Section 1 - Installation; General Information - DKS 1816 Owner's Manual

Telephone intercom system
Hide thumbs Also See for 1816:
Table of Contents

Advertisement

1.1 General Information

The DoorKing Model 1816 telephone intercom system provides communication to, and control of, a
door (or gate) for up to 1200 users without the need for a dedicated Central Office (C.O.) phone line.
This eliminates monthly line charges and equipment lease payments to the telephone company. The
system is used widely with housing authority projects and low income housing because the system will
provide all building residents, whether they have central office phone service or not, with communication
and control of the door or gate.
This manual describes the installation and wiring of the 1816 main and auxiliary control cabinets, and
the RJ71 phone block(s) only. For installation instructions on the front lobby panel(s) that are to be
used with the system, refer to the manual that is included with the lobby panel. The main and auxiliary
cabinets should be mounted close to the RJ71 phone blocks required for interfacing the telephone lines
with the system.
Central Office Phone Line.
Although a C.O. phone line is not required for normal system operation, having a C.O. line installed to
the 1816 main control cabinet will allow the use of the advanced features of the system. It should be
noted that this C.O. line is not used for normal lobby panel to resident communication and an access
code is required to utilize the C.O. line. Additionally, if a PC programmable telephone entry system
(DKS models 1833, 1834, 1835, 1837) is used as the lobby panel, installing the C.O. line will enable
programming of the system from an off site location. Order your telephone line at least two weeks prior
to the planned installation date. This will assure that a phone line is available when the unit is installed.
The telephone company will require the following information from you:
Type:
Ringer Equivalence:
Jack Type:
FCC Registration (US):
DOC (Canada):
Electrical Listing:
Prior to starting the installation of this system, it is highly recommended that you become
familiar with the illustrations, instructions and wiring diagrams in this manual.
It is recommended that the local telephone company install and wire the RJ71 phone blocks
required with this system.
1816-065-L-11-14

Section 1 - Installation

Touch Tone, Loop Start
0.0 A
RJ11C
DUF6VT-12874-OT-T
1736 4528 A
Complies with U.L. 294 - ETL Listed
Page 9

Advertisement

Table of Contents
loading

Table of Contents