Table of Contents
Advertisement
1. Call the phone number of the C.O. line attached to the 1816 system. The 1816 will answer
with a short tone (beep).
2. Press #1 to be connected to the doorman phone.
3. The doorman phone will ring until it is picked up OR until the number of rings programmed
in section 3.1.7 is met.
To call the lobby panel:
1. Call the phone number of the C.O. line attached to the 1816 system. The 1816 will answer
with a short tone (beep).
2. Press #2 to be connected to the lobby panel.
a. If a DoorKing 1800 series, 1830 series or "P" series lobby panel is used, the lobby
panel will answer with a 1 second tone. Once the tone is heard, press *16 and
then enter the four-digit lobby panel MASTER CODE _ _ _ _. This will open
communication to the lobby panel.
4.1.6 Remote Relay Activation
A dedicated C.O. phone line must be connected to the 1816 control panel for this feature to be operable.
This feature can only be used with DoorKing lobby panels.
1. Call the phone number of the C.O. line attached to the 1816 system. The 1816 will answer
with a short tone (beep).
2. Press #2 to be connected to the lobby panel.
3. The lobby panel will answer with a 1 second tone. Once the tone is heard, press *16 and
then enter the four-digit lobby panel MASTER CODE _ _ _ _. This will open communication
to the lobby panel.
4. Press "9" (or the number that has been programmed in the lobby panel to open the door).
4.1.7 Calling a Resident without C.O. Phone Service from an Off Site Location
A dedicated C.O. phone line must be connected to the 1816 control panel for this feature to be operable.
This feature allows managers to place a call to residents who do not have C.O. phone service from an
off site location.
1. Call the phone number of the C.O. line attached to the 1816 system. The 1816 will answer
with a short tone (beep).
2. Press #3 and enter the resident's four digit directory code. The 1816 will connect to the
resident's phone.
Page 42
1816-065-L-11-14
Advertisement
Table of Contents
