Configuring Specific Snmp Traps - Motorola AP-7131 Product Reference Manual

4-36 AP-7131 Access Point Product Reference Guide
5. Click Undo Changes
settings displayed on SNMP Trap Configuration screen to the last saved configuration.
6. Click Logout
confirming the logout before the applet is closed.

4.6.3 Configuring Specific SNMP Traps

Use the SNMP Traps
defining traps to capture unauthorized devices operating within the access point coverage area. Trap
configuration depends on the network machine that receives the generated traps. SNMP v1/v2c and
v3 trap configurations function independently. In a mixed SNMP environment, traps can be sent using
configurations for both SNMP v1/v2c and v3. To configure specific SNMP traps on the access point:
1. Select System Configuration
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point Access Point applet. A prompt displays
screen to enable specific traps on the access point. Motorola recommends
- > SNMP Access - > SNMP Traps from the menu tree.