Motorola AP-7131 Product Reference Manual page 242

6-26 AP-7131 Access Point Product Reference Guide
in order to reduce processor overhead. Use the WLAN Security screens (WEP, Kerberos etc.) as
required for setting user authentication and data encryption parameters.
To configure the access point firewall settings:
1. Select Network Configuration
2. Refer to the
Disable Firewall
3. Refer to the
translations.
->
Global Firewall Disable
Select the Disable Firewall
functions on the access point. This includes firewall filters, NAT, VP,
content filtering, and subnet access. Disabling the access point
firewall makes the access point vulnerable to data attacks and is
not recommended during normal operation if using the WAN port.
Timeout Configuration
Firewall from the access point menu tree.
field to enable or disable the access point firewall.
checkbox to disable all firewall
field to define a timeout interval to terminate IP address