.255 Entertainment (Japan) Inc.
Page 10 Main Features of N-02A ■ →p.206 ■ i-concier Chinese text entry supported →pp.406, 520 i-concier is a service where Machi-chara (character on the standby screen) delivers useful information. You can display/enter Chinese (Simplified/Traditional) Also, download schedules (i-schedule) from sites to in i-mode mail/SMS, on the i-mode/Full Browser site make better use of the service.
Page 11 ■ ■ → p.150 PDF viewer/Document viewer Auto Deco-mail → pp.357, 359 The FOMA terminal detects emotion from the mail text and automatically converts the mail to Deco-mail • You can easily view useful information in PDF with suitable decorations such as pictograms. format such as a map, catalogue or time table on your FOMA terminal.
Page 12 FOMA Dry Battery Adapter 01 Indicates that you must unplug FOMA USB Cable with Charge Function 01/02 the power code from the outlet. FOMA Portable Charging Adapter 01 * For information on other compatible products, Unplug contact a docomo Shop or service counter.
Page 13 WARNING If your child uses the FOMA terminal, instruct him/her on how to use it. Make Do not put the battery, FOMA terminal, sure that he/she always uses the FOMA adapter/charger or FOMA card (UIM) in terminal correctly as you instruct. a microwave oven or pressurized Improper usage could result in bodily injury.
Page 14 Please turn off your FOMA terminal If the display or camera lens is broken, when inside an airplane, hospital, or be careful with the broken glass and other area where use is prohibited. any exposed FOMA terminal parts. The display and camera lens surfaces are The device may affect electronic or medical covered by plastic to minimize the possibility equipment.
Page 15 In some types of vehicle, using the 3. Precautions for the Battery FOMA terminal may interfere with the Pack operation of the vehicle’s electronic equipment. ■ Refer to the information shown on Do not use the FOMA terminal if doing so may impair safe driving.
Page 16 Do not put heavy objects on the power the terminals of a used battery pack and cord of the adapter/charger. return it to a docomo Shop or service Doing so may cause electric shock or fire. counter, or dispose of the battery pack in Don’t...
Page 17 If the fuse in the DC adapter blows, 6. Precautions for Use Near always replace it with the specified Electronic Medical Devices type of fuse. Using the unspecified fuse may cause fire or ■ According to the Guidelines on the malfunction.
Page 18: General Notes
FOMA terminal. water exposure; tests determine that corrosion has Please be aware that DOCOMO bears no occurred due to water exposure, condensation, or obligation or responsibility in the event that data is perspiration. These cases are not covered by the altered or lost.
Page 19 FOMA card (UIM). c Depending on the usage condition, the Please be aware that DOCOMO bears no battery pack may inflate slightly when the obligation or responsibility in the event that data is battery life is almost over. This is not a altered or lost.
Page 20 Bluetooth. enough distance between the FOMA c Please be aware that DOCOMO is not terminal and the reader/writer. Also, make responsible for data leak when making data sure that there is no radio station using the communications using Bluetooth.
Page 21: Package Contents
Package Contents <Main Components> N-02A N-02A INSTRUCTION MANUAL (Including the warranty and Back (This manual) Cover N33) * The Quick Manual starts on p.520. CD-ROM for N-02A Battery Pack N16 * This CD-ROM contains PDF data: “Manual for PC Connection” and “Kuten Code List”. <Optional Equipment>...
Page 23 Before Using the Handset Part Names and Functions ..................... Viewing Display....................... How to View the Indicator Display (Rear Panel Display)..........Function Display and Key Operations................i-Widget Display and Operations ..................Selecting Menu ....................... Basic Operations on the Screens ................... Description of the Operations ..................Function Menu ........................
Page 24: Part Names And Functions
Part Names and Functions & * The 1Seg antenna is built-in. <Using Earphone> Flat-plug earphone/microphone with switch (optional) connection example Connect an external-connector-compatible earphone Phone plug (optional). Flat-plug of ② ① To use an incompatible earphone, connect an adapter earphone/ converter (optional).
Page 25 pFunction key 2 q/Manner key • Set Manner mode (1 second or longer) → p.101 • Perform the function displayed on this key→p.28 • Display the i-mode menu • Enter “#”, punctuation marks, etc. → p.455 Multi-function keys & Mouthpiece/Microphone f/g Up/Down key Charging terminal •...
Page 26: Viewing Display
FOMA antenna Monaural speaker • The antenna is built-in. To make calls under microSD card slot • Insert a microSD card → p.337 better condition, do not cover the antenna part with your hands. Back cover Rear camera * In this manual, @, a (マナー ) and s (C) are referred to •...
Page 27 ■ Indicator display 1 5 7 & 9 Icon display area ● Icons indicating the status of the FOMA terminal 3 5 7 9 Icon Description 4 6 8 Unread MessageF/Full →p.175 (Red) / / / Unread message R and F (in red when full)→...
Page 28 Icon Description Icon Description & GPS positioning→p.301 Remote monitoring (Auto manner mode set ON/OFF)→pp.72, 101 Invitation report (i-αppli call)→p.284 Public mode (Driving mode)→ p.64 (blue) Bluetooth power on (Light)/ Bluetooth connected (Flash)→p.390 Music&Video Channel booking →p.257 Bluetooth call in progress → p.392 Alarm notification function (Black) In Bluetooth power saver mode...
Page 29: How To View The Indicator Display (Rear Panel Display)
How to View the Indicator Display (Rear Panel Display) On the indicator display, incoming call, mail or alarm notifications appear with various messages, images or animations. ● Display example Clock (Digital 1) Alarm notification Chaku-moji Receiving call Missed call/New mail On hold Timer recording GPS positioning...
Page 30: Function Display And Key Operations
Displaying the clock to check time Press a (マナー ) or s (C) with the FOMA terminal folded to turn the indicator display on and display the clock. When you press s (C), the clock is displayed and the current time is read out at the same time (when there is no missed call, new mail, etc.) (Japanese mode).
Page 31: Selecting Menu
Selecting Menu You can run, set, and check the FOMA terminal’s functions in a variety of ways. There are various methods although a function is generally selected from the main menu. Selecting functions from the main menu You can select various functions of the FOMA terminal from the main menu, which appears when you press i on the standby screen.
Page 32 Accessing functions with shortcut keys On each screen, you can access a function easily by pressing the function key pre-assigned to the function. Press the function key on the standby screen Pressing o displays Pressing p displays Pressing u displays the Mail menu.
Page 33 Searching menu items to access functions Even if you do not know the procedure to access a function, you can still access the desired function by entering keywords to search menu items. <Example: To access “Select ring tone”> Press i on the standby screen, then press u (FUNC), and highlight “Search”...
Page 34: Select An Item
Accessing functions by selecting menu numbers When the main menu is set to “Standard” (p.32), you can access functions quickly by pressing the keys pre-assigned to the menu numbers (p.440). <Example: To access “Select ring tone”> Press i on the standby screen, then press 13 Changing the main menu You can change the design of the main menu (background, icon, etc.).
Page 35: Basic Operations On The Screens
■ To change the main menu temporarily Highlight an item on the theme screen and press o (Change) to change the main menu temporarily. When the main menu is displayed again, the previously set main menu appears. When you set the menu that can be customized, you can sort the menu items by pressing u (FUNC) in the main menu and selecting “Manual-sort”.
Page 36: Entering Numbers
● To select YES/NO or ON/OFF Use c to move the frame, then press d (Select) ● To display an image in the picture list Use b to move the frame, then press d (Disp.) ● Entering your security code Enter a 4 to 8 digit security code, then press d (Set) The entered security code appears as a “...
Page 37: Description Of The Operations
Description of the Operations In this manual, instructions for menu operations are briefly described in almost all cases as follows. The operation description example and the actual operations ① ② ③ ④ ⑤ i “LifeKit” “Alarm” Highlight the item to set u (FUNC) : Press i on the standby screen.
Page 38: Function Menu
Function Menu “Function menu” is one of the menus that can be accessed from the function display. The function menu activates supplementary functions of each screen. For example, you can use the function menu to delete mail after reading it, or to select the folder to save an image you captured with the camera.
Page 39 ● Selecting multiple items When you delete unnecessary data, protect important data or move the data to prevent others from viewing to the Secret folder, you can select not only one data or all data but also multiple data. In this case, perform the following operation: <Example: To delete multiple mail on the Received mail list screen>...
Page 40: Using The Foma Card (Uim)
Security codes Using the FOMA Card (UIM) You can set 2 PIN codes on the FOMA card (UIM) for your FOMA terminal, the PIN1 code and PIN2 code. The FOMA card (UIM) is an IC card that contains → p.122 private information such as your phone number.
Page 41 A FOMA card (UIM) that was inserted when you Settings for replacing the FOMA card (UIM) downloaded or received data or files is hereinafter referred to as “your FOMA card (UIM)” and other When you replace the FOMA card (UIM) inserted to FOMA cards as “other FOMA card (UIM)”.
Page 42: Attaching/Removing Battery Pack
● Removing Attaching/Removing Battery Pack Remove the back cover Remove the battery pack Make sure to turn the power off before removing Press the tab on the side of the battery pack in the battery pack. Also, keep the FOMA terminal direction ①...
Page 43: Charging
■ Battery usage time (the duration varies charging. depending on the charging time and the To protect the environment, bring deterioration of the battery pack) used battery packs to a docomo Continuous standby time Shop, agency, recycle shop, etc. [FOMA/3G] Stationary (“Auto” ): Approx. 550 hours In transit (“3G”...
Page 44 • If “3G/GSM setting” (p.430) is set to “3G”, the talk Plug the AC adapter into the outlet (or communications) and standby times will be Plug the DC adapter into the longer when using it in Japan. cigarette lighter socket in your car ■Battery pack charging time Charging starts.
Page 45: Checking Battery Level
AC adapter or DC adapter. Contact message to the other party) appears during a a docomo Shop or service counter. videophone call. The call is disconnected in about The DC Adapter uses a 2A fuse. If the fuse (2A) 20 seconds and the power turns off in about 1 blows, always use the dedicated fuse.
Page 46: Turning The Power On/Off
Turning the power off Turning the Power On/Off <Power ON/OFF> y (2 seconds or longer) The shutdown screen “SEE YOU” appears and Turning the power on the power is turned off. Before turning the power on, make sure that the Switching between Japanese FOMA card (UIM) is inserted correctly.
Page 47: Setting Clock
Set whether to send location ……Enter date and time in Manual (Date time set) the main clock manually. Select the time zone, then information via the GPS function enter date and time. → p.307 ■ To enter date and time If “Permit to send loc.”...
Page 48: Notifying The Other Party Of Your Phone Number
Checking Your Own Phone If “Size” under “Clock display” is set to “Up Small”, Number <My Profile> the sub clock is not displayed. When this function is set to “Auto”, the sub clock displays the Japan Standard Time when the time Display and check your phone number (own number) zone of “Set main time”...
Page 49 Voice/Videophone Calls/PushTalk ■ Making a voice/videophone call Making a Voice/Videophone Call ..................Switching a Voice/Videophone Call during a Call ............WORLD CALL Making an International Call ..............Handsfree Using Handsfree during a Call................. Redial/Dialed calls/Received calls Using the Redial/Dialed Calls/Received Calls History ..Chaku-moji Using Chaku-moji ..................
Page 50: Making A Voice/Videophone Call
r (voice call), o (V.phone) Making a Voice/Videophone Call <Voice call> “ ” flashes while dialing and lights up during the Enter the phone number of the call. other party ■ If you hear the busy tone Always start with the area The line is busy.
Page 51 Videophone ■ To switch a voice/videophone call during a You can use the videophone call function call → p.51 between terminals that support the DOCOMO videophone system. ■ To put the current voice/videophone call DOCOMO’s Videophone is compliant with the on hold →...
Page 52 V.phone settings……Set the screen for videophone Enter phone number screen calls. (p.48) Visual prefer.……Select Normal/Prefer img qual/ Notify Caller ID→ p.58 Prefer motion spd for an image sent to and received from the other party. Prefix numbers→p.59 This setting is only retained during the call. →...
Page 53 ● If a videophone call is not connected Switching a Voice/Videophone When a videophone call is not connected, the cause Call during a Call of the failure appears. The cause may not appear depending on the situation. You can use this function with terminals compatible with voice call/videophone call switch.
Page 54: Making An International Call
(V.phone) after following the dialing procedure etc., “0” is required. r “Dial” below. Visit the NTT DOCOMO website for countries The international call is made. and operators. ■ To make a call without converting “+” into In some types of the other party, international the IDD prefix code videophone is not available or the other party’s...
Page 55: Using Handsfree During A Call
Open the function menu and add the country code when making international and IDD prefix code to make an international call. calls. Visit the NTT DOCOMO You can use the international dialing function on website for country codes. the Enter phone number screen or Phonebook/ Highlight an item Received calls/Dialed calls/Redial detail screen.
Page 56 ● Notes on use Highlight a Redial/Received calls entry It is recommended that you keep a distance of about 30 cm from the FOMA terminal during a handsfree ■ To make a call after call. If it is too close or too far, the other party may find checking the details of it difficult to hear you or your voice may sound the Redial/Received...
Page 57 Icon Description Redial/Dialed calls/Received Incoming and Outgoing/Missed/ calls screen (p.54) Unconfirmed missed 64K data communication Notify Caller ID →p.58 Incoming remote monitoring *1*2 →p.59 Prefix numbers Incoming packet communication or *1*2 →p.56 Chaku-moji 64K data communication that is received without an external device *1*2 Int’l call →p.53...
Page 58 “Redial”, “Dialed calls” or “Received calls”. For details on Chaku-moji and the compatible models, refer to the NTT DOCOMO website or <Example: To make a call with Chaku-moji from the “Mobile Phone User’s Guide [Network Services]”. enter phone number screen>...
Page 59: Detail
r (voice call), o (V.phone) ● When you receive a voice or videophone call with a message The Chaku-moji appears on the ringing screen. The Chaku-moji disappears when you answer the call. The received Chaku- moji is displayed in 3D animation.
Page 60 Showing/Hiding Caller ID Sending Push Signals When Making a Call Quickly <Pause dial> Use services such as ticket ordering or checking Adding the “186”/“184” prefix to the bank balances by sending push signals from the other party’s phone number FOMA terminal. To show your caller ID, add the “186”...
Page 61: Using The Prefix Function
Enter a number (prefix) Transmitting dialing data as pause dial You can enter up to 10 digits. i “Settings/Service” Prefix setting screen (p.59)/ “Dialing” “Pause dial” d (Send) IDD Prefix setting screen (p.53) Dial the phone number of the Edit, Delete this, Delete , Delete all……Select an destination r...
Page 62: Reconnect
Setting the Alarm for The effect may vary depending on the other Reconnection <Reconnect signal> party’s voice, etc. The ambient noise detected via the microphone activates this function. It may be activated by your When the signal quality deteriorates during a voice/ videophone call or PushTalk communication and the voice.
Page 63 Display while receiving a call Receiving a Voice/ ■When the other party’s phone number is Videophone Call notified The other party’s phone number appears on the screen. When the caller is stored in the Receive a voice or videophone phonebook, the name stored in the phonebook call appears (only the name is displayed while Keypad lock is set).
Page 64 ■ When the other party switches a videophone call to a voice call You can set the operation for calls from callers not Videophone in-call screen (p.48) The other stored in the phonebook.→ p.138 party switches to a voice call You can set restrictions for each phone number The videophone call is switched to the voice call.
Page 65: Adjusting The Ring Volume
Adjust the volume between 6 steps from Folding the FOMA Terminal to “Level 1” (quietest) to “Level 6” (loudest). End/Hold Calls ■ To adjust the earpiece volume during a <Setting when folded> call During a voice call: c (1 second or longer) Set the operation to be performed when the FOMA During a videophone call: c terminal is folded during a voice or videophone call.
Page 66: Using The Public Mode
Holding Incoming/Current Using the Public Mode Calls <On hold/Holding> Public mode (Driving mode/Power OFF) is an automatic answering service provided for public <Example: To put an incoming call on hold> places and circumstances in which mobile phones While ringing y should not be used.
Page 67 Using Public mode (Power OFF) The Public mode setting takes priority when <Public mode (Power OFF)> Manner mode is set at the same time. When Public mode (Power OFF) is set, a caller who If you make an emergency call (110, 119 or 118) made a call while the power is off hears a message while Public mode is set, Public mode is released.
Page 68 Setting the notification method for When You Cannot Answer an missed calls <Info notice setting> Incoming Call <Missed call> Set the notification method to be performed when s (C) is pressed with the FOMA terminal folded. When you could not answer an incoming call, The setting items and notification methods using appears on the standby screen.
Page 69 When “Record message” is set to Having the Caller Leave a “ON” and you receive a call Message <Record message> Record message activates when the set time has elapsed. Have the caller leave a message on your FOMA The voice caller hears the answer message, and terminal when you cannot answer a voice or recording starts.
Page 70: Having The Caller Leave A Message For An Incoming Call
Select an item to play Having the Caller Leave a Message for an Incoming Call <Record message/Voice memo/Auto voice memo> <Quick message> A beep sounds and playback starts. When the playback ends, two short beeps sound and the Even when “Record message” is not set to “ON”, you “Play/Erase msg.”...
Page 71: Auto Redial As Voice
Setting Videophone When 2in1 is in A mode or B mode, “ ★ ” does not Functions appear for a message recorded under the unused phone number. When set to “Dual mode”, “ ★ ” appears for messages recorded under both phone i “Settings/Service”...
Page 72 Setting an image to send during Setting the answer mode for a videophone calls videophone call incoming during <Select image> i-mode <V-phone while packet> Set an image to send instead of the camera image. You can set a JPEG image whose file size is 100K As the multi access function cannot be used for bytes or less and not larger than 854 dots wide ×...
Page 73 Decorating the videophone call screen <Auto redial as voice> <Decoration> When a videophone call is switched and redialed Decorate your videophone call screen (your camera as a voice call, not digital communications image) with a stamp and frame. charges but voice call charges apply. When a call is redialed, only the voice call is Videophone in-call screen (p.48) logged in “Redial”/“Dialed calls”.
Page 74: Using Videophone Connected To External Devices
Videophone settings screen (p.69) refer to the manuals supplied with the external “Remote monitoring” Enter devices. your security code “Other ID” “ドコモテレビ電話ソフト” (DOCOMO Videophone Software) (Japanese) is compatible with this function. Download the software from the website (Japanese). (For details on the PC operating environment, etc.
Page 75 ■ To answer a videophone call on the Position the FOMA terminal receiving phone without accepting remote During remote monitoring, the image captured monitoring with the front camera is sent to the dialing phone. Press r before the ringing time elapses Place the receiving FOMA terminal in the To answer with a substitute image, press monitoring position, and make sure it is switched...
Page 76 (talk). other parties continue the call. → p.75 For details on PushTalk and compatible models, refer to the NTT DOCOMO website or “Mobile Phone User’s Guide [Network Services]”. <Dial> You can also make PushTalk calls using the ●...
Page 77: Pushtalk Call
● Joining an ongoing PushTalk call <End> Perform the following steps to rejoin an ongoing When “Setting when folded” (p.80) under PushTalk call or join after you answered with PushTalk setting is set to “End the call”, you can “Disconnected” when the call arrived: end a PushTalk call by folding the FOMA terminal <Example: To join using “Redial”>...
Page 78: Pushtalk Call
Adding Members during a A party using a terminal that is not capable of PushTalk Call adding participants can be added. The added member does not appear on a terminal that is not capable of adding participants, and the beep does Call and add a new member to the current PushTalk not sound.
