Motorola AP-7131 Product Reference Manual page 92

4-10 AP-7131 Access Point Product Reference Guide
Switch FQDN
PSK
Auto Discovery Enable When the
Switch Interface
Enable AP-Switch
Tunnel
Keep-alive Period
Current Switch
AP adoption State
3. Refer to the 12 available
uses to adopt with a switch.
The access point contacts each switch on the list (from top to bottom) until a viable switch
adoption is made. The access point first populates the list with the IP addresses received
from its DHCP resource. If DHCP is not able to obtain IP addresses, the access point attempts
to resolve the switch's Domain Name if provided within the Switch FQDN parameter.
Add a complete switch fully qualified domain name (FQDN) to add
a switch to the 12 available switch IP addresses available for
connection. The access point resolves the name to one or more IP
addresses if a DNS IP address is present. This method is used when
the access point fails to obtain an IP address using DHCP.
Before the access point sends a packet requesting its mode and
configuration, the switch and the access point require a secure link
using a pre-shared key.
Auto Discovery Enable
access point begins the switch discovery (adoption) process using
DHCP first, then a user provided domain name, lastly using static IP
addresses. This setting is disabled by default. When disabled, the
AP functions as a standalone access point without trying to adopt
a switch. Consequently, the access point will not be able to obtain
an AAP configuration. For an overview of AAP and instructions on
how to setup the AP and switch, see
Use the Switch Interface
interface used by the switch for connectivity with the access point.
Options include LAN1, LAN2 and WAN. The default setting is
LAN1.
This setting is required to enable an IPSec VPN from the AAP to the
Wireless Switch.
The Keepalive interval defines a period (in seconds) the AAP uses
to terminate its connection to the switch if no data is received.
Displays the IP address of the connected switch. This is the switch
from which the AP-7131 receives its adaptive configuration.
Displays whether the AP-7131 has been adopted by the switch
(whose IP address is listed in the Current Switch parameter). The
AP-7131 cannot receive its adaptive configuration without
association.
Switch IP Addresses
checkbox is selected, the
Adaptive AP Overview.
drop-down menu to specify the
to review the addresses the access point