Program Call Forward Allowed Area Codes; Delete Call Forward Allowed Area Codes; Delete All Call Forward Allowed Area Codes - DKS 1816 Owner's Manual

3.6.5 Program Call Forward Allowed Area Codes

This programming sequence is used by the doorman or system administrator to limit which area codes
can be called when option 2 is selected in 3.6.1. This is a feature to prevent toll charges being incurred
on calls forwarded through the phone line connected directly to the 1816 control panel. If a call
forwarding area code does not match an area code programmed here, then the call is routed to the
resident's phone. Up to 30 area codes can be stored in the 1816 memory. A long beep is heard when
the memory is full.
Factory Default = (Not Programmed)
1. Take the doorman telephone off hook.
2. Press *46 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter a three-digit area code _ _ _ then press * (beep).
4. Repeat step 3 to program additional area codes.
5. Hang up the doorman telephone to end the programming session.

3.6.6 Delete Call Forward Allowed Area Codes

This programming sequence is used by the doorman or system administrator to delete area codes from
the allowed area code memory.
Factory Default = (Not Programmed)
1. Take the doorman telephone off hook.
2. Press *47 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter a three-digit area code _ _ _ then press * (beep).
4. Repeat step 3 to delete additional area codes.
5. Hang up the doorman telephone to end the programming session.

3.6.7 Delete All Call Forward Allowed Area Codes

This programming sequence is used by the doorman or system administrator to delete all area codes
from the allowed area code memory.
Factory Default = (Not Programmed)
1. Take the doorman telephone off hook.
2. Press *48 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter 9 9 9 9 then press * (beep).
4. Hang up the doorman telephone to end the programming session.
Page 38 1816-065-L-11-14