Page 79: Pushtalk Phonebook
Open the Phonebook detail screen Use v to select a phone Pressing s (C) or q while a call is being received does not activate “Quick message” but number disconnects the call. “Disconnected” appears on A screen appears asking whether to add to the the other party’s terminal.
Page 80: Add Member
● Adding a member to a group Adding entries to the PushTalk phonebook from Redial, Dialed calls, Add members to the member list in advance. → p.77 etc. Up to 19 members can be added to a group, but a call can only be made to up to 4 members simultaneously.
Page 81 Making calls from a PushTalk group Making a Call Using the PushTalk Phonebook In the group list Highlight a group @ Select members from the PushTalk phonebook and A call is made to all members of the highlighted make a call. group.
Page 82 Setting PushTalk Deleting an Entry from the <PushTalk setting> PushTalk Phonebook Configure PushTalk settings. <Delete PushTalk phonebook> PushTalk phonebook screen Delete members, groups or group members from the (p.79) u (FUNC) “PushTalk PushTalk phonebook. setting” Select any item: Open the list to delete Member list : Open this list to delete members Auto answer setting……Select whether to answer...
Page 83 Call Forwarding……Forward the call to the forwarding number if you have subscribed to the Call Forwarding service, regardless of the Activate/Deactivate setting of Call Forwarding. If you have not subscribed to the service, the “Answer” setting works. Hands-free setting……Set whether to automatically activate handsfree when a PushTalk call starts.
Page 85 Phonebook Phonebooks Available for the FOMA Terminal ............... Add to phonebook Adding Entries to the FOMA Terminal Phonebook ....... Adding Phonebook Entries from Redial/Dialed Calls etc..........Renaming Groups..................Group setting Making a Call from Phonebook............Search phonebook Edit phonebook Editing Phonebook Entries ..............Delete data Deleting Phonebook Entries ................
Page 86 • Secret code setting→ p.90 Phonebooks Available for the • Adding members to PushTalk phonebook → p.78 FOMA Terminal ■Features of the UIM phonebook Since phonebook entries are stored on a FOMA card (UIM), you can also use the same phonebook entries Your FOMA terminal has Phonebook in the FOMA on another FOMA terminal simply by changing FOMA terminal (Phone) for which you can set a range of...
Page 87 “@” symbol. double-byte or 100 single-byte kanji, hiragana, However, if the contact’s mail address is “phone katakana, alphanumeric characters and pictograms number@docomo.ne.jp”, store only the phone for the address. number as the mail address. Attach location……Select From position loc./ If you use 2in1, “Phonebook 2in1 setting”...
Page 88: Adding Phonebook Entries
“Add” Search for a phonebook When phonebook editing is interrupted entry Searching the phonebook → p.88 You can resume phonebook editing that was stopped ■ To add a new phonebook entry e.g. because the battery ran out or a new task of Tool “New”...
Page 89: Making A Call From Phonebook
Select a group Enter a new group Searching for the phonebook entry of name the person you want to call The “ ” displayed with a group indicates it is a i “Phonebook” “Phonebook” group on the FOMA card (UIM). If the same name is used for a groups on the ■...
Page 90 Searching for the phonebook entry by Search column…… Press the key for the column (tab) you want to search specifying the search method 1: “ あ (a)” column 2: “ か (ka)” column 3: “ さ (sa)” column 4: “ た (ta)” column Search for a phonebook entry using any of 8 search 5: “...
Page 91 →p.354 ……Move the displayed phone number or Send Ir data Move to top mail address to the top when multiple phone numbers or →p.354 Send all Ir data mail addresses are stored in one phonebook entry. No. of phonebook→ p.91 *1*2 →p.77 Add to PushTalk...
Page 92: Deleting Phonebook Entries
When the edited entry is stored to the PushTalk When the mail address of the other party is “phone phonebook or Choku-Den, the PushTalk number@docomo.ne.jp” and he/she sets a secret phonebook or Choku-Den is also changed code, you have to specify “phone number + secret automatically.
Page 93 Ring tone/Image is disabled when the caller does Checking Phonebook Storage not show the caller ID. It is recommended that you Status set the “Caller ID Request” service. <No. of phonebook> Phonebook detail screen (p.87) u (FUNC) “Ring tone/Image” Phonebook list screen (p.87) “...
Page 94 (Phone) phonebook from the “Choke-Den” is activated when you receive SMS or the sender’s screen and then store it to Choke-Den. mail address is “phone number@docomo.ne.jp”. Up to 5 entries can be stored. Refer to the following pages for the priority when...
Page 95 “View phonebook” Search for a Choku-Den screen (p.92) phonebook entry Searching the phonebook → p.88 Store, Edit……Store information in a Choku-Den with no information stored, or edit a Choku-Den with information ■ To store data after adding it to the already stored.
Page 97 Sound/Screen/Light Settings ■ Sound settings Select ring tone Changing the Ring Tone ................Stereo&3D sound Setting Sound Effect for Ring Tones and Melodies........ Vibrator Setting the Vibration to Notify You of Incoming Calls.......... Melody Call setting Changing the Ringback Tone............... Keypad sound Setting the Keypad Sound .................
Page 98: Changing The Ring Tone
■ To set the calling/receiving display Changing the Ring Tone “Select calling disp.” or “Select receiving disp.” On “Select calling disp.”, select an image from <Select ring tone> My picture or i-motion. On “Select receiving disp.”, select an image from Set the ring tone and receiving screen for voice call, My picture.
Page 99 Ring tone operation or another FOMA terminal via infrared data Multiple mail are Play the ring tone set for exchange, iC communication or DOCOMO received the last received mail. keitai datalink (p.437), then returned to the Play the ring tone set for...
Page 100: Setting Sound Effect For Ring Tones And Melodies
Setting the Vibration to Notify Setting Sound Effect for Ring You of Incoming Calls Tones and Melodies <Vibrator> <Stereo&3D sound> Set vibration patterns to notify you when you receive Get rich and exciting sounds of melodies, ring tones a voice call, videophone call, PushTalk call or mail. for voice/videophone/PushTalk call or mail, sound i “Settings/Service”...
Page 101: Changing The Ringback Tone
Setting the Notification Tone Changing the Ringback Tone and Illumination for GPS <Melody Call setting> Function Set whether to change the ringback tone heard by the other party (YES/NO) when you receive a voice call. Set the notification tone and illumination for Position i “Settings/Service”...
Page 102: Quality
Setting the Open-Close Alarming You before the Line Sound is Disconnected <Open-Close sound> <Quality alarm> Set sound to be played when the FOMA terminal is Emit an alarm tone to warn you that the signal quality opened or closed. is deteriorating and the line is likely to be disconnected.
Page 103: Hearing The Ring Tone From The Earphone And Speaker
During a call, a short double-beep (“bibip”) Hearing the Ring Tone from sounds and a message appears indicating that the manner mode is set. the Earphone and Speaker ■ To release the manner mode <Headset usage setting> On the standby screen q (1 second or longer) or a ( マナー...
Page 104: Auto Manner Mode
● When auto manner mode is set Highlight an item to set o (Edit) The following icons appear on the standby screen: : Auto start is set Select any item: : Auto release is set Time setting……Enter time to set or release : Auto start is set/Remote monitoring When manner mode is set by pressing q automatically.
Page 105 Manner Super Original Item mode silent (Original manner mode settings) Holding tone Silent “Phone vol.” setting Played at a given volume when set to other than “Silent” On hold tone Silent “Phone vol.” setting Played at “Level 2” when set to “Step” Low-voltage alarm “LVA tone”...
Page 106 Mail vol.……Set the ring tone volume for mail, chat Changing Manner Mode mail, packet communication, MessageR/F, i-concier Settings information and i-αppli call. →p.63 <Manner mode set> →p.370 Alarm vol. Select the manner mode operations. →p.276 i-αppli vol. i “Settings/Service” However, “Step” cannot be set. “Incoming call”...
Page 107 Select any item: Changing the standby screen image Stand-by display……Change the standby screen The image may change depending on the display image. →p.105 timing, etc. Wake-up display……Set a message or image When Calendar or i-αppli display is set while displayed when the power is turned on. Machi-chara is set, the Machi-chara is released.
Page 108: Standby Screen
Setting the Color for Caller ID i-motion set as the standby screen is played when Display <Disp. call/receive No.> the FOMA terminal is opened. To stop playback, press t or @. When playback ends, the first frame appears on the standby screen. Display names, phone numbers and mail addresses When a Flash movie, GIF animation or original on the Redial/Received calls screen or Sent/...
Page 109: Changing The Display Design
Setting the Display and When “Key backlight” under “Illumination” is set to Keypad Lighting <Backlight> “OFF”, the key backlight does not turn on. You cannot set or release ECO mode while text is edited or i-αppli is active. i “Settings/Service” ECO mode is released when powering on/off.
Page 110: Changing The Menu Display
Changing the main menu screen Changing the Menu Display Change the icons and background image used on the main menu selection screen. Setting the menu display mode Menu display set screen (p.108) <Menu display set> “Theme” “Original theme” Change the display of the “Settings/Service” branch options (functions) or the main menu design.
Page 111 Creating an original menu Setting the Display Mode of <Original menu> the Indicator Display You can add often-used functions as “Original menu” <Indicator display> and quickly call them. → p.31 Up to 10 original menu items can be added. Set the display mode of messages or clock on the The main items of “Mail”, “i-mode”...
Page 112 When a phone/videophone call with Chaku-moji When multiple mail or MessageR/F are received arrives, the Chaku-moji appears on the indicator simultaneously, the following illumination display (the Chaku-moji and receiving indication operations are performed: appears alternately). However, when “Called” is Received content Illumination operations set to “OFF”, the Chaku-moji does not appear.
Page 113: Setting Key Illumination Flash
Select any item: Setting Illumination Flash for Power ON, Power OFF……Set whether to flash Handset Closing when the power is turned on/off. <Closed illumination> Incoming call, Dialing……Set the flashing pattern for voice/videophone calls and PushTalk calls. i “Settings/Service” “Other Talking start……Set the flashing pattern when a settings”...
Page 114: Select A Folder
Setting the Image Display <Event> Mode <Image display mode> The flashing pattern of key illumination on New Year’s Day, the eve of the beginning of spring, Christmas, etc. is dedicated to each event. Select “Normal”, “Vivid” or “Dynamic” for the FOMA The eve of the beginning of spring will be always terminal display mode.
Page 115: Setting The Clock Display
A part of Machi-chara may not appear depending Even if “Font type” is changed, the Chinese font on the action. does not change. The following menus are also available to change the font size: Changing the Font <Font> Char. Input: CHG input size → p.397 Mail: Font size →...
Page 116 Icon Operation performed when selected Using Desktop Icons/Desktop Receive Ir data: The Receive Ir data screen Info <Desktop icon> Dictionary: The Dictionary screen Original menu: The Original menu screen Pasting often-used phone numbers or functions into Life history viewer: Life history viewer the standby screen as desktop icons allows you to Quick Search: Quick Search access those numbers or functions quickly.
Page 117 Using desktop icons to call data or Icon Operation performed when selected functions Booking program alarm failed: The Missed program info screen On the standby screen d The Birthday has come: The Birthday screen A desktop icon can be Accumulated charges exceed the cost selected.
Page 118 Setting the desktop display Desktop icon screen (p.115)/ Desktop screen (Theme/Detail) On the standby screen d (p.115) o (Settings) Select any item: Create icon ……Select an icon to paste from the Change desktop……Change the desktop theme. function name list, then select the theme. Display setting……Select Display always/Display at use.
Page 119 ■Desktop info items Displaying Desktop Icon Operation performed when Messages for New Mail in 3D Item selected Animation <3D display setting> What’s New Icon information: Desktop icon (p.114) or popup message (p.207) that provides information When the new mail, message or chat mail desktop New mail New mail: The Received mail icon is highlighted, the new mail subject or emotion-...
Page 120 Icon After selected Selecting Icons to Display on “Vibrator” or “Mail/Msg. ring the Standby Screen <Icons setting> time” selection screen Manner mode is not set: Enable/Disable b to select icons, date and time “Ring volume” or “Mail/Msg. ring time” selection screen displayed on the standby screen.
Page 121: Kisekae Tool Setting
When you use Kisekae Tool to change the menu Icon After selected display design, the menu structure may change in Date “Schedule” accordance with the frequency of use. Also, some “Set main time” when the time menu numbers assigned to functions do not work. is not set Main clock “Alarm”...
Page 122 Saving the current settings to “お気に入り” (Favorite) Kisekae Tool set screen (p.119) Highlight “お気に入り” (Favorite) o (Detail) The “Contents checking” screen appears. “No data” appears when nothing is stored. Contents checking Function menu p.120 u (FUNC) “Take Setting info” “YES”...
Page 123 Security Settings ■ Security code Security Codes Used on the FOMA Terminal ..............122 Changing the Security Code............Change security code PIN setting Setting PIN Codes ..................Releasing PIN Lock ......................123 ■ Restricting operations and functions on mobile phone Dial lock/Omakase Lock Restricting Others from Using............
Page 124: Foma Terminal
* For details on “My docomo” and “ 各種お申込・お手続 Security Codes Used on the き” (Various applications), see the back of the back cover of this manual. FOMA Terminal ■i-mode password You will need a 4-digit “i-mode password” to register or...
Page 125: Releasing Pin Lock
PIN1 code (ON/OFF) when the power is turned on. location information service such as DOCOMO’s imadoco search) ○: Available X: Unavailable *: Voice, videophone, or PushTalk calls cannot be made. If a PushTalk call arrives, no arrival action takes place and the call is recorded in Missed Calls.
Page 126: Releasing Dial Lock
All you have the “ (Missed alarm)”, “ (Missed program)” or to do is contact DOCOMO by telephone. Protect your “ (Recorded program)” desktop icon appears on privacy and Osaifu-Keitai. If Omakase Lock cannot be the standby screen.
Page 127 Preventing Others from When another function is active, the function is Viewing Your Phonebook or terminated and the FOMA terminal is locked (data Schedule Data being edited may be discarded before the function terminates). <Secret mode/Secret data only mode> Forced locking with Omakase Lock can be done even when other functions are operating.
Page 128 ■To view secret data Activate Secret or Secret data only mode, then view When you receive mail from a sender stored as the phonebook or schedule. secret data, the mail address is not recorded in Searching the phonebook → p.88 the Received address list regardless of this Checking your schedule →...
Page 129: Preventing Others From Viewing Data
Preventing Others from <Desktop icon> Viewing Data <Secret folder> When an image, movie or i-motion pasted as a desktop icon is stored in the Secret folder, it is not displayed even when the desktop icon is selected. Save images, movies, i-motion, received mail, sent When a Bookmark, received mail or sent mail mail, and bookmarks you want to prevent others from pasted as a desktop icon is stored in the Secret...
Page 130 ■Function menu (Data list screen) Restoring data in the Secret folder back to normal data My picture i-motion (p.319) (p.325) To restore the secret data to normal data, move the Display image i-motion info data from the Secret folder to another folder. Image info Memory info Memory info...
Page 131: The Standby Screen
Activating Original lock Customizing functions or data to be locked i “Settings/Service” “Lock/ You can store particular settings such as locking Security” “Lock” Enter your only the phonebook or restricting only the outgoing security code calls/mail to Original lock (High), (Mid.), or (Low) depending on the usage or purpose.
Page 132 [Table 1] Functions and data that can be locked with the Original lock Group Function Operations/Notes when locked Data disp. edit del. Mail Mail Lock mail activation. • You can view the Area Mail content. • The main text will not be read out by pressing @ with the FOMA terminal folded.
Page 133 • You can send location upon request from a party using a location information service such as DOCOMO’s imadoco search. * When data to be locked are pasted as “Desktop icon” on the standby screen, these desktop icons are not displayed...
Page 134 ● Operations when Keypad lock is set Category list screen (p.129)/ Group list screen (p.129) “ ” and “ ” appear on the screen while the Keypad lock is set. Select, Release, Select all, Release all……Select and Keypad lock locks all key execute any item.
Page 135 Using the IC card authentication Using IC Card Authentication <IC card authentic.> <Example: To release Dial lock/Keypad lock> Open the FOMA terminal when You can release Dial lock or Keypad lock or you can Dial lock/Keypad lock is set perform user authentication without entering the “...
Page 136: Disabling The Side Keys
Face recognition technology does not totally Disabling the Side Keys guarantee to recognize the user. Under no circumstances shall DOCOMO be liable for any <Side key guard> loss or damage caused by use of this product by a Disable the sidekey (@, a (マナー), s (C)) functions third party or lost opportunity to use this product.
Page 137 Face authentication screen Preventing Unwanted Mail (p.134) Display <Mail box lock/Folder lock> New image Lock Inbox, Outbox, Draft, Mail history box or other Edit image name folders so that mail in these boxes cannot be viewed Delete image by other people without your approval. To open locked mail boxes or folders, the security code is Function to reset……Select functions that can be...
Page 138 ■ To release a set function Restricting Incoming and Select a function with “ ★ ” Outgoing Calls for Specific The function is released and “ ★ ” disappears. Phone Numbers ■ To set restrictions for multiple phone <Restrictions> numbers Press t twice to return to the phonebook Restrict incoming and outgoing calls for each phone list screen Select a phonebook entry Perform...
Page 139 Rejecting Calls from <Call Forwarding> <Voice Mail> Unidentified Callers If you receive a call from the specified phone number, the ring tone sounds for about 1 second, <Call setting w/o ID> then the call is forwarded to the designated number or connected to the Voice Mail service Accept/Reject voice, videophone or PushTalk calls center, and the “Missed call”...
Page 140: Rejecting Calls From Callers Not In The Phonebook
When you receive a call from a phone number set If the mute time is longer than the ringing time for to “Reject”, the call is rejected even when “Voice Record message, Record message is activated Mail” or “Call Forwarding” service is set to without ringing first.
Page 141: Using Data Security Service
Schedule* (hereinafter referred to as “stored data”) i-mode, and mail transmission. This is useful when on your FOMA terminal at DOCOMO’s Data Center to you want to use the FOMA terminal without being be able to smoothly restore data if you lose your interrupted by incoming voice, videophone or FOMA terminal or when changing models.
Page 142 100KB cannot be stored or updated. subsequent phone number/mail address, accessing the Data Security Center from the PC site (My docomo) to delete the corresponding data enables updating phonebook. Deleting the whole phonebook of a single entry enables updating data in the Data Security...
Page 143 ● Checking communication logs with the Data Security Center You cannot save SMS in the FOMA card (UIM) to the Data Security Center. Up to 30 communication log entries can be stored. A file attached to i-mode mail is deleted before the If the maximum number of entries is exceeded, mail is saved.
Page 144: Security Code
● Storing/Updating/Restoring ToruCa/ ● Checking communication logs with Schedule at the Data Security Center the Data Security Center Data Security Service cannot be used when you Up to 30 communication log entries can be stored. are out of the i-mode service area or the power is If the maximum number of entries is exceeded, off.
Page 145 ル」のご案内 ” (Guide to Early Warning “Area It is recommended that you back up data stored Mail”) will be stored in Inbox. on the FOMA terminal by making notes, using DOCOMO keitai datalink (p.437), or a microSD card.
Page 146: Resetting Data Remotely
(UIM)) be reset. To set mail rejection quickly Spam Mail Prevention (か Inquiries んたんメール設 NTT DOCOMO corporate website 定 (Simple mail settings)) To reject i-mode mail from a sender Spam Mail From PC http://www.docomo.biz (Japanese) who has already sent 500 or more...
Page 147 Mail i-mode Mail ........................146 ■ Composing i-mode mail/Deco-mail Composing and Sending i-mode Mail......... Compose message/Send Composing Deco-mail ..................Deco-mail Auto Deco-mail Composing Auto Deco-mail ..............Decome-Anime Sending Decome-Anime................Template Using Templates to Compose Deco-mail/Decome-Anime ........ Attaching Files ....................Attach file Save i-mode mail Saving i-mode Mail to Send Later............
