Motorola AP-7131 Product Reference Manual page 188

5-50 AP-7131 Access Point Product Reference Guide
NOTE The Enable Hotspot User Timeout option is only available if using the
6. Click the
a set of allowed destination IP addresses. These allowed destination IP addresses are called
a White List. Ten configurable IP addresses are allowed for each WLAN. For more
information, see
NOTE If using an external Web Server over the WAN port, and the hotspot's
7. Refer to the
timeout and retry value for the Radius server.
Enable Accounting
Server Address
Radius Port
Shared Secret
Timeout
Retries
access point's internal Radius Server for user authentication.
White List Entries button (within the
Defining the Hotspot White List on page
HTTP pages (login or welcome) redirect to the access point's WAN IP
address for CGI scripts, the IP address of the external Web server and the
access point's WAN IP address should be entered in the White List.
Radius Accounting
Select the
Accounting Server used for Radius authentication for a target
hotspot user.
Specify an IP address for the external Radius Accounting server
used to provide Radius accounting for the hotspot. If using this
option, an internal Radius server cannot be used. The IP address of
the internal Radius server is fixed at 127.0.0.1 and cannot be used
for the external Radius server.
Specify the port on which the Radius accounting server is listening.
Specify a shared secret for accounting authentication for the
hotspot. The shared secret is required to match the shared secret
on the external Radius accounting server.
Set the timeout value in seconds (1-255) used to timeout users
accessing the Radius Accounting server if they have not
successfully accessed the Accounting Server.
Define the number of retries (1-10) the user is allowed to access
the Radius Accounting Server if the first attempt fails. The default
is 1.
WhiteList Configuration
field to enable Radius accounting and specify the a
Enable Accounting checkbox to enable a Radius
field) to create
5-51.