Table of Contents
Advertisement
3.6 Call Forwarding Features / Commands
The Call Forwarding feature provides options that can forward lobby panel calls for a resident to a
forwarding number. There are several options available on how a call is forwarded and system
administrators should review all these options.
3.6.1 Set Up for Call Forwarding - System Wide
This determines how the call forwarding feature will function system wide. Four options are available:
0. Call forwarding is turned off.
1. Calls from the lobby panel to a resident are forwarded through the phone line connected
to the 1816 main control panel.
2. Calls from the lobby panel to a resident are forwarded through the phone line connected
to the 1816 main control panel but are restricted to preset area codes.
3. Calls from the lobby panel to a resident are forwarded through the resident's own phone
line.
Factory Default = 0 (Off)
1. Take the doorman telephone off hook.
2. Press *45 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter 0 or 1 or 2 or 3 _ then press * (beep).
4. Hang up the doorman telephone to end the programming session.
3.6.2 Call Forwarding On / Off per Resident
This programming sequence is used by the doorman or system administrator to turn call forwarding on
or off per resident.
Note: If programmable directory codes are used, enter the directory code number instead of
the relay number in step 3.
Factory Default = 0 (Off)
1. Take the doorman telephone off hook.
2. Press *39 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter the four-digit relay number of the resident that call forwarding is being administered
for _ _ _ _ then press * (beep). Note: entering 9 9 9 9 in this step will turn call forwarding
on for all residents.
4. Enter 0 to turn call forwarding Off, or enter 1 to turn call forwarding On, then press * (beep).
5. Repeat steps 3 and 4 to program additional residents.
6. Hang up the doorman telephone to end the programming session.
Page 36
1816-065-L-11-14
Advertisement
Table of Contents