Page 148: I-Mode Mail
■ To enter a mail address directly i-mode Mail “Enter address” Enter a mail address Alphabets, numbers and symbols can be entered. Mail can be exchanged between i-mode users or When you enter a mail address, a new mail anyone who has an Internet e-mail address. address field appears below the filled field.
Page 149: New Mail
● Deco-mail pictogram If you send i-mode mail with pictograms to a non- Deco-mail pictograms are images that meet certain DOCOMO mobile phone, the pictograms will conditions, including moving pictogram. On your automatically be converted into similar ones used FOMA terminal, Deco-mail pictograms are by the recipient’s carrier.
Page 150: Message
Erase message <Undo> Delete After you select “Undo” to restore the text or decoration to the previous state, you cannot cancel “Undo”. <Change rcv. type> The addresses in the To and Cc fields will be visible to recipients. However, depending on the Composing Deco-mail terminal, device, or mailer used by the recipient, <Deco-mail>...
Page 151 Menu Description Depending on the i-mode handset, the recipient Restore the entered text or decoration to the previous state. will receive a mail containing a URL from which the Deco-mail can be viewed. Depending on the Decorate the entered text, or change/reset non-compatible handset, the recipient will receive the decoration.
Page 152: Auto Deco-Mail
Composing Auto Deco-mail Sending Decome-Anime <Auto Deco-mail> <Decome-Anime> The FOMA terminal will automatically select text Decome-Anime is a service that allows you to colors and backgrounds, as well as illustrations, etc. compose decorative mail using animation templates based on the emotional content of the mail. with Flash containing messages/images.
Page 153 New Deco-Anime screen You cannot insert a Deco-mail pictogram into the (p.150) Decome-Anime message field. You cannot change the font size of Decome-Anime. Select template→p.152 Positions where images or text can be inserted Preview depend on the template, and cannot be changed. Send→p.146 Header/Signature cannot be added to Decome- Anime.
Page 154 Select a template Using Templates to Compose • On the preview screen, use v to display the Deco-mail/Decome-Anime previous or next template. <Template> A template is a form for Deco-mail/Decome-Anime to which the layout and ornament are already set. Using a template allows you to compose Deco-mail/ Decome-Anime easily.
Page 155 Deco-mail template list screen Attaching Files <Attach file> (p.152)/Preview screen (p.152) Send i-mode mail with files attached. Compose message……Use templates to compose The following files can be attached: Deco-mail. → p.152 • Still image, image ……Sort templates by selected criteria. Sort •...
Page 156 ■ To send an image as i-shot to a mova terminal Depending on the recipient’s mobile phone model, You can send mail with an image attached as the sent image may be displayed incorrectly or i-shot to a mova terminal. may not be displayed.
Page 157 Sending draft i-mode mail Storing Addresses in Blog/ Mail Member o “Draft” By storing addresses in the Blog/Mail member, you can easily contribute images to blog or easily enter multiple addresses simply by selecting the Blog/Mail member. Mail address in the main text can be added to Blog/ Mail member.
Page 158: Auto Receive Mail
If no operation is performed for about Blog/Mail member detail 15 seconds while the received result screen is screen (p.155) displayed, the previous screen reappears for mail and the Detail screen appears for Edit address message. The display duration may vary depending on the “Mail/Msg.
Page 159 ● Emotion-expressing mail Decome-Anime is automatically played when An icon expresses the emotion matching the content selected on the Mail list screen. If played repeatedly, of the received mail. When the received mail detail press t to return to the Mail list screen. screen (p.164) is displayed, the key illumination The “Start attachment (auto)”...
Page 160 When received mail contain keywords for the Receiving mail selectively emotion-expressing mail icon and the Disp keyword icon, the Disp keyword icon is displayed. o “Receive option” The filter function is available to pick up messages You can also access “Receive option” as follows: with the specified emotion-expressing mail icon.
Page 161: Replying To I-Mode Mail
Even if “Receive option setting” is set to “ON”, Depending on the signal status, you cannot check performing “Check new messages” retrieves all for new mail or the checking may be interrupted. mail. If you do not wish to receive them, you must Even when i-mode mail is stored at the i-mode deselect the “Mail”...
Page 162 Adding Mail Addresses to When 2in1 is in B mode or Dual mode, you cannot Phonebook reply or reply with quote to i-mode mail sent to Address B. When data such as a melody or i-αppli activation Add the mail address or phone number of the sender specification is pasted into the main text, the of received mail to the phonebook.
Page 163 <Example: To check/save files attached to received Downloading attached files selectively mail> If the size of a mail including the main text, inserted Received mail detail screen (p.164) images and attached files exceeds 100K bytes, you Highlight a name of attached file cannot receive the attached files automatically when ■...
Page 164: Reading Out Mail
● Reading out main text of new mail Reading Out Mail when the FOMA terminal is open (Japanese mode) The voice may be heard by others during read out, <Example: When “Check new messages” is so move to a location where it will not disturb other performed>...
Page 165 ■Phone number If numbers are separated by hyphens “-” or Mail-linked i-αppli mail cannot be read out on the parentheses “(” “)” and recognized as general phone Received result screen but can be read out on the number, mobile phone number or toll-free number, Received mail detail screen.
Page 166 ■Others Reading i-mode mail Alphabets are read out in alphabetic reading, but may not be read out in alphabetic reading <Example: To read received mail> depending on the combination. o “Inbox” Select a folder Depending on the content of a sentence or Select a mail description (especially geographic names or proper nouns), it may not be read out or may be read out...
Page 167: Display Mode
Changing the mail font size or list display mode When “Mail list disp.” is set to “1 line+body” or “1 line”, the Mail history box list screen always ● Changing the mail font size shows mail in “Subject” mode. Press v for 1 second or longer on the mail detail ●...
Page 168 ③ Sent/Received time and date Guide to the mail list screen ③ -1 Time appears for mail sent/received today ③-2 Date appears for mail sent/received yesterday 1- 1 1- 2 or earlier 3- 1 3- 2 ④ Sender/Recipient, Subject, Information, etc. When there is no subject, “No title”...
Page 169 ⑥ Icon stored in the phonebook Icon Description When the mail address or phone number is stored Mail restricted by the FOMA card in the phonebook, the icon stored in the phonebook security function (use a FOMA card appears (UIM) different from the one used when the mail is sent/received) ⑦...
Page 170: Folder List
In the following cases, the mail address appears <No. of messages> You cannot check the number of the following instead of “Name” even when the phone number i-mode mail or SMS: or mail address is stored in the phonebook: • Messages in the Secret folder •...
Page 171 Enter the mail address domain (part that follows Select a mail address on the phonebook detail the @ sign) correctly. However, if the address screen format is “phone number@docomo.ne.jp”, enter the phone number only. ■ To add a mail address from the address list “Sent address”...
Page 172: List
……“Moving/Copying SMS from the Mail UIM operation Mail history box folder list screen”→p.350 screen (p.165) ……Display information such as sender. Mail info Edit folder name……Edit the folder name of a folder in No. of messages ……Display the total number of mail in Mail history box.
Page 173: Mail History Box Detail
*1*2 →p.178 Chat <Read all> Disp. SMS report If you view mail via the filter function and then transmission→p.355 select “Read all”, only the currently displayed mail is marked as read. Send Ir data→ p.354 <Protect ON/OFF> Copy to microSD→p.342 Mail not displayed due to the 2in1 setting/Secret ……“Moving/Copying SMS from the Mail UIM operation...
Page 174: Address (List/Detail)
Using Mail History When 2in1 is in A mode or B mode, up to 30 <Sent address/Received address> messages sent/received with the used address are displayed. In B mode, the Sent address list When you send or receive mail, the mail addresses screen cannot be displayed.
Page 175 Prefer attachment……Select Image/i-motion/ Setting Mail Functions Melody/PDF/ToruCa/Tool data (Phonebook, <Mail Setting> Schedule, Bookmark)/Other as the type of attached file to receive when you receive the mail. o “Mail Setting” Read out setting Select voice……Set the type of voice used to read out mail.
Page 176 Setting items to check for center inquiries <Receive option setting> <Set check new messages> This setting applies to i-mode mail only. SMS and Set items to check using “Check new messages” for MessageR/F are received automatically “Mail” (i-mode mail), “MessageR” and “MessageF”. regardless of this setting.
Page 177: When You Receive A Message
Guide to the MessageR/F screen Emotion/Keyword screen (p.174) Delete keyword, Delete all keyword Changing or deleting the keywords also deletes 2 -2 the keyword icons displayed on the mail list screen, etc. List screen (2 lines) Detail screen When You Receive a Message ①...
Page 178: Early Warning "Area Mail
Displaying Messages in <Sort> <Filter> Message Box <MessageR/F> The sort and filter functions can be used together. For example, to display unread messages in chronological order, select “Chronological ↓ ” in When MessageR/F arrives from the i-mode center, the sort menu, then select “Unread” in the filter “...
Page 179: When You Receive Early Warning "Area Mail
● When you receive Area Mail other Area Mail cannot be received in the following cases: • During i-mode than Earthquake Early Warning • During PushTalk When you receive Area Mail, the “Receive Area Mail” • During data communication or the “Notice” screen appears, then the Area Mail •...
Page 180: Sending/Receiving Chat Mail
Exchanging chat mail Sending/Receiving Chat Mail When you receive a reply to the mail you sent, it <Send/Receive chat mail> appears in the latest message area, and the message displayed until then moves to the You can exchange i-mode mail like you are chatting message history area.
Page 181 ● Adding broadcast mail recipients to Message history area chat members Older messages are displayed under newer ones. When the message is so long that the entire When a received chat mail was sent to multiple message cannot be displayed, an icon such as recipients (broadcast mail), the recipients can be ”...
Page 182 When you receive chat mail in standby Chat member screen (p.179) <Receive chat mail> Edit……Edit the mail address of a chat member other If you receive chat mail while chat mail is not active, than yourself. “ ” appears on the standby screen. Select the icon Refer address……Enter the chat member’s mail address to activate chat mail.
Page 183: Chat Group
If the mail address of the member to add is “phone number@docomo.ne.jp”, enter the phone number only. Up to 4 double-byte or 8 single-byte characters from the beginning of the name stored in the phonebook will be the member name.
Page 184: Composing And Sending Sms
The destination is designated by the phone number. This service allows you to exchange text messages with subscribers to overseas operators other than DOCOMO. For information on countries and overseas operators, refer to the NTT DOCOMO website. o “Compose SMS” New SMS Function menu p.183...
Page 185 → p.146 Preview……Check the SMS recipient and content before ■ If the recipient uses an overseas operator sending it. other than DOCOMO Save →p.154 Enter + (0 (1 second or longer)), country code, and the other party’s mobile phone SMS report req.
Page 186: When You Receive Sms
SMS (Phone To, AV Phone To, and Mail To * There is normally no need to change this setting. function). → p.198 Set whether to use the DOCOMO’s SMS center or If concatenated SMS arrives, original SMSs another SMS center.
Page 187 i-mode/i-motion/i-Channel/ i-concier i-mode..........................186 ■ Viewing sites Viewing a Site ..................i-mode menu/site Viewing and Using Sites ....................189 Quick Search Searching by Keyword ................My Menu Registering My Menu Entries................Change i-mode Password Changing i-mode Password ............Viewing Websites................. Internet connection Bookmark Saving Websites for Quick Access ..............
Page 188: I-Mode
■ To view an English i-mode site i-mode Scroll down to the bottom of the iMenu screen to select “English” i-mode is an online service that gives you access to a wide range of handy information via i-mode menu sites (programs) or i-mode compatible websites from your i-mode handset, and lets you easily exchange mail.
Page 189 ● “みんなNらんど” (Only in Japanese) Site screen (p.186) Download and save i-αppli, dictionary, Deco-mail →p.193 template from the site “みんなNらんど” of iMenu that Add bookmark can be used for various purposes on your FOMA Bookmark →p.193 terminal. Add screen memo→p.195 To restore the pre-installed i-αppli, PDF data, Deco- mail pictogram, etc.
Page 190 FOMA terminal URL. Press d (Select) again to hide the cursor. at the time of purchase. DOCOMO CA certificate: The certificate required Certificate……Display the content of the SSL to connect to the FirstPass center is stored in a certificate when the page is compatible with SSL.
Page 191: Viewing And Using Sites
Reconnecting to previously-visited Scroll function sites <URL History> If text or list on a page does not fit in the screen, scroll up or down to view the rest. Up to 30 previously-visited sites are recorded in “URL : Scroll down History”.
Page 192 Jumping to the previous/next page Using multi window You can jump forward or back to a page stored in the Open up to 5 websites (up to 6 websites including cache. Up to 30 pages in a window (up to 100 in all i-Channel) at once.
Page 193: Phonebook
Adding a phone number or mail Searching by Keyword address to the phonebook <Quick Search> <Add to phonebook> Add a phone number or mail address displayed on a Open a search window in each function, and search site page or screen memo to the phonebook. for a keyword via i-mode or search engine such as Google to obtain information quickly.
Page 194: Changing I-Mode Password
If you have forgotten your i-mode password, please bring official documents that verify your identity, URL list such as a driver’s license, to a docomo Shop Function menu p.192 Service Counter. “<NEW>” Enter a URL “OK”...
Page 195: Saving Websites For Quick Access
Select a bookmark Saving Websites for Quick Access <Bookmark> Bookmark folder list screen (p.193) If you frequently access the same sites, mark them with bookmarks. You cannot rename or delete the default Bookmark You can change the titles of bookmarks and folder.
Page 196: Connecting To Multiple Pages Continuously
Select a group Select the Copy URL……Copy a bookmarked URL. Use b to move the cursor to the beginning of text destination to copy d (Start) Use b to highlight up to the end of text to copy d (End) Copied URL can be pasted into the text entry (edit) screen.→p.403 No.
Page 197: Saving Site Content
Saving Site Content Screen memo data at the save time may differ <Screen memo> from the latest data. Save previously displayed information such as transfer guide as screen memos to the FOMA Screen memo list screen (p.195) terminal. Up to 100 screen memos can be saved. The Edit title number of screen memos that can be stored varies Protect...
Page 198: Downloading Fee-Based Content
Store/ Downloading Fee-Based Type Maximum size Register Content ToruCa 100K bytes Schedule data 2,500 1M bytes ® i-schedule Content (images, melodies, Chaku-Uta-Full , etc.) that can be downloaded from sites may be fee-based. Key illumination 3,948 bytes When you attempt to download fee-based content, *1 : GIF animation, Flash movie, GIF/JPEG image.
Page 199 ● Downloading remaining data of partially downloaded PDF data When 2in1 is in Dual mode or B mode and “Standby display” is set to other than “Same as If you saved a partially downloaded PDF data, Number A”, the saved image does not appear as download the remaining pages.
Page 200: Uploading Images/Movies
Uploading Images/Movies If you attempt to download a PDF data larger than 500K bytes, a message appears asking whether Upload images or videos stored in the FOMA terminal to download the data. or microSD card to the Internet website that supports You cannot download a PDF data whose size is file upload.
Page 201: Setting I-Mode
Set i-mode arrival act……Set whether to give Setting i-mode priority to PushTalk or i-mode when a PushTalk call arrives during i-mode. p “i-mode settings” Open tab setting……Set whether to open a new window on top or in the background under the current window.
Page 202: Using Ssl Certificates
Setting whether to use phone Changing from i-mode to another ISP information for Flash movies connection <Host selection> <Use phone information> * There is normally no need to change this setting. Set whether to use phone information when a Flash movie is played.
Page 203: Setting Firstpass
Setting FirstPass The following functions are not available while connecting to the FirstPass center: User certificates prove that the user is a proper • Send/Receive i-mode mail (SMS can be sent/ FOMA service subscriber. Downloaded user received) certificates are saved to the FOMA card (UIM) and •...
Page 204: Changing The Certificate Host
Download i-motion cover of this manual. from i-motion sites to the FOMA terminal. You can set • DOCOMO bears no obligation or responsibility for i-motion as a ring tone. Chaku-motion → p.96 sites and information provided by FirstPass compatible sites.
Page 205: Downloading I-Motion From Sites
Type Download complete screen Description Playback (p.203) Type type Streaming Played i-motion is downloaded Add screen memo→p.195 type during and played Certificate……Display the content of the SSL certificate (Cannot be download simultaneously. As the when the page is compatible with SSL. saved) file is discarded after (Up to 10M...
Page 206: Setting Whether To Play I-Motion Automatically
There are two types of channels that you can enjoy i-mode settings screen (p.199) with i-channel service: “Basic Channel” distributed by “i-motion auto-replay” Select DOCOMO and “Optional Channel” by information any item: service providers (IP). Packet communications charges do not apply to automatically update basic ON……Automatically play the i-motion after...
Page 207: Viewing Sites From The Channel List
Setting i-Channel Tickers do not appear if the FOMA card (UIM) is <i-Channel setting> not inserted, when the Public mode (Driving mode) is active, or when in Power saver mode. Set whether to display i-Channel information on the standby screen/Indicator display. Also set the scroll Viewing Sites from the speed and ticker color.
Page 208: I-Concier
If the file cannot be saved due to DOCOMO and distributed by information service insufficient memory, the download screen providers (IP). Packet communications charges do appears.
Page 209: Receiving Information
● Guide to the i-concier screen Receiving Information When the FOMA terminal is in the FOMA service area, information is automatically received. When you receive information, “ ” appears at the top of the screen. Up to 50 pieces of information can be saved. If the maximum number of pieces is exceeded, older pieces are overwritten.
Page 210: Setting I-Concier
Setting the i-concier ring tone When Original lock is set on “i-concier” under <Select ring tone> “Data disp. edit del.” and information is received, Set the ring tone, illumination and vibrator for the popup message “Receiving new information” information reception. appears on the standby screen.
Page 211 Setting date and time to store (update/ Setting Profile <Profile settings> restore) data at Data Security Center Store your personal information such as name <Auto store/update settings> (nickname), gender, birthday and address area. Set interval to automatically save Phonebook, ToruCa Information can be received based on the stored and Schedule to the Data Security Center, or set information.
Page 213 Full Browser/PC Movie Full Browser Displaying Website Designed for PC ............Uploading Images or Movies ..................216 Playing Flash Movies ...................... 216 Setting Full Browser................Full Browser settings Cookie..........................217 Referer ..........................218 PC Movie ........................218 Downloading PC Movies....................219 Playing PC Movies from Data Box ..................
Page 214: Displaying Website Designed For Pc
Displaying a website Displaying Website Designed for PC <Full Browser> p “Full Browser” Select any item: The Full Browser function now makes it even easier Home……Display a website registered as the home to view websites intended for computers. Some URL. websites incompatible with i-mode can be displayed correctly.
Page 215 ● Guide to the Full Browser screen ● Layout 2 display modes are available for the Full Browser screen: Original layout and Mobile layout. ① XX XX XXXXXXXX XXXXXXXX XXXXX XXXXXX ② XXXXXX XXXXXX ●XXXX ●XXXX ●XXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX...
Page 216 ● Operations in Drag mode ● Displaying a framed page Activating the drag mode while “Pointer display” On the standard type screen, you can view framed (p.217) is set to “ON” allows you to operate the drag- websites designed for PC by frame. mode-compatible content.
Page 217 Site settings Full Browser screen (p.213) Replay……Play Flash or the GIF animation on the bookmark……Mark the website with bookmark. Up displayed screen from the beginning. to 100 entries can be stored. Pause……Pause Flash. Bookmark……Open the “Bookmark folder list” screen. Play……Play Flash. You can also play from the Save image……Save the image on the displayed page.
