Motorola AP-7131 Product Reference Manual page 687

Hide thumbs Also See for AP-7131:
Table of Contents

Advertisement

5. Enter the WAN port IP address of AP #1 for the
6. Within the
Remote Subnet
mask of AP #2 /Device #2.
7. Enter the WAN port IP address of AP #2/ Device #2 for a
8. Click
Apply
to save the changes.
NOTE For this example, Auto IKE Key Exchange is used. Any key exchange can
be used, depending on the security needed, as long as both devices on
each end of the tunnel are configured exactly the same.
9. Select the
Auto (IKE) Key Exchange
10. Select the
Auto Key Settings
Local WAN
and
Remote Subnet Mask
radio button.
button.
Usage Scenarios
IP.
fields, enter the LAN IP subnet and
Remote
Gateway.
B-11

Advertisement

Table of Contents
loading

Table of Contents