Docomo Arrows NX F-06E Instruction Manual page 120

❖
Advanced Wi-Fi settings
1
From the Home screen,
Fi]
2
[Advanced]
3
Set each item
Network notification : Set to notify you when Wi-Fi open
network is available.
Wi-Fi Auto ON/OFF : Turn Wi-Fi to ON/OFF automatically
using information from the mobile network base
station. Set whether to automatically turn Wi-Fi to ON
or OFF if detecting an area where Wi-Fi connection was
performed.
Wi-Fi sleep policy : Set whether to use Wi-Fi when the
terminal screen is OFF or while the battery is charged.
Avoid poor connections : Set whether not to use Wi-Fi
network when it is unstable.
Wi-Fi frequency band : Set Wi-Fi frequency band.
Wi-Fi optimization : Set whether to minimize battery
usage when Wi-Fi is ON.
MAC address/IP address : Display MAC address, IP
address.
auto-IP setting : Enable/disable auto-IP function.
✔INFORMATION
[Wi-Fi Auto ON/OFF] does not work if Airplane mode or Wi-Fi
tethering is ON.
The terminal may not connect automatically even when [Wi-
Fi Auto ON/OFF] is activated because Wi-Fi information in the
area is changed etc. In such case, connect manually.
You can connect through simple operations when connecting
[Settings] [Wi-
via a Wireless access point supporting AOSS or WPS.
1
2
✔INFORMATION
118
Easy Wi-Fi registration
From the Home screen,
registration]
[Easy Wi-Fi registration] Select a registration
method
AOSS system : [AOSS system] Tap [AOSS] button
Perform operations on the access point
registration screen, [Finish]
For the first using, agree to "
(License Agreement)".
WPS system : [WPS system] [Push button system]/[PIN
entry system (8 digits)]/[PIN entry system (4 digits)]
Perform necessary operations on the access point
In case of push button method, press a dedicated button
on an access point. In case of PIN entry method, enter
PIN code displayed on the terminal to an access point
device and tap [OK].
For some wireless LAN access points, AOSS connection
may not be established. If connection is failed, use WPS
connection or connect manually.
When security on the wireless LAN access point is set to WEP,
you cannot connect in WPS system.
[Easy Wi-Fi
On the
Settings