Screen Lock - Docomo Arrows NX F-06E Instruction Manual

❖
Changing PIN code
Set the PIN code (mark [Lock SIM card]) in advance.
1
From the Home screen,
[Security] [Set up SIM/RUIM card lock]
2
[Change SIM PIN]
3
Enter the current PIN code [OK]
4
Enter the new PIN code [OK]
5
Re-enter the new PIN code [OK]
❖
Entering PIN code
1
Turn power ON Enter PIN code on the PIN
code entry screen
❖
Disabling PIN lock
If PIN code is locked, unlock PIN and set new PIN code.
1
Enter PUK code in the PIN code entry screen
2
Enter the new PIN code
3
Re-enter the new PIN code

Screen lock

The lock screen can be displayed to prevent misoperation.
❖
Set to display the lock screen or authenticate on the lock
screen when returning from the sleep mode.
[Settings]
1
2
❖
1
1
134
Selecting lock
To select [Security on], set security unlock preference in
advance. P135
From the Home screen,
[Security]
[Select lock] Select an item
Locking/Unlocking screen
Lock
P/Press the fingerprint sensor
The terminal goes into sleep mode and the screen is
locked.
Unlock
In sleep mode, press P/the fingerprint sensor
On the lock screen,
Depending on the lock selection ( P134),
authentication is operated on the lock screen.
For fingerprint authentication, if you press the
fingerprint sensor in Step 1, release your finger from the
fingerprint sensor and then slide with the registered
fingerprint to unlock.
When the fingerprint authentication is not available,
you can authenticate by tapping other unlocking
method button.
[Settings]
Settings