Bluetooth Communication - Docomo Arrows NX F-06E Instruction Manual


Bluetooth communication
You can connect the terminal and a Bluetooth device to perform
wireless communication or play voice sound or music.
Note that using Bluetooth connection makes battery
consumption faster.
Wireless communication is not guaranteed for all Bluetooth
devices.
✔INFORMATION
For information on compatible Bluetooth version, profiles,
etc., see "Main specifications". P186
Full Seg/1Seg sound can be only played back with A2DP
compatible Bluetooth device that supports SCMS-T content
protection method.
For operations of the Bluetooth device, refer to the operation
manual of your Bluetooth device.
❖
Handling precautions when using
Bluetooth function
Connect with another Bluetooth device keeping the line-of-
sight distance to 10 m or shorter. Distance available for
connection may be shorter if obstacles exist between the
terminal and the Bluetooth device or depending on
surrounding (wall, furniture, etc.).
Place a Bluetooth device as far as possible from other electric
appliances, audio visual devices and office appliances. A
microwave oven strongly affects the connection when it is
operated. Connection may not be established correctly when other
devices are powered on, or the connection may cause noises on TV
or radio or reception difficulty.
Under strong ambient signals, connection may not be
established.
Radio waves emitted by a Bluetooth device may affect electronic
medical equipment. Turn off the terminal and other Bluetooth
devices in a train, aircraft or hospital, near an automatic door or fire
alarm, and at a place where flammable gases are generated such as
a gas station. Otherwise, under certain circumstances, an accident
may result.
❖
Radio wave interference with wireless
LAN
Because a Bluetooth device and wireless LAN (IEEE802.11b/g/
n) use the same frequency band (2.4 GHz), if the device is used
near a device with wireless LAN capability, radio wave
interference may occur, and communication speed may be
reduced, noise may occur, or connection may not be
established. In this case, turn the wireless LAN device power
off, or move the terminal and the Bluetooth device away at
least 10 m from the wireless LAN device.
Bluetooth function ON/OFF
Set Bluetooth to ON to use Bluetooth function. When you do
not use Bluetooth, set it to OFF in order to cut the battery
power consumption.
When activated,
Turning the power OFF does not change Bluetooth ON/OFF
setting.
1
From the Home screen,
2
[Bluetooth] to [ON]/[OFF]
When the screen about aptX appears, tap [OK].
154
appears on the status bar.
[Settings]
Data communication