Displaying Rogue Ap Details - Motorola AP-7131 Product Reference Manual

6. Highlight a rogue AP and click the
detection information specific to that rogue device. This information is helpful in
determining if a rogue AP should be moved to the Allowed APs table.
For more information on the displaying information on detected rogue APs, see
Rogue AP Details on page
7. To remove the Rogue AP entries displayed within the e Rogue APs field, click the
Rogue AP List
Motorola only recommends clearing the list of Rogue APs when the devices displaying
within the list do not represent a threat to the access point managed network.
8. Click Apply to save any changes to the Active APs screen. Navigating away from the screen
without clicking Apply results in all changes to the screen being lost.
9. Click Undo Changes
settings displayed on the Active APs screen to the last saved configuration.
10. Click Logout
logout before the applet is closed.

6.13.1.1 Displaying Rogue AP Details

Before moving a rogue AP into the list of allowed APs within the Active APs screen, the device
address and rogue detection information for that AP should be evaluated.
To evaluate the properties of a rogue AP:
1. Select Network Configuration
the access point menu tree.
2. Highlight a target rogue AP from within Rogue APs table and click the
The screen displays for the rogue AP.
Detail
Details
6-60.
button.
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
-> Wireless
Configuring Access Point Security
button to display a screen with device and
-> Rogue AP Detection
6-59
Displaying
Clear
-> Active APs from
button.
Details