Page 218: Uploading Images Or Movies
● Selecting a desired portion in the Playing Flash Movies entire page You can view a desired portion in the entire website in You can play Flash movies on a Flash-compatible Original layout mode. website. Full Browser screen (p.213) Using phone information in Flash movies → p.217 u (FUNC) “Zoom”...
Page 219: Setting Full Browser
Please note When “OFF” is set, “ ” appears instead of images. that DOCOMO is not responsible for any reveal of your Cookie settings→p.217 information to third parties resulting from Cookie sending.
Page 220: Referer
Long time playback is transfers information such as page from which you possible. access the site. available. Please note that DOCOMO is not responsible for any On-demand: reveal of your information to third parties resulting from Deliver PC Referer sending.
Page 221: Downloading Pc Movies
The streaming type server only supports Microsoft Windows Media Services 9 or 4.1. You cannot play Some PC movie files have playback restrictions. streaming type PC movies delivered from other The PC movie restricted on playback period servers. cannot be played before or after the period. If the Some websites check the operating environment battery pack is removed from the FOMA terminal (browser type, OS, etc.).
Page 222: Playing Pc Movies From Data Box
Playing PC Movies from Data Play movies designed for PC that are accessible through websites or PC movies stored in a microSD card using a PC. i “Data box” “PC Movie” “SD PC Movie” “Guide to PC Movie list” → p.220 PC Movie list Function menu p.220 Select a PC movie...
Page 223 Camera Before Using Camera ..................... 222 Photo mode Capturing Still Images................... Capturing Panoramic Views.............. Panorama cap. mode Recording Movies ..................Movie mode Capturing Important Scenes..............Chance capture Voice mode Using Voice Mode ..................Changing the Shooting Settings ..................235 Bar code reader Using the Bar Code Reader..............
Page 224: Before Using Camera
● Close-up Before Using Camera To take a close-up image, select “Close-up” in “AF change” (p.227). The camera is focused on a Use the built-in camera to capture photos (still subject approx. 10 cm away from the rear camera. images) and movies. ●...
Page 225 Do not leave the camera under direct sunlight for a ■When shooting is interrupted long period of time. Do not point at the sun or a Shooting is interrupted when you receive a voice/ videophone/PushTalk call or 64K data powerful lamp directly. Doing so could lead to the communication, or alarm notification (Booking discoloration of photographed images or cause the program, Timer recording, Alarm, Schedule or To...
Page 226 ④ Remaining storage count/Memory info Guide to the shooting screen ……The number of images that can be The shooting screens display the icons of the camera saved settings. Each icon indicates as follows: • White: 11 or more Photo mode Movie mode •...
Page 227 ● Icons and settings of the shooting Selecting the shooting menu menu If you display the shooting menu, you can configure The selectable items vary depending on the various settings by simply selecting icons. camera mode. Description of displayed menu Some menus are unavailable depending on the items and highlighted icons Shooting screen...
Page 228: Capturing Still Images
④ Photo mode Capturing Still Images Photo mode <Photo mode> Movie mode Auto……Automatic shooting mode When Camera is activated, Auto focus is set to Portrait……Suitable for shooting portraits “ON”. Smile face……Suitable for shooting smiles “Auto focus shooting” → p.227 Scenery……Suitable for shooting scenery On the standby screen d (including night view) Select “...
Page 229: Auto Focus
● Auto focus shooting ■Fixed focus shooting (Auto focus: OFF) Shoot without using the Auto focus function. AF function is available to capture a still image using ■Auto focus lock shooting (Auto focus: ON) the rear camera. You can use two modes: “Single If you want to focus on other than the center of the auto focus”...
Page 230 Attach location Photo mode screen (p.226)/ Smile face mode screen (p.229)/ From position loc.……Add the current location information. Continuous mode screen (p.230)/ Panorama mode screen (p.232) From loc. history From phonebook ……Switch between the Front camera⇔Rear camera From my profile front and rear cameras.
Page 231 Capturing smiles ……“Shooting framed images” →p.231 Change frame ⇔ ……Select the Mirror display Normal display The camera automatically detects smiles and checking screen display. releases the shutter. Select to save You can set the smile level where the shutter is released.
Page 232 ■ To check details Shooting continuously <Continuous mode> Move the check frame to an image using Shoot up to 20 still images continuously using the (Detail) rear camera. There are two types of continuous You can change images to shooting: A-continuous mode (Auto) and check using v.
Page 233 Continuous mode checking Continuous mode detail screen (p.230) checking screen (p.230) Store selection……Save still images marked with Save……Save images to the folder specified in “Select to save”. Store all……Save all still images as normal or mirror images. Mirror save……Invert the left and right of the displayed image and save the image to the folder specified in Store all&anime……Save all still images you shot as...
Page 234: Compose Message
Composing i-mode mail or Deco-mail using a shot still image Blog addresses set in “Blog/Mail member” are automatically entered when composing mail with You can attach a shot still image to i-mode mail, insert “Blog cont.” → p.155 in Deco-mail text or create mail for a blog. Photo mode checking screen Capturing Panoramic Views (p.226)
Page 235: Recording Movies
d (Stop) d (Record) Frame the shot Recording starts. ■ To shoot again You can zoom in/out during t “YES” shooting. ■ If the file size reaches the limit specified in File size Movie mode “OK” d(Stop) Panorama shooting ■ To play the movie you checking Function menu p.228 shot...
Page 236 White balance……Set the same setting as the Movie mode checking screen shooting menu (p.226). (p.233) Effect……Select Full Color/Sepia/Monochrome. Play Flicker……Reduce the flicker on the shooting screen. Select Auto/Mode 1 (50Hz)/Mode 2 (60Hz). Save……Save the recorded movie to a folder specified in “Select to save”.
Page 237 Changing the Shooting Capturing Important Scenes Settings <Chance capture> Even if the available shooting time is reached when Configure the settings such as zoom, Auto timer or shooting a movie, you can continue shooting. shake correction. If shooting is continued past the scheduled duration, only the last part of the movie will be Using zoom saved.
Page 238 Image size Photo mode Movie mode Setting the Digital Shake Correction Front camera (2 steps) When shooting with the rear camera, you can use the QVGA V. Approx. 1.5x – Digital Shake Correction. QVGA – Approx. 2.0x This function is available in Photo mode, Panorama QCIF Approx.
Page 239: Scanning Codes
* When the FOMA terminal scans the QR code on the right above, the code is displayed as “ 株式会社NTT The FOMA terminal cannot scan a code other ドコモ (NTT DOCOMO, INC.)”. than a JAN code, QR code and CODE128. Some CODE128...
Page 240 Item Description Reading data detail screen Mail “Mail To function”→p.198 (p.238) Address “Web To function” → p.198 Store Image Save the image→p.196 Display list……Display the Reading data list screen. If the displayed data is not stored, a message appears Scanning screen (p.237) asking whether to delete the data.
Page 241 Maximum number of characters Scanning Text Item to scan <Text reader> that can be scanned 256 in single-byte alphabetic Use the rear camera to scan printed text then add the characters, numbers and symbols scanned text data as a phonebook entry or Mail address 256 in single-byte alphabetic bookmark, or use the data to compose mail.
Page 242: Scanning Text
■ To select a character Scanning text and edit Use v to highlight a <Example: To scan text in Card read mode> character to edit Press the i “LifeKit” “Text reader” candidate No. Use w to change between upper and lower Candidates case if available.
Page 243 Using text information Search phonebook……Search phonebook using the scanned data. You cannot search the phonebook on the You can use the following scanned data: scanning screen, in Card read mode or Compose message mode. Item Description Add to memo……Add the scanned data to Text memo. Add to Add the name, phone number, mail You cannot store the scanned data on the Reading screen...
Page 245 1Seg 1Seg ..........................244 Channel setting Setting Channels ..................Watching 1Seg Programs ................Activate 1Seg Using G-GUIDE EPG Remote Control ....... G-GUIDE EPG Remote Control Using Data Broadcasting ................Data broadcast TV link Using TV Link ...................... Record 1Seg Recording Scenes while Watching .............. Booking program list/Timer recording list Activating/Recording 1Seg ........
Page 246 ● Display when using 1Seg for the first 1Seg time The disclaimer screen appears. 1Seg is a mobile digital terrestrial audio/video and Press d (OK), then select “YES”. data broadcasting service. Use i-mode to get detailed If “NO” is selected, the screen will not appear from program information, join a quiz show, enjoy TV the next time.
Page 247: Select Area
Perform “Auto-channel setting” in digital terrestrial ■ Important broadcast range with strong signals. Please be aware that DOCOMO bears no A message may appear indicating that remote obligation or responsibility in the event that control Nos. are duplicated in “Auto-channel stored data is altered or lost.
Page 248 Selecting channel lists Watching 1Seg Programs <Activate 1Seg> Select a channel list to set channels. i “1Seg” “Channel list” i “1Seg” “Activate 1Seg” The “1Seg” screen appears with last-viewed channel. • To end watching, press y or t for 1 second or longer, then select “YES”.
Page 249 ⑤ 1Seg effect (sound effects) → p.253 Operations while watching 1Seg : Sound effects OFF : CS5.1ch (only available when Some key operations are not available in data earphones are connected) broadcast mode. : Auto Action Forward channel selection 0 to 9 : Each genre One-touch channel selection Press keys corresponding to...
Page 250 Channel 1Seg screen (p.246) Channel info……Display information on the 1Seg effect→p.253 selected channel list. Program info……Display information or start/end time on Channel list →p.246 the viewed program. Channel setting→p.245 ……Select Compose message/ Compose message Select service……Select service to view when Suggested message.
Page 251: Using Data Broadcasting
Performing time-shift playback Using G-GUIDE EPG Remote Control Even if 1Seg program is paused, time shifting <G-GUIDE EPG Remote Control> playback is available. Time-shifting playback is available when you pause The G-GUIDE EPG Remote Control allows you to 1Seg program or receive a voice call/videophone activate 1Seg from the program guide or set a timer call/PushTalk while watching 1Seg.
Page 252: Using Tv Link
Opening sites or memos from TV link If “YES (confirm once)” is selected on the data i “1Seg” “TV link” Select broadcast confirmation screen, data broadcast information automatically updates and packet TV link communications charges may apply. If i-mode access ToruCa may be acquired automatically when confirmation appears, select receiving data broadcast or data broadcast site.
Page 253: Recording Video
Recording Scenes while During recording, alarm sounds for about 2 Watching <Record 1Seg> seconds, 1 minute before recording scheduled time. Operation is performed based on “Priority” set at the time of timer recording registration as Save current program as a video or picture. follows: Recording may not be performed due to copyright •...
Page 254 ……Set operation to be performed Priority Activating/Recording 1Seg when the start date and time arrives while using <Booking program list/Timer recording list> 1Seg/Music group (1Seg, Data Box (1Seg), Music, Music&Video Channel). Perform Booking program/Timer recording. Notify the Recording……Interrupt/End current operation start of the program or recording by alarm at the to start recording.
Page 255 Configuring 1Seg Settings <Timer recording> <User settings> Timer recording cannot be booked if the recording time overlaps that of an existing entry. You cannot record any program if the FOMA i “1Seg” “User settings” terminal is in the following status about 1 minute before start date and time: Select any item: •...
Page 256 Time Shift setup……Set whether to pause 1Seg Notifying New Message watching automatically (starting time-shift playback), Arrival while Watching e.g. when a call arrives. <Quick Info setting> Auto ON……Perform time-shift playback. “Performing time-shift playback”→ p.249 Ticker shows new message arrival while watching/ Auto OFF……Perform normal playback.
Page 257 In the above case, delete all WMA data in the FOMA terminal, then transfer WMA files from your PC. Note that DOCOMO accepts no liability whatsoever for handling of copy control CD (CCCD) and music data that cannot be saved as a WMA file.
Page 258: Music&Video Channel
Music&Video Channel Setting Programs Music&Video Channel is a service that automatically Choose a program title you want to listen to once. performs overnight downloads of programs of up to After that, subsequent programs are downloaded approximately one hour in length (approx. 30 minutes automatically overnight, hassle-free.
Page 259 ● Guide to the icons on the After setting the program Music&Video Channel screen “ ” appears on the standby screen 12 hours before Icon Description download starts. Normal program The program is automatically downloaded at night, and the desktop icon “ ”...
Page 260: Playing Programs
Music&Video Channel screen Chapter list screen (p.258) (p.256) Chapter info……Display the chapter title and playback time. Chapter list……Display the list of title, artist and playback time of each chapter. Select a chapter to play. “Chapter Chapter image……Display images stored in the chapter. list”→p.258 Connect to URL……Access the site using the Web To...
Page 261 Program list screen (p.259) The playback time synchronizes with the automatically adjusted time, so it is not changed Chapter list……Display the list of title, artist and playback even if you manually change the date and time on time of each chapter. Select a chapter to play. “Chapter the FOMA terminal.
Page 262: Downloading And Saving Chaku-Uta-Full ® From A Site
Downloading and Saving ® You can save Chaku-Uta-Full as “Screen memo” ® Chaku-Uta-Full from a Site using “Add screen memo” on the function menu of the “Download complete” screen (p.260), then ® start playback from the screen memo.→ p.195 You can store up to 100 Chaku-Uta-Full on the FOMA terminal (the number of items you can ●...
Page 263: Playing Music
When you perform the operation overseas, the time limit may expire before or after the displayed period. Some tracks have playback restrictions. “ ” Icons on the “Music list” screen indicate playback appears at the beginning of the title for the track restriction status.→...
Page 264 : Playable only when the FOMA card (UIM) File property……Display the music file name, the save being used was also used to save the track date and time and whether the track can be moved to a : Playable only when the model and FOMA card microSD card.
Page 265: Using The Playlist
Creating a Playlist When the battery is low, Music Player is not activated even if you press @ (MUSIC) for 1 Playlist list screen (p.263)/Music second or longer. When the battery becomes low list screen (p.261) u (FUNC) and the track is temporarily paused, playback is “Create playlist”...
Page 266: Using Sd-Audio
Playlist list screen (p.263) <Edit playlist> Releasing tracks from the playlist does not delete Create playlist→p.263 the original data. Update all tracks……Add tracks in a microSD card to a list of all tracks. Using SD-Audio Edit playlist name Copy to playlist……Create a copy of the playlist in the playlist list.
Page 267: Saving Wma Data To A Microsd Card
Activate “SD-Jukebox” on the PC Connect the FOMA terminal to a and convert music data such as PC via the FOMA USB Cable with music CD data to AAC format Charge Function 01/02 For how to use “SD-Jukebox”, refer to the “SD- “...
Page 268: Using The Music Player
Guide to the music player screen Using the Music Player <Music Player> Movies/i-motion, PC Movies, i-motion Music&Video Channel programs can be played in wide display. ® Use the music player to play Chaku-Uta-Full , PC Function menu of the Music player screen→ p.268 movie, i-motion, Music&Video Channel program and Normal tracks stored in a microSD card.
Page 269 ⑥ Track Operations on the music player Track: Track No. being played/Total number of screen tracks in the folder Music&Video Channel: Chapter No. being played/ The following operations may not be available Total number of chapters depending on the type or activation method of a i-motion/PC movie: File No.
Page 270 Music Player screen (p.266) Some playback operations are restricted on the Some functions may not be available depending on Music&Video Channel program (Mainly use of the type of track, Music&Video Channel program, i-motion or PC movie being played. Rewind and Fast forward are not available depending on the data.
Page 271 Using other functions during music Set repeat play……Set whether to play files continuously in the folder. playback <Switch to BGM> Play menu You can play a track or Music&Video Channel Fast……Play fast. Press o (Play) to return to program and use other functions simultaneously. normal playback.
Page 273 i-αppli/i-Widget i-αppli ..........................272 Downloading i-αppli from Sites ..................272 Starting i-αppli ........................ 273 Pre-installed i-αppli ......................277 Starting i-αppli Automatically ..................284 Using i-αppli Call......................284 i-αppli call DL set Setting i-αppli Call.................. i-αppli To function Starting i-αppli from Sites or Mail ............Set i-αppli stand-by Setting the i-αppli Standby Screen .............
Page 274: I-Αppli
● Downloading mail-linked i-αppli i-αppli When you download mail-linked i-αppli, an i-αppli mail folder is automatically created in the Inbox or i-αppli are software applications that run on i-mode Outbox folder. The name of the downloaded mail- compatible handsets. You can automatically receive linked i-αppli will be the folder name and cannot be updated stock prices, weather information, etc., and changed.
Page 275: Starting I-Αppli
■i-αppli status displayed on the Software list Viewing i-αppli information during screen download <Disp. Software info> Icon Description You can check i-αppli information when downloading i-αppli DX the i-αppli. Mail-linked i-αppli i “Settings/Service” “i-αppli “Auto start time” already set settings” “Disp. Software info” “Set i-αppli stand-by”...
Page 276 ● Motion tracking Images or entered data used with i-αppli may be Your FOMA terminal supports “Motion Tracking” that automatically sent to the server via the Internet. enables you to operate i-αppli (by tilting/shaking the α *: Images used with i- ppli refer to those captured FOMA terminal) using the recognition technology with the camera activated from a camera-linked...
Page 277 Program guide……Set whether to use the i-αppli as program guide i-αppli activated by pressing p <Software setting (Program guide)> (EPG) on the 1Seg screen (p.246). You can also set When set to “NO”, a message appears asking downloaded i-αppli as program guide i-αppli. “G ガイ whether to release.
Page 278: Adjust Volume
Adjusting i-αppli volume Checking the security error history <i-αppli vol.> Adjust i-αppli volume. When i-αppli or i-αppli DX attempts to perform a disallowed function, a security error occurs, and the i “Settings/Service” “i-αppli details are recorded in the security error history. settings”...
Page 279: Pre-Installed I-Αppli
アバター☆ボウリング (Avatar Bowling) Pre-installed i-αppli Enjoy 3D bowling with X-FORGE game engine. Select “ノーマルモード” (Normal mode) or “ミッショ 22 i-αppli are stored at the time of purchase. ンモード ” (Mission mode). Note that looking at the display for extended You can also load your original avatar created with periods of time may cause eye strain.
Page 280 フォト文字クリエイター (Photo Text 日英版しゃべって翻訳 for N Creator) (J-E Shabette Honyaku for N) Edit images photographed or This i-αppli provides a system that translates spoken stored in Data box with a single utterances used mainly for travel in a source press of a key by pasting language to those in a target language (Japanese, messages or stamps.
Page 281 日中版しゃべって翻訳 for N Gガイド番組表リモコン (G-GUIDE EPG (J-C Shabette Honyaku for N) Remote Control) This i-αppli provides a system that translates spoken The G-GUIDE EPG Remote Control is an i-αppli that utterances used mainly for travel in a source combines digital terrestrial and analog and BS digital language to those in a target language (Japanese, TV program listings with audiovisual device remote Chinese).
Page 282 * If timer recording is already set for the time, a message appears. Application/Screening* Packet communications charges will apply. DOCOMO is not responsible for any FOMA Set card information terminal data damage the subscriber may incur. iD 設定アプリ (iD i-αppli)
Page 283 ■ Notes on use The actual screen may look different. DOCOMO is not responsible for any IC card data damage the subscriber may incur. The actual data rate may differ depending on the communications environment (weather, signal ｉアプリバンキング (i-αppli Banking) quality and network congestion) even in the same location and time.
Page 284 * “Mobile Suica” is a registered trademark of East Japan 地図アプリ (Map Application) Railway Company. See p.302 for “ 地図アプリ ” (Map Application). マクドナルドトクするアプリ This i-αppli supports Motion Tracking. (McDonald’s Coupon Appli) 楽オク☆アプリ (Rakuoku Appli) Check recommendations such as new menus. Download “ かざ “...
