Schedule Do Not Disturb On / Off; Setting Do Not Disturb Schedule - DKS 1816 Owner's Manual

Telephone intercom system

Hide thumbs Also See for 1816:

Table of Contents

3.5.3 Scheduled Do Not Disturb On / Off

This programming sequence is used by the doorman or system administrator to turn the

preprogrammed do not disturb schedule on or off.

Note: If programmable directory codes are used, enter the directory code number instead of

the relay number in step 3.

Factory Default = 0 (Off)

1. Take the doorman telephone off hook.

2. Press *22 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter the four-digit relay number of the resident that the schedule is being administered on

for _ _ _ _ then press * (beep). Note: entering 9 9 9 9 in this step will turn the schedule on

for all residents.

4. Enter 0 to turn the schedule Off, or enter 1 to turn the schedule On, then press * (beep).

5. Hang up the doorman telephone to end the programming session.

This programming sequence is used by the doorman or system administrator to set a do not disturb

schedule for residents.

Note: If programmable directory codes are used, enter the directory code number instead of

the relay number in step 3.

Factory Default = 12:00 AM to 6:00 AM Sunday through Saturday

1. Take the doorman telephone off hook.

2. Press *23 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter the four-digit relay number of the resident that the schedule is being set for _ _ _ _

then press * (beep). Note: entering 9 9 9 9 in this step will set the schedule on for all

residents.

4. Enter the beginning time in hours and minutes (HHMM) _ _ _ _ then press * (beep).

5. Enter 0 for AM, or 1 for PM _ then press * (beep).

6. Enter the ending time in hours and minutes (HHMM) _ _ _ _ then press * (beep).

7. Enter 0 for AM, or 1 for PM _ then press * (beep).

8. Enter the days of the week that the schedule will be active (Sunday = 1; Saturday = 7) then

press * (beep). Note: you can enter from 1 – 7 digits in this step. For example, if the

schedule is set for Monday, Wednesday and Friday, enter 2 4 6.

9. Repeat steps 3-8 to program another resident.

10. Hang up the doorman telephone to end the programming session.

1816-065-L-11-14

Page 35

Table of Contents