Motorola AP-7131 Product Reference Manual page 91

NOTE The Adaptive AP Setup screen does not display the AAP's adoption status
To configure the access point's switch discovery method and connection medium:
1. Select System Configuration
2. Define the following to prioritize a switch connection scheme and AP interface used to adopt
to the switch.
Control Port
or adopted switch. This information is available using the access point's
CLI. To review AAP adoption status and adopted switch information, see
AP7131>admin(system.aap-setup)>show on page
-> Adaptive AP Setup
Define the port used by the switch FQDN to transmit and receive
with the AAP. The default control port is 24576.
System Configuration
8-167.
from the menu tree.
4-9