Motorola AP-7131 Product Reference Manual page 230

Hide thumbs Also See for AP-7131:
Table of Contents

Advertisement

6-14
AP-7131 Access Point Product Reference Guide
Max. Retries (1-99)
retries
NOTE The default values described are the recommended values. Do not change
9. Select the
interval, transmit period, and retry period for MUs and the authentication server. The items
within this tab are identical regardless of whether Internal or External is selected from the
Radius Server drop-down menu.
MU Quiet Period
(1-65535) secs
MU Timeout
(1-255) secs
MU Tx Period
(1-65635) secs
MU Max Retries
(1-10) retries
Server Timeout
(1-255) secs
Server Max Retries
(1-255 retries)
10. Click the
(including all 5 selectable tabs) of the New Security Policy screen.
11. Click the
return to the
last saved configuration.
Define the maximum number of MU retries to reauthenticate after
failing to complete the EAP process. Failure to reauthenticate in the
specified number of retries results in a terminated connection. The
default is 2 retries.
these values unless consulted otherwise by an administrator.
Advanced Settings
Specify an idle time (in seconds) between MU authentication
attempts, as required by the authentication server. The default is
10 seconds.
Define the time (in seconds) for the access point's retransmission
of EAP-Request packets. The default is 10 seconds.
Specify the time period (in seconds) for the access point's
retransmission of the EAP Identity Request frame. The default is 5
seconds.
Specify the maximum number of times the access point retransmits
an EAP-Request frame to the client before it times out the
authentication session. The default is 2 retries.
Specify the time (in seconds) for the access point's retransmission
of EAP-Request packets to the server. The default is 5 seconds. If
this time is exceeded, the authetnication session is terminated.
Specify the maximum number of times for the access point to
retransmit an EAP-Request frame to the server before it times out
the authentication session. The default is 2 retries.
Apply
button to save any changes made within the 802.1x EAP Settings field
Cancel
button to undo any changes made within the 802.1x EAP Settings field and
WLAN
screen. This reverts all settings for the 802.1x EAP Settings field to the
tab as required to specify a MU quiet period, timeout

Advertisement

Table of Contents
loading

Table of Contents