Motorola AP-7131 Product Reference Manual page 76

3-10 AP-7131 Access Point Product Reference Guide
c. If using the static or DHCP Server option, enter the network-assigned
access point.
NOTE DNS names are not supported as a valid IP address for the access point.
d. The
the network domain, the next set specifies the subset of hosts within a larger network.
These values help divide a network into subnetworks and simplify routing and data
transmission.
e. If using the static or DHCP Server option, enter a
numerical IP address of a router the access point uses on the Ethernet as its default
gateway.
f. If using the static or DHCP Server option, enter the
address.
g. If using the DHCP Server option, use the
specify a range of IP address reserved for mapping clients to IP addresses. If a manually
(static) mapped IP address is within the IP address range specified, that IP address could
still be assigned to another client. To avoid this, ensure all statically mapped IP
addresses are outside of the IP address range assigned to the DHCP server.
For additional access point LAN port configuration options, see
Interface on page
8. Enable the radio(s) using the
using a single radio access point, enable the radio, then select either 2.4 GHz or 5 GHz from
the RF Band of Operation
single-radio model. If using a dual-radio model, the user can enable both RF bands. For
additional radio configuration options, see
on page
9. Select the
its ESSID and security scheme for basic operation.
NOTE A maximum of 16 WLANs are configurable within the Wireless
The user is required to enter a numerical IP address.
Subnet Mask defines the size of the subnet. The first two sets of numbers specify
5-1.
Enable
field. Only one RF band option at a time is permissible in a
5-57.
WLAN #1 tab (WLANs 1 - 4 are available within the Quick Setup screen) to define
Configuration screen. The limitation of 16 WLANs exists regardless of
whether the access point is a single or dual-radio model.
Default Gateway
Primary DNS Server
Address Assignment Range
checkbox(es) within the Radio Configuration field. If
Configuring the 802.11a/n or 802.11b/g/n Radio
IP Address of the
to define the
numerical IP
parameter to
Configuring the LAN