Page 285 This i-αppli attempts to ensure that the content is complete, but does not guarantee the accuracy. DOCOMO and content providers bear no responsibility for any damages that may result from the information.
Page 286: Starting I-Αppli Automatically
Checking whether i-αppli activated Starting i-αppli Automatically automatically Set the i-αppli to activate automatically at the Check whether the i-αppli was automatically activated specified date and time or interval. at the specified time. You can also check for i-αppli that failed to activate from the IC card.
Page 287: Setting I-Αppli Call
● Answering i-αppli call being called Depending on the i-αppli call, the i-αppli may start i-αppli call logs screen Select a without a message asking whether to answer. call in progress “Accept” Packet communications charges may apply when answering i-αppli call. i-αppli call may arrive from content providers.
Page 288: Setting The I-Αppli Standby Screen
Communication i-αppli set as standby screens you forward mail using the infrared data exchange may not work properly depending on the signal function, DOCOMO keitai datalink (p.437), etc. quality, etc. If “Stand-by net” under “Software setting” is set to Activating i-αppli from another “OFF”, you may miss timely information.
Page 289: Managing I-Αppli
Activating the i-αppli standby screen End stand-by info screen (p.287) Activate i-αppli set as the i-αppli standby screen. On the i-αppli standby screen Copy info……Copy the End stand-by info. Delete info……Delete the End stand-by info. The i-αppli is activated, and “ ”...
Page 290: I-Widget
i-Widget i-αppli stored in a microSD card may not be available on another FOMA terminal. i-Widget is a useful function that allows you to quickly When i-αppli in a microSD card is moved to the access often-used contents (Widget appli) such as FOMA terminal (Phone), the i-αppli data is also Calculator, Clock and stock prices simply by pressing moved to the FOMA terminal (Phone).
Page 291: Using I-Widget
■Widget appli status displayed on the i-Widget Using i-Widget screen Icon Description Normal Widget appli Starting Widget appli Widget appli DX Start Widget appli from the i-Widget screen, Widget Widget appli downloaded from an SSL appli list screen, or Software list screen. To open the page i-Widget screen, press f on the standby screen.
Page 292: Downloading Widget Applications
● Setting sound effect volume for i-Widget start <i-Widget sound effect> If no key is pressed for approximately 3 minutes on the i-Widget screen or Widget appli list screen, i “Settings/Service” “i-αppli the standby screen reappears. The standby settings” “i-Widget sound effect” screen does not reappear automatically when Widget appli is active.
Page 293 Osaifu-Keitai/ToruCa Osaifu-Keitai ........................292 iC Transfer Service ......................292 Starting Osaifu-Keitai i-αppli ................... 293 Locking IC Card Function ..............IC card lock setting Setting the Illumination and Vibrator for IC Card ........IC card notice set Check IC owner Checking Owner Information of IC Card ..........ToruCa ToruCa .........................
Page 294 Osaifu-Keitai i-αppli . iC Transfer You can also use the i-mode network to add e-money Service is available at a docomo Shop or service credit, check balances and usage history. Enough counter. security is provided so the Osaifu-Keitai can be For details on iC Transfer Service, refer to “Mobile...
Page 295 Using Osaifu-Keitai Starting Osaifu-Keitai i-αppli By holding the e mark printed on the FOMA terminal over the reader/writer unit, you can make Start the Osaifu-Keitai i-αppli from the Software list payments with e-money or utilize as tickets. This screen. Add e-money credit, make payments, check function can be used without starting i-αppli.
Page 296 Releasing IC card lock using face Locking IC Card Function authentication <IC card lock setting> If an image is registered in “Face authentication” and You can lock the IC card function to prevent others “IC card lock” is selected under “Function to reset”, from using the IC card functions without your consent.
Page 297 ToruCa usage flow Checking Owner Information of IC Card <Check IC owner> Wave the e mark of your Osaifu-Keitai over a Check if the installed IC card links to the FOMA card reader/writer to get (UIM) on the identical Osaifu-Keitai. If replacing with ToruCa other FOMA card (UIM), delete (or initialize) the Osaifu-Keitai i-αppli and use the iC card function...
Page 298: Display Screen
● Guide to the ToruCa list screen/ToruCa display screen ToruCa may not be updated or redistributed as mail attachments, via infrared communications, etc. depending on the content provider’s settings. Receiving ToruCa <Receive ToruCa> Acquire ToruCa from the reader/writer unit. You can store up to 200 ToruCa* to the ToruCa folder (The number of ToruCa that can be stored ToruCa list may be less depending on the file size).
Page 299 *2*4 ……Compose an i-mode mail Compose message ToruCa folder list screen with ToruCa attached. (p.296) →p.355 iC transmission folder……Enter a folder name to add a folder. Up to Send Ir data →p.354 20 folders can be added on the FOMA terminal. →p.342 Copy to microSD ……Edit the folder name of the added...
Page 300 You may not be able to copy ToruCa, attach ToruCa to mail, send ToruCa via iC communications/infrared communications, copy ToruCa to a microSD card or update ToruCa. Setting ToruCa <ToruCa settings> i “Osaifu-Keitai” “Setting” “ToruCa settings” Select any item: Receive from IC card……Set whether to receive (Yes) ToruCa or not (No) when holding the e mark to a reader/writer.
Page 301 Map/GPS Function Using Map/GPS Function ....................300 Reading Map ......................Checking Your Location ................Position location Setting Position Location ................. Position settings Using Map/GPS Application ................... 302 Location request Providing Location Information on Request ..........Location notification Notifying Location Information ............Location history Displaying History of Checked Location Information .......
Page 302 The FOMA terminal cannot be used to navigate an FOMA terminal is out of service area (or abroad). aircraft, vehicle, person, etc. Under no circumstances shall DOCOMO be held liable for any loss or damage resulting from use of location information. Reading Map <Map>...
Page 303: Setting Position Location
Checking Your Location Pressing 1 for 1 second or longer on the <Position location> standby screen also obtains location information. In this case, the item set in “GPS button setting” Determine your current location and obtain location (p.301) is automatically selected. information.
Page 304: Using Map Application
• Start the transfer guidance simply This software provides the basic service and through voice input. additional service. Basic service: Service provided by DOCOMO free of charge Additional service: Pay service provided by ZENRIN DataCom The additional services other than traffic information...
Page 305 ■If 60 days elapse without membership 61st day Menu Description registration and later When activating this software for the first time on a 便利ツー • Display by painting colors on the Free 61st day or later, a message appears indicating that locations of cities or prefectures ル...
Page 306 ■Key operations on the easy access menu Action screen o (TOP) Show the TOP menu screen. Action p (縮小 (Zoom out)) Press and hold to zoom out. f (周辺検索 Check information on the focused area u (拡大 (Zoom in)) Press and hold to zoom in. (Local of the map shown and the surrounding Search))
Page 307 ● Screens and operations for Route 出発時刻指定 (Start time)……Set the start time to (car)/ Navigation (car) view check the route. 到着時刻指定 ■Route (car) view (Arrival time)……Set the arrival time to check the route. 終電を利用 (Last train)……Check the route with the last train of the day.
Page 308: Voice Input
■Key operations on the easy access menu Voice is recognized and the screen confirmation screen appears Action ■ When recognition is f (目的地周辺 Search information on nearby incorrect (Nearby) parking lots. “ 音声再入力 ” (Retry) g (結果 &設定 Display the route search result (Result &...
Page 309 ジ (Message)) To use a location request service, see the service p ( 縮小 Press and hold to zoom out. provider or the NTT DOCOMO website. (Zoom out)) u ( 拡大 Press and hold to zoom in. (Zoom in)) This function is available only for Number A, regardless of the mode in 2in1.
Page 310 <Example 2: Current time “2008/12/26 12:05”, Start time 10:00, End time 21:00> Even if “Reject numbers unset” is set, location information requests from callers not stored in the Period for location Repeat Term of validity request phonebook may be received depending on the 1 time 2008/12/26 12:05 to setting situation.
Page 311 • Even though the location request is interrupted after “YES” is selected, the rough positioning result is reported to the party. In this case, it is recorded in the location history but location information is not displayed. • See the NTT DOCOMO website for imadoco kantan search.
Page 312 The service charges may apply. →p.355 iC transmission To use the location notification function, see the Send Ir data →p.354 service provider’s or the NTT DOCOMO website. →p.356 iC trans. all Send all Ir data → p.354 This function notifies the location information by Number A, regardless of the mode in 2in1.
Page 313 Setting Positioning mode for Location microSD client folder screen notification (p.310) Add folder, Edit folder name, Delete folder……Select Map/GPS settings screen (p.301) and execute an item. “Notification menu” “Positioning mode” Select any item: microSD client list screen Standard mode……Give priority to positioning fast. (p.310)/microSD client detail Quality mode……Position slowly.
Page 314: Using Location Information
■Guide to the Location history detail screen Add to phonebook……Add location information to the Select an item phonebook. ① The date and time Attach to image……Select an image, then add location ② The function name information to the image. ③ The latitude (N) and longitude (E) of the Delete……Select Delete this/Delete selected/Delete all.
Page 315 Data Management Data Box ......................... 314 ■ Making full use of images My picture Displaying Stored Images ................Edit image Editing Still Images ..................■ Making full use of movies i-motion Playing Movies/i-motion ..................Edit i-motion Editing Movies ....................■ Making full use of videos Video player Playing Videos ....................
Page 316: Data Box
Folder Contents Data Box micro Picture Still images you shot, JPEG/GIF images copied from the FOMA terminal or copied from a PC to a In Data box, still images and movies shot with the microSD card are saved. camera or data downloaded from mail or websites are Pictograph Deco-mail pictograms copied stored.
Page 317 Folder Contents Folder Contents Secret Save movies/i-motion you want Machi-chara to prevent others from viewing. Inbox Machi-chara is pre-installed. You User created You can select this folder to save can select this folder to save folder movies/i-motion as to Inbox. Machi-chara downloaded from websites.
Page 318: Displaying Stored Images
Displaying Stored Images The following images cannot be displayed: <My picture> • Image larger than 2M bytes • An image whose width or height exceeds 2,592 Still images shot with the camera or downloaded from dots or total number of dots exceeds 2,592 × websites can be displayed in My picture of Data box.
Page 319 ■Image type icon ■Retrieval method icon Icon Description Icon Description No icon Pre-installed data JPEG image Data downloaded from sites, mail, GIF image ToruCa or retrieved from i-αppli GIF (IFM) frame, marker stamp Data shot with the camera SWF Flash movie Data obtained via infrared data exchange, iC communication, microSD card, Bar MP4 movie/i-motion...
Page 320 ■File format Folder File format Chara-den Folder File format − My picture PC Movie Inbox JPEG, GIF, SWF SD PC Movie WMA, WMV, ASF Camera 1Seg Decomail-picture Image JPEG Pictograph D JPEG, GIF Video MPEG2-TS Auto Deco-mail Manga&Book Pre-installed JPEG, SWF Inbox XMDF, TEXT Secret...
Page 321 ……In Full screen mode, portrait- Normal⇔Full screen Image list screen (p.316)/My oriented images appear in portrait display, and landscape- picture screen (p.316) oriented images in landscape display. In Normal mode, both portrait and landscape images appear in portrait The available functions vary depending on the display.
Page 322 <Set as display> <Sort> You can set images in the Inbox, Camera or user “By source” sorts in the following order. ①Downloaded images or images obtained via created folder as the following screens: • Stand-by display, Wake-up display i-αppli or ToruCa ②Still images shot with the camera •...
Page 323: Animation (Create)
Creating animations Blog contribution……Post an image smaller than <Original animation> 240 dots wide × 320 dots high or 320 dots wide × Create an animation made of up to 20 frames using 240 dots high as a Blog entry. Select any of the stored images.
Page 324: Animation (Play)
■ To change effects when switching images Playing an original animation o (Slide/Fade/Cube/RGB) “Slide”, “Fade”, “Cube” and “RGB” switch each Original animation list screen time you press o. (p.321) Select an original ■ To detect faces animation p (Face) The detected face is zoomed in. If there are two or more original animations, use v If there are multiple faces in the image, the faces...
Page 325: Adding Frames
When “Edit image” is selected in the function menu of the photo mode check screen, only “Frame”, When you edit an image then compose and send “Retouch”, “Refresh skin tone” and “Correct mail with the image attached or inserted, the backlight”...
Page 326: Playing Movies/I-Motion
Select a folder Guide to the movie list You can only use downloaded stamps of 240 dots screen → p.324 wide × 240 dots high or smaller. Stamps larger than the above size are handled as GIF images. ■ To search i-motion by i-mode ●...
Page 327 ■Preview Keep in secret ⇔Put out ……“Preventing Others from 6 movies are listed by title on the screen, and a Viewing Data”→p.127 preview image of the selected movie appears under →p.343 Copy to phone the titles. Preview images do not appear for sound-only Move to phone →p.344 i-motion (i-motion with no video, e.g.
Page 328 ● Playing movies in your preferred Editing Movies <Edit i-motion> order <Playlist> Select and store up to 25 movies or i-motion to play You can edit only movies with “ ”. multiple movies continuously. <Example: Movie list screen for the Inbox, Camera or There are 5 playlist folders.
Page 329 Press d (Stop) at the scene you want to stop trimming o (End) Some videos may not play correctly. You can play video sounds with commercially ■ When “500KB” is selected available Bluetooth devices. → p.393 Trimming stops automatically when the size of the trimmed movie reaches 500K bytes.
Page 330 ⑨ With or without subtitles Video playback screen appears for a video with subtitles. ⑩ Volume The volume level is displayed between 0 and 20. ⑪ Sound effect ON Appear regardless of the program/FOMA terminal settings. Operations during video playback Portrait display Action d (@)
Page 331 Using Chara-den characters Main/Sub setting……Set audio output. Main sound……Output only the main audio. Select various pre-installed actions to play Chara-den sound……Output only the sub audio. characters. Main + sub sound……Output the main and sub Chara-den player screen (p.329) audio. Control Chara-den characters Icon always show ……Set whether to always display the ■...
Page 332 <Example: To select “ 顔アップ ” (Face zoom in) Saving Chara-den Character in Parts action mode> as Image or Movie <Rec. Chara-den> (Parts) ■Rec. Chara-den screen ■ To have the character’s mouth move synchronizing your voice Some Chara-den characters can move the mouth synchronizing your voice as if it were talking.
Page 333 ● Recording still images ■ To view the recorded movie u (FUNC) “Check w/ playing” Chara-den player screen (p.329) ■ To record again u (FUNC) “Rec. Chara-den” d (Save) The recorded movie is saved to the Camera folder under i-motion. The image size (QCIF (176 ×...
Page 334: Viewing Machi-Chara
Picture list and Title list File size setting 500KB……Record up to 500K bytes. Image type icon, Retrieval method icon, Available 2MB……Record up to 2M bytes. operation icon → p.317 *1 : Available only in Photo mode. Image type icon Image type icon Retrieval method icon *2 : Available only in Movie mode.
Page 335: Playing Melodies
Guide to the melody list Playing Melodies <Melody> Melody type icon Play pre-installed melodies, sound effects or Retrieval method icon melodies downloaded from sites in the “Melody” Title folder under Data box. i “Data box” “Melody” Available operation icon Melody folder → p.315 ■Melody type icon Folder list Function menu p.348...
Page 336 Operations during melody playback ……Select Delete this/Delete selected/Delete all. Delete *1 : Available only on the melody list screen. Action *2 : Available only on the melody screen. *3 : Not available when 2in1 is in B mode. Play the previous *4 : Available only for melodies stored in a microSD card.
Page 337 Package list Managing Kisekae Tool <Kisekae Tool> Package type icon View the content of a Kisekae Tool package Title downloaded from a site. Available operation icon “ダイレクトメニュー ” (Direct menu) and “拡大メ Retrieval method icon ニュー ” (Enlarged menu) are stored at the time of purchase.
Page 338: Checking Key Illumination
Guide to the key illumination list Memory Info……Display the amount of the stored Kisekae Tool. Key illumination type icon Sort……Sort packages by specified criteria. Retrieval method icon Delete……Select Delete this/Delete selected/Delete all. Title Checking Key Illumination <Key illumination> ■Key illumination type icon Check the flashing pattern of pre-installed or Icon Description...
Page 339: Microsd Card
Do not put a label or sticker on a microSD card. Keep a backup copy of data stored in a microSD ■ To remove the card card. Please be aware that DOCOMO is not When you push the microSD card in and responsible for any damages the subscriber may release, the card pops up slightly.
Page 340: The Microsd Card
● Number of files that can be stored in Folder structure in a microSD Card the microSD card When you copy data from the FOMA terminal to a The number of files that can be stored in a microSD microSD card, folders are created as shown in card varies depending on the memory capacity of the Table 1 (p.339) and the data are saved to the microSD card.
Page 341 • Video in “microSD” under “Video” under “1Seg” Folder name: PRGccc File name: PRGccc, MOVccc * “MGR_INFO”: Additional information on video PRIVATE DOCOMO STILL Image in “Image Box” under “My picture” (JPG, GIF, SWF) Folder name: SUDddd File name: STILbbbb MMFILE Movie/i-motion (including AAC music data) in “Multimedia”...
Page 342: Viewing Microsd Card Data
microSD screen (p.340) Viewing microSD Card Data <microSD manager> microSD format→p.346 Check microSD……Check the microSD card to fix errors. View microSD card data. <Example: To view phonebook data> i “LifeKit” “microSD” <Check microSD> Do not remove the microSD card during Check microSD.
Page 343 File list screen (p.340) Exchanging Data between the microSD Card and FOMA When selecting data other than PIM data (Phonebook/Schedule/Inbox/Outbox/Draft/Text Terminal memo/Bookmark/Learning data/Own dictionary) in the microSD manager screen, the function menu of respective content appears. Data that can be copied Edit title ■PIM data Copy/Add to ph., Copy/OW to phone...
Page 344 Still images recorded with 1Seg cannot be copied. When you receive a call, mail or alarm notification while copying still images or movies to the You cannot copy while the microSD card is being microSD card, copying to the microSD card is accessed.
Page 345 Copying the microSD card data to the FOMA terminal <Copy mail> When the Inbox or Outbox is full, performing ● Copying PIM data to the FOMA “Copy/Add one to ph” on the data list screen/data detail screen overwrites the oldest unprotected terminal mail or read mail.
Page 346 Copying data to another folder in the Moving the microSD card data to the microSD card FOMA terminal ® You have to create the destination folder Moved i-motion, Chaku-Uta-Full or e-book/e- beforehand. → p.349 comic is saved to each Inbox folder. Videos recorded with 1Seg cannot be moved.
Page 347: Backing Up All The Foma Terminal Data At Once
Restoring data to the FOMA terminal Backing Up All the FOMA <Restore to phone> Terminal Data at Once Note that stored FOMA terminal data will be replaced with backup data in the microSD card. Back up all the FOMA terminal data at once to a Check if there is important data before restoring.
Page 348: Managing The Microsd Card
Select an item Managing the microSD Card Formatting the microSD card enables you to use the card on the FOMA terminal or check the usage status. Formatting the microSD card Backup data detail Function menu p.346 * Make sure to format a card on N-02A. You may not be able to use a microSD card formatted on Refer to backup data screen another handset or PC.
Page 349: Setting The Usb Mode
microSD mode……Use the external connector as a Setting the USB Mode microSD card reader/writer. <USB mode setting> • “ ”: The FOMA USB Cable with Charge Function 01/02 is not connected Set the USB mode to use various functions by •...
Page 350: Operating Folders And Data
■ To release the print settings of the ■ Important selected image Ensure that the FOMA terminal and PC are “Print OFF” properly connected. An improper connection ■ To release the print settings of all the may not only prevent data transfer but also result stored images in data loss.
Page 351 Delete folder……Delete a folder even if it contains data. microSD folder list screen • For Music, select Delete this/Delete selected/Delete all after entering your security code. Edit folder name *3*4 ……Delete all stored data. Data in the Delete all Create folder ……Enter a folder name to create a folder.
Page 352 Use b to select a checkbox ( □ ) Managing the Phonebook and o (Finish) “YES” SMS in a FOMA Card (UIM) <UIM operation> Exchange phonebook or SMS data between the FOMA terminal (Phone) and FOMA card (UIM). You can also delete phonebook or SMS data in the FOMA terminal (Phone) or FOMA card (UIM).
