Motorola AP-7131 Product Reference Manual page 138

4-56 AP-7131 Access Point Product Reference Guide
FAIL: user interrupted
FAIL: no valid interface found
FAIL: conflict ip address
FAIL: command exchange time out
FAIL: invalid subnet number
11. Confirm the access point configuration is the same as it was before the firmware update. If
they are not, restore the settings. Refer to
for instructions on exporting the configuration back to the access point.
12. Click Apply
screen. The Apply button does not execute the firmware, only saves the update settings
entered.
13. Click Undo Changes
settings displayed on Firmware Update screen to the last saved configuration.
14. Click Logout
confirming the logout before the applet is closed.
to save the filename and filepath information entered into the Firmware Update
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point Access Point applet. A prompt displays
Importing/Exporting Configurations on page 4-46