Pinging Individual Mus - Motorola AP-7131 Product Reference Manual

7-30 AP-7131 Access Point Product Reference Guide
Avg Num of Retries
Dropped Packets
% of Undecryptable
Pkts
8. Click OK

7.5.2 Pinging Individual MUs

The access point can verify its link with an MU by sending WNMP ping packets to the associated MU.
Use the Echo Test
NOTE An echo test initiated from the access point
To ping a specific MU to assess its connection with an access point:
1. Select Status and Statistics
2. Select the
3. Specify the following ping test parameters.
Station Address
Number of ping
Packet Length
Packet Data
Displays the average number of retries for the MU. The number in
black represents average retries for the last 30 seconds and the
number in blue represents average retries for the last hour.
Displays the percentage of packets the AP gave up as not received
on for the selected MU. The number in black represents the
percentage of packets for the last 30 seconds and the number in
blue represents the percentage of packets for the last hour.
Displays the percentage of undecryptable packets for the MU. The
number in black represents the percentage of undecryptable
packets for the last 30 seconds and the number in blue represents
the percentage of undecryptable packets for the last hour.
to exit the screen.
screen to specify a target MU and configure the parameters of the ping test.
uses WNMP pings. Therefore, target clients that are not Motorola MUs
are unable to respond to the echo test.
- >
Echo Test button from within the
The IP address of the target MU. Refer to the
screen for associated MU IP address information.
Specify the number of ping packets to transmit to the target MU.
The default is 100.
Specify the length of each data packet transmitted to the target
MU during the ping test. The default is 100 bytes.
Defines the data to be transmitted as part of the test.
MU Stats from the access point menu tree.
MU Stats Summary
MU Stats Summary
screen
MU Stats Summary
screen