Page 353 u (FUNC) “UIM operation” Using Infrared Data “Move to UIM” or “Copy to UIM” Exchange/iC Communication “YES” ■ To move or copy received SMS in the Exchange data such as phonebook entries and FOMA card (UIM) received mail with other devices equipped with the “Move from UIM”...
Page 354 Transferring all may change the order of data on Transferred data the recipient. You can send/receive up to 9 double-byte or 18 For data received on the FOMA terminal, see Table single-byte characters for titles of still images, 2 (p.352). movies, i-motion or PDF data and up to 25 double- The FOMA terminal may not properly receive some byte or 50 single-byte characters for titles of...
Page 355: Data Exchange
Note the following when you transfer Schedule Session number data: • A single i-schedule data is transferred as a “Send all” and “Receive all” require the session normal Schedule data. number to authenticate the sender and recipient • “Send all” does not send i-schedule data. devices.
Page 356: Infrared Data Exchange
“Receive” Direct the infrared Transferring one data at a time via infrared data exchange data port toward the other party’s <Send Ir data/Receive Ir data> device Receive data from the other party’s device Exchange one data at a time with other devices using the infrared data exchange function.
Page 357 ● Receiving all data at a time Transferring one data at a time via iC communication Receive Ir data screen (p.354) <iC transmission/Touch to receive data> “Receive all” Exchange one data at a time with other devices using Enter your security code the iC communication function.
Page 358: Preventing Forwarding Phonebook Images
Charge Function 01/02 (OBEX™ communication), you need to install “ ドコモケータイ datalink” <Example: To send all phonebook data> (DOCOMO keitai datalink) (p.437) and “FOMA 通信 Phonebook list screen (p.87) 設定ファイル ” (FOMA communication setting file) u (FUNC) “iC trans. all”...
Page 359: Remote Control
Using the Infrared Remote Viewing PDF Data <My document> Control Function Use PDF Viewer to view PDF data downloaded from sites in addition to the pre-installed PDF data To use the remote control function, download the (Overseas Use Guide). You can also view PDF data software supporting the device you use (the remote stored in a microSD card.
Page 360 PDF data list screen (p.357)/ While viewing a part of a PDF data partially Document list screen (p.359) downloaded by page, attempting to view a page The available functions vary depending on the that has not been downloaded starts data selected folder.
Page 361: Viewing Documents
Document list Viewing Documents <Document viewer> Document type icon Available operation icon Use Document viewer to view a document attached to mail or stored in a microSD card. ■Available document types ■Document type icon Document type File extension Excel (Excel 97 to Excel 2007) xls, xlsx Icon Description ...
Page 362: Using The Toolbar
● Using the toolbar Icon Description 8: Show/Hide the toolbar (scrollbar) Display a single page on the screen. o (Tool): Switch from the page operation to the Display pages continuously. toolbar operation o (Cancel): Switch from the toolbar operation to Display the document in double-page the page operation spread.
Page 363 ● Using a bookmark to view a PDF data PDF data screen (p.357)/ If bookmarks are already set in a PDF data, follow Document screen (p.359) the steps below to jump to the location (page) When opening from a site or mail, when opening a where a bookmark is set.
Page 364: Viewing E-Books/E-Comic
……Display the PDF data Document property Viewing e-books/e-comic properties. <Manga&Book> End……Close the current screen. Document info……View the PDF data name and file Use Manga&Book to view XMDF (extension zbf) or save date and time. TEXT (extension zbk) e-book/e-comic downloaded from a website or stored in Data box or microSD card Delete this……Delete the currently displayed PDF data/ (Movable contents folder).
Page 365 Manga&Book list Manga&Book list screen (p.362) Type icon Title The available functions vary depending on the selected folder. Menu items displayed in the Available Retrieval method operation icon function menu also vary. icon Edit title ■e-book/e-comic type icon Information……Display the e-book/e-comic file name and save date and time.
Page 366 ● Jumping to another page Manga&Book screen (p.362) Manga&Book screen (p.362) Settings o (Move) Select any item: Font size……Select Large/Standard/Small. To top Text direction……Select Vertical/Horizontal. To end Ruby……Select ON/OFF. Table of contents Vibrator……Select ON/OFF. Move by ％……Display a page whose position is Display size……Select Normal/Double.
Page 367 Convenient Functions Multiaccess Multiaccess ....................Multitask Multitask......................Viewing Data in Chronological Order............ Life history viewer Turning Power On/Off Automatically ..........Auto power ON/OFF Checking Network Status ................. Network status ch-key setting Changing the Shortcut Function of the Channel Key........Sorting the Main Menu ....................370 Alarm Using the Alarm Function ..................
Page 368: Multiaccess
● Receiving a voice call during i-mode/ Multiaccess <Multiaccess> packet communication When you receive a voice call while using i-mode, This convenient service lets you use voice receiving or sending i-mode mail or using packet communications, packet communications and SMS communication by connecting the FOMA terminal to a simultaneously.
Page 369: Multitask
Switching tasks Multitask <Multitask> When multiple tasks are active, switch them or end all tasks at once. Multitask enables you to use multiple functions simultaneously. While multiple tasks are active Multitask Combinations → p.464 i (MULTI) Active task icons appear on the task change screen (p.367) during multitask.
Page 370: Life History Viewer
Guide to the Life history viewer screen Viewing Data in Chronological Order <Life history viewer> View images you stored, mail sending/receiving history, etc. in chronological order. The following data types are available: • JPEG still images and images • Movies and i-motion •...
Page 371: Auto Power On/Off
Life history viewer screen Checking Network Status (p.368)/Life history viewer <Network status> enlarged screen (p.368) Check the signal strength for call/packet Disp. enlarge ……Display the Life history viewer transmission. enlarged screen. i “Settings/Service” “Other Open……Activate a function corresponding to the data settings”...
Page 372: Alarm
Highlight an item to set Sorting the Main Menu o (Edit) Sort menus supporting user customization. You can Select any item: also sort sub items. In the pre-installed menus, “ 拡大メニュー ” Edit title (Enlarged menu) of the Kisekae Tool can be sorted. Time setting……Enter time to sound an alarm.
Page 373: Schedule
Downloading i-schedule Alarm list screen (p.370)/Alarm detail screen (p.370) Download i-schedule from sites. Downloaded data, as well as normal schedules or holidays, appear on Edit the Schedule screen. You can view i-schedule without ……Display the alarm content. Display detail viewing other data. Downloading schedule data and i-schedule→...
Page 374 Alarm……Select ON/“ON/Set time” (01 to 99 i-schedule list screen (p.371)/ minutes)/OFF. i-schedule detail screen Alarm tone……Select an alarm tone from Quick Search → p.191 Clock Alarm Tone, Melody, i-motion, Music or another folder. → p.114 Add desktop icon Illumination……Select a flashing color for Delete……Select Delete this/Delete selected/Delete all.
Page 375: Continued On Next
Select an item Adding holidays/birthdays If a phone number, URL or mail address is Add holidays/birthdays. contained in the schedule content, the Phone To, Up to 100 holidays can be added. The national Web To or Mail To function is available. public holidays stored at the time of purchase are not included in this number.
Page 376: Adding To Do List Entries
……Reset national public holidays to Reset holiday Adding To Do List Entries default. The added holiday data is deleted. <To Do list> Delete……Select Delete this/Delete selected/Delete all/ Delete past. You can manage your schedule by adding entries to • When Delete past is selected, all entries before the date To Do list.
Page 377 Checking entries Pattern……Select a flashing pattern for illumination. To Do list screen (p.374) Select ……Set the completion date. Completion date an entry Enter date……Enter the date. Choose date……Select a date from the calendar. The status appears. The blue icon changes into red after the set date date……Do not set the completion date.
Page 378: Alarm Setting
Alarm notification action Setting the Alarm Mode <Alarm setting> ● When you set an alarm After setting the alarm in “Alarm”, Set “Operation preferred” or “Alarm preferred” for the “Schedule”, “To Do list”, “Booking alarm setting of “Alarm”, “Schedule”, “To Do list”, program”...
Page 379: Priority
Checking alarm content if notification fails The volume of the “Schedule” and “To Do list” alarms is determined by “Phone” under “Ring If the alarm fails, the “ ” (Missed alarm)/“ ” volume”. (Missed program) desktop icon appears on the The volume of the alarm tone during a call is the same as “Volume”.
Page 380: Using The Security Folder
Displaying My Profile Using the Security Folder When this function is activated, only your name, the own number and the first mail address can be Set a password of a site, etc. to the security folder of displayed. “Common phrases”, and use it when entering the password on the site.
Page 381 ⇔ Big font Standard font……Change the font size of the Attach location……Store location information displayed name. →p.113 by positioning the current location or selecting from the location history. To view the stored information, ……Obtain Number B information and store Check 2in1 select “Location info detail”;...
Page 382: My Profile
Quoting your personal information Recording Your or the Other (My Profile) Party’s Voice Stored personal information allows you to check the <Voice memo (in-call)/Voice memo> FOMA terminal owner, quote the information on the text entry (edit) screen or via i-mode. There are two types of Voice memo.
Page 383: Recording Voice
Recording and Playing Alarm <Voice memo (in-call)> Tones and On Hold Tones You cannot record while a videophone call is on hold or while the function menu is open. <Voice announce> When 2in1 is in A mode or B mode and you record the other party’s voice received at the unused Record voice and set it as an original ring tone or number, “...
Page 384 As charges are accumulated on the FOMA card Playing recorded voice (UIM), the accumulated charges (starting from December, 2004) appear in the Charge field when i “LifeKit” “Voice announce” you change the FOMA card (UIM). Select an item You can reset displayed call times and charges. Displayed call times and charges are only intended “...
Page 385: Auto Reset Total Cost
Volume……Use c to adjust the alarm Resetting charges automatically <Auto reset total cost> volume. o (Finish) Configure the setting to reset the total calls cost displayed in “Call data” to zero automatically at 0:00 on the first of every month. i “Settings/Service”...
Page 386: Composing Text Memo
Using the FOMA Terminal as Composing Text Memo Calculator <Text memo> <Calculator> Write short messages as text memos. You can paste Use the FOMA terminal to perform four arithmetic a composed text memo into a schedule or mail calculations (addition, subtraction, multiplication and message.
Page 387: Using Dictionaries
Reference result screen (list/ Using Dictionaries <Dictionary> detail) (p.385) You can activate dictionaries from the function Change window ……Switch between Reference result menu of each text entry screen. → p.386 and Text edit (available only when it can be switched). i “LifeKit”...
Page 388 Using dictionaries from other Using an Earphone/ functions Microphone with Switch Select “Refer dictionary” from the function menu of <Earphone/Microphone with switch> the following screens: • Text edit screen, Mail detail screen, Compose Make or receive calls using a flat-plug earphone/ message screen microphone with switch (optional).
Page 389: Auto Answer Setting
To end the call, press the switch Selecting a microphone to use when an earphone/microphone is connected for 1 second or longer <Headset mic. setting> A double-beep sounds and the call ends. Set whether to use a microphone as the FOMA terminal’s or as the earphone/microphone’s when a flat- If you subscribe to “Call Waiting”, you can answer plug earphone/microphone with switch is connected.
Page 390 ■Talking via headset (Headset service) You can talk wirelessly by connecting Wireless Connecting an earphone/microphone with switch Earphone Set 02 (optional) or Bluetooth Headset while ringing does not answer the call (commercially available) to the FOMA terminal via automatically, but removing the earphone/ Bluetooth connection.
Page 391 *3 : Sounds come from a Bluetooth device only during a ■Radio waves from the Bluetooth device can call. The clock alarm tone, instead of a tone set as an adversely affect electronic medical devices, alarm tone, comes from the Bluetooth device. etc.
Page 392: Connecting Bluetooth Devices
Registering Bluetooth devices Connecting Bluetooth devices Register Bluetooth devices on the FOMA terminal. Connect registered Bluetooth devices to the FOMA Up to 10 Bluetooth devices can be added. terminal. Set Bluetooth devices standby beforehand to be Bluetooth menu screen (p.390) registered.
Page 393 Device list screen (p.390) The Bluetooth power is off and the device is disconnected while in Dial lock/Omakase Lock. →p.390 Register devices After Dial lock/Omakase Lock is released, the Protection setting Bluetooth power is turned on and the service will Change device name be in standby mode if it was being connected or in standby while in Dial lock/Omakase Lock.
Page 394 ● Switching between the FOMA Using the Bluetooth function to talk terminal and Bluetooth device Connect a Bluetooth device to the FOMA terminal via During a call r (1 second or Headset service or Handsfree service, and talk wirelessly. longer) Connect a Bluetooth device via For operations from the Bluetooth device, see the Bluetooth device User’s Guide.
Page 395 Using the Bluetooth device to play Setting Bluetooth <Bluetooth settings> movies, videos and music Bluetooth menu screen (p.390) To play movies, videos and Music Player tracks on a “Bluetooth settings” Select any Bluetooth device, connect the Bluetooth device to the item: FOMA terminal via Audio service.
Page 397 Character Entry Text Entry........................396 5-touch Entering Text Using 5-Touch ................Editing/Saving Common Phrases ........... Save common phrases Copying/Cutting/Pasting Text ..................403 Entering Text Using Kuten Code..............Kuten code Own dictionary Saving Often-Used Words ................ Clear learned Resetting Learning Dictionary ..............Download dictionary Using Downloaded Dictionaries............
Page 398: Text Entry
Icon Description Text Entry Displayed when w can be used to switch between upper case and lower The 3 text entry methods can be used in the FOMA case, or to attach dakuten/han- A/a ゛゜ dakuten terminal: “5-touch”, “2-touch” and “T9 input”. This Displayed when q can be used to section explains text entry mainly using “5-touch”.
Page 399 Divided screen Changing the font size Some screens, such as that for storing schedule Select Small, Standard, Large or X-large for the font entries while referring to the original message, are size on the text entry (edit) screen. “Changing the Font” → p.113 split into the function operation screen and the text entry (edit) screen at the same time.
Page 400: Entering Text Using 5-Touch
Select a predicted candidate Entering Text Using 5-Touch Select “ 携帯 ” (Mobile) <5-touch> The selected word appears in the text entry area. Next predicted candidates that may follow the Enter a character by pressing a dial key several selected word appear in the operation guide area. times.
Page 401 ■ To confirm the hiragana d (Set) If the conversion candidate list includes symbols, Edit entered text pictograms or face marks, you can convert the text Press u (CHG) to to these symbols. Refer to the following lists for the readings of change text to kanji or symbols, pictograms and face marks.
Page 402 ■If you press y Description If you press during text entry, a message When Deco-mail pictograms are available, appears asking whether to exit text entry. However, the categorized Pictograph D (Deco-mail (PI・SB) this message does not appear if no text is entered. pictogram) entry screens appear.→...
Page 403: Deleting Text
Text entry (edit) screen (p.396) <Single-byte/Double-byte> You cannot switch double-byte/single-byte modes Face Mark……Display the face marks list. The in “Kanji/Hiragana input mode”. highlighted face mark appears in two lines in the face marks list, and the reading (meaning) also appears. <Line feed>...
Page 404 When you quote address information, a space may be entered between items. Common phrases can be used on the following DOCOMO accepts no liability whatsoever text entry (edit) screens: regarding the problem resulting from the incorrect • Edit text memo owner information entry.
Page 405: Copying/Cutting/Pasting Text
Highlight “<Not stored>” Move the cursor to the end of the o (Edit) Enter a common text to be copied or cut d (End) “Copy” or “Cut” phrase The selected text is stored. Up to 5,000 double- ■ For security folder byte characters or 10,000 single-byte characters Highlight “<Not stored>”...
Page 406: Resetting Learning Dictionary
Enter kuten code 2336 Resetting Learning Dictionary The character (“ 慶 ” in this example) for the <Clear learned> entered code appears and the original input mode reactivates. Clear the learning record (function to store entered ■ If there is no character corresponding to text automatically and recall as conversion the entered kuten code candidates) (Reset to default).
Page 407: Entering Text Using T9 Input
Entering Text Using T9 Input When you download 2 face mark dictionaries and <T9 input> activate both of them, face marks of the first activated download dictionary appear in the list. You can enter a character with few key presses (1 character a time) and select a character or word from Download dictionary screen the candidates.
Page 408: Change Mode
■ To display predicted candidates for the ■ To stop editing in mid-operation p (Return) highlighted reading Highlight the candidate and press r to display The candidates for the reading at the end the predicted candidates for the highlighted appear. candidate reading.
Page 409 ● Setting PinYin/Stroke preference Notes on Chinese text entry <Input mode> The following functions are not available in Chinese Set PinYin/Stroke input mode to activate input mode: preferentially when the text entry (edit) screen is • Kuten code opened in Simplified Chinese/Traditional Chinese. •...
Page 410 ● Chinese text entry (edit) screen ④ Information display area Icon Description The Chinese text entry (edit) screen consists of ①Text entry area, ②Stroke entry guidance, Input mode in Simplified Chinese ③Operation guidance area, and ④Information (PinYin/Stroke) display area. The following are descriptions of icons Input mode in Traditional Chinese displayed in each area.
Page 411 ● Entering in Stroke mode Press the dial key corresponding to your preferred kanji for 1 Enter kanji strokes and select kanji from candidates. 6 strokes are available in Stroke input mode second or longer In this example, press 1 (“日”) for 1 second or Stroke Description longer.
Page 412 Press the dial key corresponding ■ Chinese on a site or in mail to your preferred kanji for 1 You can read Chinese in i-mode mail/Deco-mail/ SMS or on the i-mode/Full Browser site screen. second or longer Text cannot be displayed properly in the In this example, press 5 (“本”) for 1 second or following cases: longer.
Page 413: Network Services
Saving and Using Services..............Available Network Services Your FOMA terminal provides you with access to a range of useful DOCOMO network services. For the outline and details on the services, refer to the reference pages in the following table. Monthly...
Page 414 ……Activate the Voice Mail service. When Activate Voice Mail Service <Voice Mail> the ring time (000 to 120 seconds) is set to 0 seconds, received calls are not recorded in the “Received calls” record. This service takes voice messages at the Voice Mail Center when you are in a location with no reception Deactivate (outside the service area) or when you turn the power...
Page 415: Using Call Waiting
You can answer another call when you receive a videophone call during a voice call or when you <Check messages> receive a voice call or videophone call during a If you have recorded messages at the Voice Mail videophone call if you activate Call Waiting and set center, “...
Page 416: Call Forwarding Service
Ending the current voice call to Basic flow of Call Forwarding service answer another voice call Call Forwarding number registered When you hear a double-beep, press y Call Forwarding service activated The first call ends and the ring tone sounds. Your FOMA terminal receives a voice or videophone call Answer a new voice call.
Page 417: Caller Id Request Service
……Check the current Call Check setting Register number……Register numbers for incoming Forwarding service settings. calls to be rejected by entering the numbers or using the Phonebook and incoming call histories. *1 : When 2in1 is in Dual mode, the screen appears •...
Page 418: English Guidance
Service Numbers <English Guidance> <Service Numbers> Set your FOMA terminal to play recorded Make a call to the DOCOMO General Inquiries or announcements in English when you are configuring Repairs number. network services such as the “Voice Mail” service or...
Page 419: Incoming Call
Set in-call arrival Selecting Actions for Calls Received During a Call Activate/Deactivate the function setting selected in “Incoming Call Mng” or check the setting. <Select in-call function> i “Settings/Service” Set how to handle voice calls, videophone calls and “Network service” “Set in-call 64K data communications incoming during a call arrival”...
