Call Forward On/Off Or Time Zone Activation; Call Forward - On/Off Or Time Zone Activation; Do Not Disturb Time Zone Programming - DKS 1812 Plus Installation & Owner's Manual
Residential telephone intercom/access control system
Hide thumbs
Also See for 1812 Plus:
- Owner's manual (63 pages) ,
- Installation & owner's manual (58 pages)
Table of Contents
Advertisement
2.6.3 Call Forward - ON/OFF or Time Zone Activation
This programming sequence turns the call forward feature ON/OFF or setup a time zone activation. You must have a call
forward phone number programmed into the 1812 memory (See 2.6.2).
1. Press
2. Press 0
3. Enter the beginning hour (01 to 12) and minutes (01 to 59), then press
4. Press 0
5. Enter the ending hour (01 to 12) and minutes (01 to 59), then press
6. Press 0
7. Enter the days of the week that the call forward time zone is to be active, then press
8. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
2.6.4 Do Not Disturb Time Zone Programming
Factory setting in step 2 is 0 (DND Off).
The Do Not Disturb (DND) feature allows the resident to program a time zone when they do not want the 1812 to ring the
house phones or to call forward when the call button on the unit is pressed. For example, a resident may program a do not
disturb time zone from 10 PM to 7 AM on certain days of the week, or all seven days. Only one DND time zone can be
programmed. Once the DND time zone has been programmed, it can be turned ON or OFF as needed.
1. Press
2. Press 0
3. Enter the beginning hour (01 to 12) and minutes (01 to 59), then press
4. Press 0
5. Enter the ending hour (01 to 12) and minutes (01 to 59), then press
6. Press 0
7. Enter the days of the week that the DND is to be active, then press
8. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
30
3 7 and enter the MASTER CODE. [
*
to turn call forward OFF, OR press 1
*
forward per the call forward time zone. [ _
You can terminate here (Go to step 8 to finish) if you have previously programmed the time zone
and only ON / OFF or Call Forward per the time zone is desired.
for AM OR press 1
*
for AM OR press 1
*
[ _ _ _ _ _ _ _
(beep)]
*
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7) but all 7 spaces do not have to be populated with numbers.
For example, for the call forward to be active only on Saturdays and Sundays, enter 1 7
The order of the numbers is not important; 17 is the same as 71.
3 4 and enter the MASTER CODE. [
*
to turn DND OFF, OR press 1
*
You can terminate here (Go to step 8 to finish) if you have previously programmed the DND time zone
and only ON / OFF is desired.
for AM OR press 1
*
for AM OR press 1
*
[ _ _ _ _ _ _ _
(beep)]
*
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7) but all 7 spaces do not have to be populated with numbers.
For example, for the DND to be active only on Saturdays and Sundays, enter 1 7
numbers is not important; 17 is the same as 71.
3 7 _ _ _ _ (beep)]
*
to always call forward, OR press 2
*
(beep)]
*
for PM. [ _
(beep)]
*
*
for PM. [ _
(beep)]
*
*
3 4 _ _ _ _ (beep)]
*
to turn DND ON. [ _
*
for PM. [ _
(beep)]
*
*
for PM. [ _
(beep)]
*
*
to call
*
. [ _ _ _ _
(beep)]
*
*
. [ _ _ _ _
(beep)]
*
*
.
*
.
*
(beep)]
*
. [ _ _ _ _
(beep)]
*
*
. [ _ _ _ _
(beep)]
*
*
.
*
. The order of the
*
1812-161-L-12-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
