Motorola AP-7131 Product Reference Manual page 434

8-100 AP-7131 Access Point Product Reference Guide
AP7131>admin(network.wireless.radio.802-11n[2.4 GHz])> set
Description:
Defines specific 802.11n (2.4 GHz) radio parameters.
Syntax:
set placement
ch-mode
channel
power
rf-mode
rates
beacon
dtim
aggr
shortgi
single-antenna
preamble
rts
range
qos
qbss-beacon
qbss-mode
Example:
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
For information on configuring the Radio 1 Configuration options available to the access point using the applet (GUI), see
Configuring the 802.11a/n or 802.11b/g/n Radio on page
Defines the access point radio placement as indoors or outdoors.
Determines how the radio channel is selected (user, auto-20 or auto-40).
Defines the radio channel used. Channel allowed depends on actual country of operation.
Defines the antenna power transmit level. Depends on radio type, channel and country.
Sets the default rates for the 802.11 mode selected (b-only, g-only, n-only, b-and-g, or
bg-and-n).
Sets the supported radio transmit rates.
Sets the beacon interval used by the radio.
Defines the DTIM interval (by index) used by the radio.
Sets the radio's aggregation.
Enables/disables a short guard interval of 40MHz.
Enables/disables single antenna support. Enable (default setting) to decrease sensitivity and device retries.
Enables/disables short preamble support for the radio (this is 2.4 GHz radio specific).
Defines the RTS Threshold value for the radio.
Sets the radio's extended range (in miles 0-50).
Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for the radio.
Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
Enables/disables the QBSS load element.
GHz])>set placement indoor
GHz])>set ch-mode user
GHz])>set channel 11
GHz])>set power 4
GHz])>set rf-mode b-only
GHz])>set rates
GHz])>set beacon 100
GHz])>set dtim 1 40
GHz])>set aggr ampdu enable
GHz])>set shortgi disable
GHz])>set single-antenna disable
GHz])>set preamble disable
GHz])>set rts 2341
GHz])>set qos cwmin 125
GHz])>set qos cwmax 255
GHz])>set qos aifsn 7
GHz])>set qos txops 0
GHz])>set qbss-beacon 110
GHz])>set qbss-mode enable
5-57.