Page 420: Voice Mail Service
Number Setting……Register an additional number Operate “Voice Mail”, “Call Forwarding”, etc. from notified at the subscription of the Multi number to the touch-tone general phones, payphones, DOCOMO FOMA terminal. mobile phones, etc. Highlight an item to register (or change) an additional number o (Edit) Enter a To use the “Voice Mail”...
Page 421 2in1 <2in1> <Number Setting> The registered name appears when configuring 2in1 is a service that adds another phone number Multi Number settings or selecting a phone and mail address to a mobile phone. This lets you number for each call. switch your number and address by mode according <Select ring tone>...
Page 422 [Table 1] Services available for each mode The table lists only functions whose operations vary depending on the mode. (Excluding ones whose operations are the same as those of A mode) Service A mode B mode Dual mode Voice call/ Dial Number A Number B...
Page 423 Service A mode B mode Dual mode PushTalk Dial Number A Not available Number A Receive Number A PushTalk Display Cannot be displayed Display i-αppli All available Available Available My Profile Number A/Address A Number B/Address B Number A/B Address A/B *1 : Number A is dialed by default when using A/Common setting Phonebook, and Number B is dialed by default when using B Phonebook.
Page 424 2in1 function OFF <Disp. call/receive No.> Rcv. avoid. setting……Restrict incoming calls for Names, phone numbers and mail addresses will Number A and Number B. appear in the set color on the following screens: Change rcv. avoid.……Set the Rcv. avoid. • In-call setting for Number A and Number B.
Page 425 To use the service, enter the “number” or “service When dialed from an external device or dialed code” provided by DOCOMO. The “number” is the with AT command, Number A is dialed in A mode number used to connect to the service center. The or Dual mode, and Number B in B mode.
Page 427: Overseas Use
Overseas Use Outline of International Roaming (WORLD WING)............426 Services Available Overseas ..................426 Before Overseas Use...................... 427 Making a Call in the Country of Stay ................429 Receiving a Call in the Country of Stay ................430 3G/GSM setting Switching Network Connections ..............
Page 428: Services Available Overseas
WORLD WING is DOCOMO’s international roaming Japan 81 Vietnam service that enables you to use your FOMA terminal * For other country codes and details, see the DOCOMO number and mail address while overseas as you do in “International Services Website”. Japan.
Page 429 User’s Guide [Network Services]” and “Mobile with subscribers to overseas operators other than Phone User’s Guide [International Services]”. DOCOMO. If you started to use FOMA services after To send an SMS to a user of a roaming operator September 1, 2005, you do not have to apply for overseas, enter “+”...
Page 430 For international call access code and international prefix number for the universal number, see the * Note that, in many cases, you cannot use a universal DOCOMO “International Services Website”. number when making a call from your mobile phone, public phones, your hotel telephone, etc.
Page 431: After Returning To Japan
● Making a call to a country set in network will be automatically searched and set to the “Auto int’l call set.” under “Int’l dial FOMA network (DOCOMO). assistance” “Setting the Operator Search Mode” → p.430 You can also make an international call from the phonebook, Redial or Dialed calls record.
Page 432 FOMA terminal in your destination As of October, 2008, no service provider other than country, the other party only needs to dial the DOCOMO can be selected in Japan. phone number as in Japan. When “ ” appears after you return to Japan, 090 (or 080)-XXXX-XXXX confirm that “NW search mode”...
Page 433: Activating Roaming Guidance
Up to 20 operators can be stored in the PLMN roaming set” “Display operator network list. name” “Display ON” or “Display Operators designated by DOCOMO are stored in OFF” the PLMN network list. i “Settings/Service” “Int’l roaming set” “PLMN setting”...
Page 434 Using Network Services Setting Incoming Calls to be During Roaming Rejected During Roaming <Service(Int.)> <Bar incoming when roam> Use some network services such as “Voice Mail” or Depending on the operator overseas, the setting “Call Forwarding” overseas. may be unavailable. To use “Voice Mail(Int.)”...
Page 435 Using CD-ROM ....................... 437 DOCOMO keitai datalink ....................437 For details on the data communication, refer to the “Manual for PC Connection” (PDF format) in the provided CD-ROM or NTT DOCOMO website. ® ® To view the PDF-format “Manual for PC Connection”, Adobe Reader is required.
Page 436: Data Communication
PCs are classified into 3 categories: communication environment or network traffic. packet communication, 64K data communication and • When using packet communication with DOCOMO data transfer (OBEX™ communication). PDA “sigmarion Ⅲ ” or “musea”, communication speed is up to 384 kbps for both uplink and Data transfer (OBEX™...
Page 437: Before Using Data Communication
*2 : May differ depending on the PC’s system configuration. You can transmit data with this FOMA terminal connected to the DOCOMO PDA “musea” or “sigmarion Ⅲ ”. Update “musea” to connect them to the FOMA terminal. For details on how to update, etc., visit the NTT DOCOMO website.
Page 438: Checking The Procedure
DOCOMO website and install it Using USB HUB may not work correctly. Checking the Procedure Data exchange * Also install DOCOMO keitai datalink (p.437). In data communication, a connection is made through ■Packet communication/64K data a dial-up connection with Internet service providers or communication LANs that support FOMA data communication.
Page 439: At Commands
“Phonebook”, “Mail”, etc. in the FOMA terminal to a PC and edit the data. This software is provided on the NTT DOCOMO website. For details and downloading, see the following website. You can also access the following website from the provided CD-ROM.
Page 441 Appendix/Troubleshooting Menu Function List ......................440 Character Assignment to Dial Keys ................455 Symbol Reading List....................... 458 Pictogram Reading List....................459 Face Mark Reading List ....................462 Multi Access Combinations..................... 463 Multitask Combinations....................464 Services Available for the FOMA Terminal ..............465 Options and Accessories ....................
Page 442: Menu Function List
Menu Function List settings are reset to default by “Reset settings”. ① ⑯ Refer to the Table 1 (p.453) for details on the reset settings of – and other functions. settings are reset to default by the following reset/initialization: • Reset (Mail Setting) (p.173) •...
Page 443 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page Mail Mail Chat Sound setting Alarm 1 p.182 − Setting Chat image − Read out chat − User setting Name: Own, Image: Beans, − Voice: Female 1 Emotion/Keyword Disp.
Page 444 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page i-mode Full Full Browser settings Check settings p.217 − − Browser Reset − − u i-Channel i-Channel list p.205 − (Default) i-Channel setting Ticker display ON (Indicator display: OFF) p.205 −...
Page 445 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page i-αppli i-αppli action info End stand-by All: No data p.276 − info, Security error history, Auto-start info, Trace info お気に入り : Not stored Settings/ Kisekae Tool setting p.119 −...
Page 446 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page i 55 Settings/ Incoming Record message p.67 Service call Answer message: Japanese 1 (When “Record message” is set to “ON”) Ringing time: 13 seconds (When “Record message” is set to “ON”) Disp.
Page 447 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page i 56 Settings/ Display Display setting Stand-by display Sparkle White (phone color: p.104 Service Sparkle White) Air Blue (phone color: Air Blue) Antique Gold (phone color: Antique Gold) Ash Gray (phone color: Ash Gray) Wake-up display Movement...
Page 448 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page i 63 Settings/ Display Desktop icon Theme 1 to 3 Photo mode, i-concier, Quick p.115 Service Search, 1Seg 3D display setting p.117 − i 15 Select language Japanese p.44 i 52...
Page 449 Set check new Mail - MessageF All checked p.174 − messages i 81 Host selection i-mode p.200 User setting: Not recorded SMS center selection DOCOMO p.184 − User setting: Not recorded Certificate All Valid p.200 − Certificate host DoCoMo p.202 −...
Page 450 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page Settings/ i-αppli Sound setting Multimedia preferred p.276 − Service settings i-Widget sound effect Level 4 p.290 − i-αppli call DL set Not reject p.285 − i-Widget roaming set. p.290 −...
Page 451 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page 2 Settings/ Network 2in1 setting 2in1 function p.422 − (1 second or Service service longer) Rcv. avoid. p.422 − setting Nuisance Call Blk p.415 − − Caller ID Request p.415 −...
Page 452 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page Settings/ Other Illumination Key illumination p.111 − Service settings Power ON: ON Power OFF: ON Incoming call: Pure Mint Dialing: Reflex White Talking start: Happy Yellow Mail receiving: Cute Pink Mail sending: Rainbow Emotion: Always...
Page 453 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page LifeKit Map/GPS Map p.300 − (1 second or longer) Position location p.301 − − Location notification Not recorded p.310 − Location history No location history p.311 −...
Page 454 Menu No. Ref. Main item Sub item Branch item Default setting (Key operation) page i 91 LifeKit Voice announce p.381 − UIM operation p.350 − − My Profile p.46 ⑬ p.378 Forwarding image p.356 − Text reader p.239 − − Dictionary p.385 −...
Page 455: Auto Continuous Mode
[Table 1] Other reset setting functions Function Default setting Function Default setting ① ⑫ Sort: Chronological ↑ My picture Camera Movie mode Set image disp.: Normal Select size: VGA (640 × 480) ② Music Resume play: No data File size: 2MB List setting: Title Quality setting: Super Fine mode Camera Settings...
Page 456: Simple Menu Function List
Function Default setting Function Default setting ⑯ 1Seg User settings Other During a videophone call functions Subtitles: ON (Wide: Bottom) V.phone settings: Brightness: 0 Rec. while low battery: ON Display light: All time ON 1Seg effect Last one function Sound effect: Auto Main menu: Data box Visual image effect: Dynamic Phonebook: Search reading...
Page 457: Character Assignment To Dial Keys
Character Assignment to Dial Keys Allowable characters in 5-touch Kanji/Hiragana input Numeric input Katakana input mode Alphabetic input mode mode mode ァィゥェォアイウエオぁぃぅぇぉ . / @ - : ~ あいうえおカキクケコ2 ABCabc2 かきくけこサシスセソ3 DEFdef3 さしすせそッタチツテト GHIghi4 っ...
Page 458 ゅょｬｭｮ 9 らりるれろ 1 ﾗﾘﾙﾚﾛ @docomo. .ne.jp .co.jp .ac.jp ne.jp 0 わをん゛゜ 6 ﾜｦﾝﾞﾟゎ、。 www. .com .html...
Page 459 Allowable characters in T9 Kanji/Hiragana input Katakana input mode Alphabetic input mode mode あ column, 1 ア column, 1 & ￥ 1 Single-byte space . / @ ? ! ( ) , - _ : ’ ~ か column, 2 カ...
Page 460: Symbol Reading List
Symbol Reading List You can enter the following symbols by entering and converting the readings. Some of the following symbols appear as conversion candidates when you enter and convert “きごう ”. Name Name Name Symbol Symbol Symbol (characters (characters (characters to enter) to enter) to enter)
Page 461: Pictogram Reading List
Pictogram Reading List You can enter pictograms by entering and converting the following readings. Reading Reading Reading わーい・かお・うれしいねむい・すいみん・ねる・ぐーすぺーど・とらんぷいかり・かおびっくり・おどろきだいや・とらんぷがく・かお・かなしいびっくり・おどろきくらぶ・とらんぷやだ・かお・かなしいびっくり・おどろきくるまいすかんがえる・かお・うーむどんっ・しょうげきかちんこ・かっと・かんとくほっ・かおあせあせ・あせふくろひやあせ・かおあせぺん・めもひやあせ・かおだっしゅ・にげろひとかげ...
Page 462 Reading Reading Reading くうしつ・くうせき・くうれすとらん・しょくじ・ごごるふ・すぽーつしゃ・あきはん・めしてにす・すぽーつごうかくびよういん・はさみ・とこやさっかー・すぽーつ・ぼーるまんしつ・まんせき・まんおんせんすきー・すぽーつしゃ・いっぱいがっこうばすけっとぼーる・すぽーはれ・てんき・たいようきっさてん・しょくじ・さつ・ばすけ・ばすけっとくもり・てんき・くもてん・おちゃもーたーすぽーつ・はた・あめ・てんき・かさばー・しょくじ・さけ・かんぱいふらっぐ・えふわんびーる・しょくじ・さけ・ゆき・てんき・ゆきだるまからおけ・まいく・うたかんぱいかみなり・てんき・ぴかえいが・びでおふぁーすとふーど・しょくたいふう・てんき・まる・ゆうえんちじ・はんばーがーぐるぐるゆのみ・おちゃ・ちゃおんがく・きく・へっどほんきり・てんき...
Page 463 Reading Reading Reading ろく・すうじどこもぽいんと・どこもなな・しち・すうじゆうりょう・えん・かねはち・すうじえんど・おわりむりょう・ただ・ふりーきゅう・く・すうじでんわ・でんわばんごう * Pictograms without readings can ぜろ・れい・すうじめーる・あどれす only be entered by “Pictograph”. やじるし・やふぁっくすやじるし・やどこも Pictograms may not be displayed properly on phones or computers that are not i-mode compatible. Pictograms may not be displayed properly depending on the other party’s phone model even when it is i-mode compatible.
Page 464: Face Mark Reading List
Face Mark Reading List You can enter face marks by entering and converting the following readings. All the following marks appear as conversion candidates when you enter and convert “ かお ” or “ かおもじ ”. Reading Face mark Reading Face mark Reading Face mark...
Page 465: Multi Access Combinations
Multi Access Combinations New communication Voice call Videophone i-mode mail Using Using i-mode i-αppli Current status Dial Receive Dial Receive Send Receive During a voice call △ △ × △ ○ × ○ ○ During a videophone × △ − △...
Page 466: Multitask Combinations
Multitask Combinations The following table shows combinations of functions that can be used simultaneously as multitask. The following rules may not apply depending on the function status and combination. Up to 3 functions can be used simultaneously, one from each of the following groups shown below (excluding 1Seg/Music group).
Page 467: Services Available For The Foma Terminal
Services Available for the FOMA Terminal Available service Phone number Directory assistance (pay: service charge + call charge) (No area code) 104 * Unlisted phone numbers cannot be given. Telegram (pay: telegram charge) (No area code) 115 Time (pay) (No area code) 117 Weather (pay) Area code for weather forecast you want + 177...
Page 468: Options And Accessories
Note that some products may not be available depending on the area you are in. For more information, contact a docomo Shop or service counter. For details of options and accessories, refer to relevant User’s Manual.
Page 469: Troubleshooting
Troubleshooting Check first whether the software update is required. If necessary, update the software. → p.481 Problems are categorized. Color text indicates problems, and black text indicates the points to check and reference pages. I dialed a number and initiated a call, but all I hear Power/Battery is a busy tone ●...
Page 470 ● If the format of the sender’s mail address is “phone The screen or ring tone active for an incoming number@docomo.ne.jp”, save only that phone number call or mail is the default setting as a mail address and set a distinctive ring tone for that ●...
Page 471 →p.62 ● If the sender’s mail address is not “phone number ● You cannot use Any key answer to answer a @docomo.ne.jp”, save the entire address including the videophone call. domain in the Auto-sort settings. →p.168 No operations are performed when side keys are Receiving SMS does not display the sender’s...
Page 472: Data Communications
Camera Viewing PDF Data/Documents Images taken with the camera are flickered A PDF data is not properly displayed ● When you take pictures indoors, flickering may appear ● PDF data may not be properly displayed if it contains due to the effect of fluorescent lighting, etc. Changing formats unsupported by PDF viewer or complicated the “Flicker”...
Page 473 Overseas Use “ ” or “Network re-search” does not disappear from the screen, and international roaming services cannot be used ● Select the “ (Network re-search)” desktop icon to re- search. ● Are you out of international roaming service area or is the reception poor? ●...
Page 474: If Any Error Message Appears
If Any Error Message Appears In the following table, color text indicates error “Cannot dial by Number B abroad Dial by messages, and black text indicates the explanation/ Number A” ● This message appears when 2in1 is in B mode and you solution and reference pages.
Page 475 “Connection interrupted” “Data is too long Please delete message” ● i-mode connection was interrupted due to poor ● The size including quotation marks in the main text of reception. Move to a good signal location before using i-mode mail to quote to send a reply exceeds 10,000 i-mode services.→p.44 bytes (5,000 double-byte characters in Japanese).
Page 476 “Failed to retrieve channel information” “Invalid UIM Requested service not available” ● This message appears when you display the channel ● This message appears when you select the desktop list screen for the first time after purchase or when you icon or desktop info of data protected by the FOMA attempt to display the channel list screen after resetting card security function.→...
Page 477 Select “YES” attempt to perform FOMA card (UIM) operations while and press d to retry.→pp.353, 355 PUK code is locked. Contact a docomo Shop. →p.122 “No Switch” “Reading UIM Cannot start” ● This message appears when the other party is ●...
Page 478 “Replay period has expired” “Size of data is not supported” ● This message appears when you select the desktop “Size of this page is not supported” ● The size of the data downloaded from sites (via i-mode, icon or desktop info of i-motion whose duration or period has expired.
Page 479 “This certificate has expired Connect?” “Too much data was entered” ● This message appears when you received an SSL ● Too many characters are entered, and the data cannot server certificate whose period has expired or period of be sent. Reduce the number of characters then resend. →p.189 validity is not reached.
Page 480 “Use ToruCa automatic reading function in mobile phone through reader/writer?” ● This message appears when you wave the e mark over a reader/writer with “Auto reading set” set to “OFF”. Select “YES” to use the auto reading function. → p.298 “Wrong password”...
Page 481: Warranty And After-Sales Service
Service (Charges apply and a subscription is required). *If you have a PC, you can transfer and save data such as phonebook entries to your PC using DOCOMO keitai datalink (p.437) and FOMA USB Cable with Charge Function 01/02 (Optional) or FOMA USB Cable (optional).
Page 482 Please keep a separate record of the information you have registered in your FOMA terminal. Please be aware that DOCOMO bears no obligation or responsibility in the event that data is altered or lost. When the FOMA terminal is inspected or repaired, data saved on your FOMA terminal may be altered or lost.
Page 483: I-Mode Failure Diagnosis
Check if your FOMA terminal needs an update, and if necessary, download and update the required software via packet communications. The latest information regarding software updates can be viewed on the NTT DOCOMO website or in “お知らせ” (News) of iMenu.
Page 484 When software is updated, the unique information (model, serial number, etc.) of your FOMA terminal is automatically transmitted to the server at DOCOMO. We do not use the transmitted information for any purposes other than Software Update.
Page 485 ＣｈａｎｇｅＮｏｗｒｅｗｒｉｔｅ Proceed to Step 2 in “Updating software immediately” (p.485). (Update) appears when there is a notification from DOCOMO or if update fails. Running Software Update To run Software Update, select “ ” (Update) displayed on the standby screen or use the menu screen.
Page 486 “Yes” ■ To clear “ ” without running Software Update “No” “Yes” Enter your security code Check whether software update is needed The check result appears ■ When “Update is needed” appears ＳｏｆｔｗａｒｅＵｐｄａｔｅＵｐｄａｔｅｉｓｎｅｅｄｅｄ Select “Now update” or “Reserve” Select “Now update” to update the software immediately. → p.484 Select “Reserve”...
Page 487 When download ends and “Ready to rewrite?” appears, select “OK” Software update starts. Rewrite starts after a while even if you do not select “OK”. It may take time to start rewriting. ＳｏｆｔｗａｒｅＵｐｄａｔｅソフトウェア更新中しばらくお待ちくださいＲｅａｄｙｔｏｒｅｗｒｉｔｅ？書換え完了しました電池パックを外さない再起動しますでくださいＲｅｗｒｉｔｉｎｇｉｓｃｏｍｐｌｅｔｅ...
Page 488 Check the selected date and time “YES” “OK” The software update is reserved. ■ To change the date and/or time “NO” ＳｏｆｔｗａｒｅＵｐｄａｔｅＳｏｆｔｗａｒｅＵｐｄａｔｅＲｅｓｅｒｖｅｆｏｒＲｅｓｅｒｖｅｄｆｏｒ１２／２７（Ｓａｔ）７：３０？１２／２７（Ｓａｔ）７：３０ＹＥＳＯＫＮＯ ● At the scheduled time The screen on the left appears and the software update automatically starts in ＳｏｆｔｗａｒｅＵｐｄａｔｅ...
Page 489 The pattern data is specific to a certain model of FOMA terminal. Therefore, DOCOMO may stop distributing pattern data for a model 3 years after the model is first released.
Page 490 Setting the scanning function <Set scan> When the Scanning function is set to “ON”, data and programs are automatically checked when they are executed. When the message scan is set to “ON”, the main text of SMS is automatically checked. i “Settings/Service”...
Page 491 Scanning results display ■ Scanned problems display Ｆｏｌｌｏｗｉｎｇｐｒｏｂｌｅｍｓ A list of up to 5 problems detected by the Scanning function appears, starting with the ｗｅｒｅｄｅｔｅｃｔｅｄ highest-level problem. If 6 or more problems were detected, the names of the 6th and Ｐｒｏｂｌｅｍｅｌｅｍｅｎｔ１...
Page 492: Specifications
Specifications ■ Phone Product name N-02A Size (When closed) Height: Approx. 109 mm × Width: Approx. 50 mm × Thickness: Approx. 12.9 mm (Thickest: Approx. 14.9 mm) Weight Approx. 106 g (Battery attached) Continuous standby time [FOMA/3G] Stationary (“Auto” : Approx. 550 hours In transit (“3G”...
Page 493: Image Size, Maximum Number Of Images, And Recording Time
■ Battery pack Product name Battery Pack N16 Battery type Lithium-ion Voltage 3.8V DC Current 780mAh Image Size, Maximum Number of Images, and Recording Time The following table shows image sizes, number of still images that can be stored, and video recording time supported by N-02A: ■...
Page 494 ■ Approximate recording time Available recording time for a single Available total recording time movie Image File Movie Quality setting Quality setting size size type set Long Super Long Super Fine Fine dur. Normal Fine dur. Normal Fine mode mode mode mode mode...
