Docomo Arrows NX F-06E Instruction Manual page 184

❖
When software update is necessary
If the update file is downloaded automatically,
update available) appears on the status bar.
When the rewrite start time is reached with
update available) displayed, software is automatically
rewritten and (software update available) disappears.
1
Open the Notification panel and tap the
notification
Software update notice screen appears.
Rewrite notice screen
2
Perform target operations
Closing confirmation :
Return to the Home screen. Updating starts when the
preset time is reached.
Changing preset time :
For reserved update
Rewriting immediately :
For updating immediately
immediately"
(software
(software
[OK]
[Set Time]
P183 "Reserving software update"
[Start update]
P182 "Updating software
✔INFORMATION
If the software is not updated when the update notification is
received, (software update available) appears on the
status bar.
If software update at the preset time could not be performed,
the software update will be performed at the same time the
following day.
Software cannot be updated automatically when the Auto-
update setting is set to [Manual Update] or while updating
software by Now update.
Updating software immediately
Software update starts immediately.
There are 2 ways to activate software update: activating
from Software update notice screen and activating from the
menu.
<Example> Activating software update from the setting
menu
1
From the Home screen,
[About phone] [Software Update]
2
[Start the software update] [Yes]
If software update is not needed, [No update is needed]
is displayed.
Activating from Software update notice screen :
Software update notice screen [Start the software
update]
182
[Settings]
Display
Appendix/Index