Page 495 Available recording time for a single Available total recording time movie Image File Movie Quality setting Quality setting size size type set Long Super Long Super Fine Fine dur. Normal Fine dur. Normal Fine mode mode mode mode mode mode 500KB Normal 176 sec.
Page 496: Specific Absorption Rate Of Mobile Phones, Etc
For further information about SAR, please see the following websites: World Health Organization (WHO): http://www.who.int/peh-emf/ ICNIRP: http://www.icnirp.de/ MIC: http://www.tele.soumu.go.jp/e/ele/body/index.htm TELEC: http://www.telec.or.jp/ENG/Index_e.htm NTT DOCOMO: http://www.nttdocomo.co.jp/english/product/ NEC:http://www.n-keitai.com/lineup/ (Japanese) Association of Radio Industries and Businesses: http://www.arib-emf.org/index.html (Japanese) *: International Commission on Non-lonizing Radiation Protection...
Page 497 Radio Frequency (RF) signals THIS MODEL PHONE MEETS THE U.S. GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Page 498: Fcc Regulations
FCC regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 499: Export Administration Regulations
Declaration of conformity The product “N-02A” is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1 (b) and 3.2. The Declaration of Conformity can be found on http://www.n-keitai.com/lineup/index.html (Japanese only). This mobile phone complies with the EU requirements for exposure to radio waves.
Page 500: Intellectual Property Rights
“HIGH-SPEED” logo are trademarks or , MovieSolid , QuickPanorama™ and registered trademarks of NTT DOCOMO, Inc. their logos are trademarks or registered trademarks of Morpho, Inc. in Japan and other countries. aFree Dial service name and logo mark are aIrSimple™...
Page 501 aContent owners protect copyrighted intellectual Others properties by WMDRM (Windows Media digital aThis product is licensed complying with the MPEG- rights management) technology. This product uses 4 Visual Patent Portfolio License, and you are the WMDRM software to access WMDRM permitted to use personally and for nonprofit protected contents.
Page 502 ACCESS CO., LTD. in Japan and other countries. aBluetooth and its logo are registered trademarks of Bluetooth SIG, INC, and NTT DOCOMO is licensed to use them. Other trademarks and names belong to their respective owners.
Page 503 [Memo]...
Page 504 [Memo]...
Page 505 [Memo]...
Page 506 [Memo]...
Page 507 Index/Quick Manual Index ..........................506 Quick Manual ........................520...
Page 508: Activate I-Αppli Via Bar Code Reader
Index Index search This index works as an alphabetical table of contents. It contains not only terms described in this manual but also terms that summarize descriptions. If you cannot find a desired word, try another keyword. <Example 1: To set Keypad lock to “ON”> Keypad lock .
Page 509 Auto save set (Still image) ..228 View microSD data..340 Change rcv. type (mail) ..147 Auto timer ....236 Brightness Change ringback tone (for caller) .
Page 510 Choku-Den....92 Data link software → DOCOMO keitai datalink Delete receiver ....147 Clear learned (character entry) .
Page 511 Easy search....4 Entering Characters ..395 DOCOMO CA Certificate ..188 e-book/e-comic ....362 Enter/Add address .
Page 512 Flashing of the Incoming call lamp View desired portion ..216 ToruCa display screen..296 (when there is a missed call) ..27 View page ....212 Hyper Clear Voice.
Page 513 Melody ....333 Upload ....216 Infrared remote control .
Page 514 Storage capacity... .494 Mail ring tone Viewing the list ... . 363 Kuten code....403 Adjust volume .
Page 515 Set check new messages ..174 Mail....170, 171 Storage capacity ... 493 Melody .
Page 516 PDF data ....357 PIN setting ....123 Download .
Page 517 Quality setting (Camera) ..225 Release restrictions ... 136 Pre-installed data... . 96 Quick Info setting ... . 254 Release secret data.
Page 518 Storage capacity (various data) . . 493 Receive option ... . .158 DOCOMO keitai datalink ..437 Store common phrases..402 Reply .
Page 519 Ticker display setting ..205 i-Channel ....205 Ticker speed setting ..205 i-mode site .
Page 520 White balance ....226 ヘルシーｉアプリ BI-LINK mobile Deco-mail Widget appli ....289 (Healthy i-αppli BI-LINK mobile) .
Page 521 Machi-chara Program list ....259 Site List ..... 332 My picture Group data list .
Page 522: Quick Manual
Quick Manual How to use the Quick Manual 简易手册的使用方法 The Quick Manual describes basic operations and 本简易手册记载了有关本FOMA手机的基本操作方法 displays of the FOMA terminal. 及显示。 To use the Quick Manual embedded in this manual, 编入本说明书中的简易手册可按照剪切线剪裁，为方便使用，请按照下图所示进行折叠。在海外利用国际漫 cut the sheets along the cutting line and fold them as described below.
Page 531 剪切线...
Page 532 剪切线...
Page 533 剪切线...
Page 534 剪切线...
Page 535 剪切线...
Page 536 剪切线...
Page 537 剪切线...
Page 538 剪切线...
Page 539 剪切線...
Page 540 剪切線...
Page 541 剪切線...
Page 542 剪切線...
Page 543 剪切線...
Page 544 剪切線...
Page 545 剪切線...
Page 546 剪切線...
Page 547 * “docomo ID and password” are required to use this site from a PC. * Please call docomo Information Center if you forget or do not have your “network PIN” or “docomo ID and password”. * May not be available in some cases depending on the conditions of your subscription.
Page 548 ● Please confirm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the i-mode site. NTT DOCOMO website http://www.nttdocomo.co.jp/english/ i-mode site iMenu ⇒...
Page 549 About Manual for PC Connection This manual describes necessary information for data communication using the N-02A and how to install "FOMA communication setting file" and "DOCOMO Connection Manager" provided in the provided CD- ROM. The procedures or screens may vary depending on your environment.
Page 550: Data Communication
This is suitable for exchanging small amount of data at high speed. a When you use packet communication with DOCOMO PDA "sigmarion Ⅲ " or "musea", the communication speed is 384kbps at maximum for both sending and receiving. It is not compatible with FOMA HIGH-SPEED Area communication.
Page 551 64K data communication is charged according to the length of time the line is connected, regardless of the amount of data. Use an access point that supports FOMA 64K data communication, such as DOCOMO Internet connection service “mopera U”, or ISDN synchronized 64K access point.
Page 552 Internet. These fees must be paid directly to the Internet service provider in addition to service fees of FOMA service. Contact your Internet service provider for details. DOCOMO Internet connection service "mopera U" is available. "mopera U" is a pay service for which you need to apply.
Page 553: Before Using
You can transmit data with the FOMA terminal connected to the DOCOMO PDA "musea" or "sigmarion Ⅲ". Update "musea" when you connect it to a FOMA terminal. For how to update it and other details, visit the DOCOMO website.
Page 554: Checking The Procedure
Installing the FOMA communication setting file embeds each driver into Windows. Using DOCOMO Connection Manager, you can easily set up packet communication and 64K data communication and create a dial-up connection. Flow chart for completing the data communication setup ■...
Page 555: Connect And Disconnect
■ Packet communication and 64K data communication Download and Install the FOMA communication setting file (drivers) /Connect to PC a Install the FOMA communication setting file from the "CD-ROM for N-02A" or by downloading from the DOCOMO website. →p.9 a Connect the FOMA terminal to the PC with the FOMA USB Cable with Charge Function 01/02 (optional). →p.7, 9 <To set up the access point using...
Page 556 Setting the USB mode setting to "Communication mode" d Set the mode before connecting to PC. i "Settings /Service" "External connection" "USB mode setting" "Communication mode" Connecting the devices The following procedure explains how to connect the FOMA USB Cable with Charge Function 01/02 (optional).
Page 557 Disconnecting the devices The following procedure explains how to disconnect the FOMA USB Cable with Charge Function 01/02 (optional). Remove the FOMA USB Cable with Charge Function 01/02 from the USB terminal of the PC Pull the FOMA USB Cable with Charge Function 01/02 out horizontally while pressing the release buttons of the external connector of FOMA USB Cable Close the external connector cap of the FOMA terminal NOTE...
Page 558: Setting The Pc
Contact your PC's manufacturer or Microsoft for information on how to set Administrator privileges on your PC. d You can download the FOMA communication setting file from the DOCOMO website. Start up Windows and insert the "CD-ROM for N-02A"...
Page 559: Control Panel
Checking the installed driver Check that the FOMA communication setting file (drivers) has been correctly installed. This section describes an example using Windows Vista. " → "コントロールパネル" (Control Panel) Select " For Windows XP Select " スタート " (Start) → " コントロールパネル " (Control Panel) For Windows 2000 Select "...
Page 560 Uninstalling the FOMA communication setting file (drivers) If necessary (when updating the drivers, etc.), uninstall the drivers as follows. The procedure for uninstalling from a Windows Vista machine is described as an example. d Uninstallation is not available while connecting the FOMA terminal with PC. d When uninstalling FOMA communication setting file, be sure to log on as Administrator.
Page 561: Docomo Connection Manager
Fare counter *：Will not be displayed by default. For details, refer to " ドコモコネクションマネージャのヘルプ " (DOCOMO Connection Manager help). The following section describes preparation before installing DOCOMO Connection Manager for the measured-rate connection.
Page 562: Before Installing Docomo Connection Manager
DOCOMO public wireless LAN utility program NOTE d If no MSXML6・Wireless LAN APIs are available in your Windows XP environment, install them before DOCOMO Connection Manager. When the confirmation screen appears on MSXML6・Wireless LAN APIs installation, click "Install" to proceed it. Restart Windows after completion of installing MSXML6・Wireless LAN APIs, and DOCOMO...
Page 563: Installing Docomo Connection Manager
Installing DOCOMO Connection Manager d When installing "DOCOMO Connection Manager", be sure to log on as Administrator. If you attempt to install the software with another account, an error occurs. Contact your PC's manufacturer or Microsoft for information on how to set Administrator privileges on your PC.
Page 564: Starting Docomo Connection Manager
Starting DOCOMO Connection Manager Start DOCOMO Connection Manager For Windows Vista and Windows XP " or "スタート " (Start) → " すべてのプログラム " (All programs) → "NTT DOCOMO" → " ド Open " コモコネクションマネージャ " (DOCOMO Connection Manager) → " ドコモコネクションマネー...
Page 565: Executing Set Data Communication
Click the tab of the desired connection method, and click " 接続する" (Connect) For details, refer to " ドコモコネクションマネージャ操作マニュアル " (DOCOMO Connection Manager operating manual). When connection is not available, check “Setting up Dial-up Network” (p.18) and “Setting up Dial-up”...
Page 566 When this happens d Check the followings if you cannot connect to the network or dial-up successfully. Problem Points to check ・ Check if your PC satisfies the required operational environment (p.4). "N-02A" is not recognized by the PC. ・ Check if the FOMA communication setting file (drivers) is installed. ・...
Page 567: Setting Up Dial-Up Network
Setting up Dial-up Network This section describes how to set up a dial-up connection for packet communication / 64K data communication without using DOCOMO Connection Manager. The flow of operation is described below. d It is unnecessary to set up the dial-up network for 64K data communication. Go on to "Setting up Dial- up"...
Page 568 d To check the COM port on Windows XP Open " スタート" (Start) →" コントロールパネル" (Control Panel) Open "電話とモデムのオプション" (Telephone and modem options) from " プリンタとその他のハードウェア" (Printers other hardware) in Control Panel If the "所在地情報" (Address information) screen is displayed, enter "市外局番／エリアコード"...
Page 569 d To check the COM port on Windows 2000 Open "スタート" (Start) → "設定" (Settings) → "コントロールパネル" (Control Panel) Open "電話とモデムのオプション" (Telephone and modem options) in Control Panel If the "所在地情報" (Address information) screen appears, enter "市外局番 " (Area Code) and click "OK" Click the "...
Page 570 Phonebook of mobile phone Data to be registered Phone number Memory number of Phonebook Other party's name ─ ○ (DOCOMO Connection Manager, ○ (Dedicated software required) How to register Register using PC etc.) Register using Mobile phone × (Cannot even confirm) ○...
Page 571 Select "FOMA N02A" from " 接続方法" (Connection method), and click "OK" Click "キャンセル " (Cancel) after the connection screen appears. If a COM port of "FOMA N02A" can be selected When Properties of the COM port is displayed, click "OK". In this example, "COM3"...
Page 572 AT＊ DGPIR=2 Confirm that "OK" appears and click " ハイパーターミナルの終了" (Close Hyper terminal) in the "ファイル" (File) menu NOTE d The Caller ID needs to be set to "Notify" to use DOCOMO's internet connection service mopera U or mopera.
Page 573: Setting Up Dial-Up
About 186 (Notify)/184 (Not notify) in Dial-up Network You can attach 186/184 to the access point number in the Dial-up network settings as well. The following table shows what happens if you set 186/184 both for the ＊ DGPIR command and the Dial-up network setting.
Page 574 Select the " ダイヤルアップの電話番号" (Phone number for dial-up) and enter the number of the access point You can leave user name and password blank for mopera U or mopera connection. To connect to any other provider than mopera U or mopera, enter the user name and password specified by the provider or network administrator in the "...
Page 575 Click the "ネットワーク" (Network) tab and set up each setting Check only "インターネットプロトコルバージョン 4（TCP/IPv4）" (Internet Protocol version 4 (TCP/IPv4)) in the "この接続は次の項目を使用します " (Use the following items for this connection). Check "QoS パケットスケジューラ " (QoS Packet Scheduler) and other items if instructed by the provider.
Page 576 Setting up dial-up on Windows XP Open "スタート" (Start) → "すべてのプログラム" (All programs) → "アクセサリ" (Accessories) → "通信" (Communication) → "新しい接続ウィザード" (New connection wizard) When the "新しい接続ウィザード" (New Connection Wizard) screen appears, click "次へ" (Next) Select "インターネットに接続する" (Connect to the Internet) and click "次へ "...
Page 577 Enter the number of the access point in the " 電話番号" (Telephone Number) column and click " 次へ" (Next) This screen is an example of accessing mopera U by packet communication. Click "次へ" (Next) You can leave user name and password blank for mopera U or mopera connection.
Page 578 Confirm the settings on the " 全般" (General) tab If two or more modems are connected to the PC, confirm that only "モデム−FOMA N02A" (Modem - FOMA N02A) is checked in the "接続方法" (Connection method) column. If not, check it. Confirm that "...
Page 579 Setting up dial-up on Windows 2000 Open " スタート" (Start) → " プログラム" (Programs) → " アクセサリ" (Accessories) → "通信" (Communication) → "ネットワークとダイヤルアップ接続" (Network and Dial-up connections) Double-click " 新しい接続の作成" (Create a new connection) in Network and Dial-up Connections "...
Page 580 Set up the " 接続" (Connection) tab as shown on the right and click the "アドレス" (Address) tab To connect to any other provider than mopera U or mopera, enter exact information specified by the Internet service provider or network administrator in "...
Page 581 Select "いいえ" (No) and click "次へ" (Next) Click "完了" (Finish) Select the icon created for the dial-up and open " プロパティ " (Properties) in the " ファイル" (File) menu Confirm the settings on the " 全般" (General) tab If two or more modems are connected to the PC, confirm that only "モデム−...
Page 582 Clear all the boxes and click "OK" When the Step 20 screen reappears, click "OK" Running dial-up connection This section describes how to make a dial-up connection for packet communication by using the dial- up setting. <Example: For Windows Vista> Connect the FOMA terminal to the PC with the FOMA USB Cable with Charge Function 01/02 (optional) "Connecting the devices"→...
Page 583: Access Point
<The Connecting screen appears> While this screen appears, the log-on process such as confirmation of the user name and password is performed. <Completion of the connection> When the connection is complete, a screen indicating the completion of the connection appears. Click "...
Page 584: At Command List
AT Command List AT commands available on FOMA terminal d The following abbreviations are used in the AT command list; [&F] : Command of which setting is initialized by AT&F command. [&W] : Command of which setting is saved by AT&W command. The setting can be retrieved by ATZ command.
Page 585 AT command Outline Parameter/description Command execution example AT&W Stores the current settings. Only = 0 can be specified (can be omitted). AT&W0 AT&W AT&W? ERROR AT&W＝? ERROR AT＊DANTE Displays the FOMA terminal AT＊DANTE 0： FOMA terminal signal reception level is displayed as ＊DANTE:3 signal reception level.
Page 586 AT command Outline Parameter/description Command execution example AT+CBC Displays the battery status Result: +CBC:<bcs>,<bcl> AT+CBC of the FOMA terminal. bcs: +CBC:0,70 0 : FOMA terminal is powered by the battery. 1 : FOMA terminal is not powered by the battery. AT+CBC? 2 : FOMA terminal is not connected to the battery.
Page 587 AT command Outline Parameter/description Command execution example AT+CLIP= Displays the other party's = 0 : Not display the result (initial value) AT+CLIP=0 Caller ID on a PC when a = 1 : Display the result 64K data communication call is received. AT+CLIP=? AT+CLIP? +CLIP:(0,1)
Page 588 AT command Outline Parameter/description Command execution example AT+COPS Selects the network Format : AT+COPS=<mode>,2,<oper> AT+COPS=0 operator to connect. mode=0 : automatic (searches the network AT+COPS? and switches the network operator +COPS:0 automatically) mode=1 : manual (connects to the network AT+COPS=? operator specified in <oper>) +COPS:(2,,,"44F001"), mode=2 : Disconnects the connection to the...
Page 589 AT command Outline Parameter/description Command execution example AT+CPIN Enters the PIN code in the Format: AT+CPIN="<pin>","<newpin>" (The status in which FOMA terminal. +CPIN: READY is This command is to enter the PIN1, answered when PIN2, or PUK code - depending on +CPIN? is entered) the state of the result code returned AT+CPIN="1234"...
Page 590 AT command Outline Parameter/description Command execution example AT+CREG= Specifies whether the result = 0 : Not informed (initial value). AT+CREG=1 screen is present regarding = 1 : Informed. the inside/outside the (Set to informed) Informed when switching between service area information "Inside the service area"...
Page 591 = 0 : Disconnect the line (can be omitted). (During packet for the FOMA terminal. communication) NO CARRIER Displays the ID code. = 0 : Displays "NTT DoCoMo". ATI0 NTT DoCoMo = 1 : Displays the product name (same with +GMM). ATI1...
Page 592 AT command Outline Parameter/description Command execution example ATS0= Specifies how many times = 0 : No automatic answer (initial value). ATS0=0 the FOMA terminal rings = 1- 255: A call is automatically answered before it automatically ATS0? after the specified number of receives a call.
Page 593 AT command Outline Parameter/description Command execution example ATS104= Sets the calling sub address = 0 : # ATS104=0 character. = 1 : % (initial value) = 2 : & ATS104? ATS104=? [&F] ERROR Specifies whether the result = 0 : Returns the result code in numeral ATV1 code is returned in numerals value.
Page 594 d Supplementary explanation of AT command ■ Commands which do not function The following commands do not generate errors but will not function as a command: ・ ATT (Tone setting) ・ ATP (Pulse setting) ■ Command name: +CGDCONT=[parameter] ・Outline Sets the access point name (APN) for packet origination. Though this command is a setting command, it will not be recorded in non-volatile memory written by [&W], nor reset by [&F] or [Z].
Page 595 ・Command execution example Only the following 4 patterns can be set. (1) is set as an initial value to each cid. Command for permitting all speeds of both uplink and downlink (when cid is 2) AT+CGEQMIN=2 Command for permitting only the speed of uplink 384kbps and downlink 7,232kbps (when cid is 4) AT+CGEQMIN=4,,384,7232 Command for permitting uplink 384kbps and all speeds of downlink (when cid is 5).
Page 596: Result Codes
Result codes ■ Result codes related with data communication Number Character indication Description indication Successfully executed. CONNECT Connected. RING Incoming call. NO CARRIER Line disconnected. ERROR Command not acceptable. NO DIALTONE Unable to detect dialing tone. BUSY Busy tone detected. NO ANSWER Time out in connection completing.
Page 597 Result code display example ■ When ATX0 is set Regardless of the AT¥V n command (p.42) setting, only CONNECT appears when the connection is completed. Character indication example: ATD ＊ 99 ＊＊＊ 1# CONNECT Number indication example: ATD ＊ 99 ＊＊＊ 1# ■...
Page 598 Kuten Code List...
Page 599: Kuten Code List
Kuten Code List <Guide to the kuten code table> First enter “digits 1-3 of the kuten code” then “digit 4”. d Some kuten codes in the table here may look different from what actually appear on screens. First to third First to third First to third Fourth digit of Kuten codes...
Page 600 First to third First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of digits of Kuten codes Kuten codes Kuten codes 糊袴股胡菰虎誇跨鈷雇宕...
Page 601 First to third First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of digits of Kuten codes Kuten codes Kuten codes 偃假會偕偐偈做偖偬偸愴...
Page 602 First to third First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of digits of Kuten codes Kuten codes Kuten codes 燹燿爍爐爛爨爭爬爰艝...

Docomo STYLE N-02A Instruction Manual

How to Use this Manual (Continued)

Before Using the Handset

Function Menu

Voice/Videophone Calls/Pushtalk

Sound/Screen/Light Settings

Security Settings

Table of Contents

I-Mode/I-Motion/I-Channel/ I-Concier

Full Browser/Pc Movie

Music

I-Αppli/I-Widget

Data Management

Convenient Functions

Character Entry

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Docomo STYLE N-02A

Summary of Contents for Docomo STYLE N-02A