Motorola AP-7131 Product Reference Manual page 149

This interface is a
BOOTP Client
This interface uses
static IP Address
This interface is a
DHCP Server
Address Assignment
Range
Advanced DHCP
Server
IP Address
Network Mask
Default Gateway
Domain Name
Primary DNS Server
Select this button to enable BOOTP to set access point network
address information via this LAN1 or LAN2 connection.
When selected, only BOOTP responses are accepted by the access
point. If both DHCP and BOOTP services are required, do not select
BOOTP Client.
Select the This interface uses static IP Address
manually enter static network address information in the areas
provided.
The access point can be configured to function as a DHCP server
over the LAN1 or LAN2 connection. Select the
DHCP Server button and manually enter static network address
information in the areas provided.
Use the address assignment parameter to specify a range of
numerical (non DNS name) IP addresses reserved for mapping
client MAC addresses to IP addresses. If a manually (static)
mapped IP address is within the IP address range specified, that IP
address could still be assigned to another client. To avoid this,
ensure all statically mapped IP addresses are outside of the IP
address range assigned to the DHCP server.
Click the Advanced DHCP Server
for generating a list of static MAC to IP address mappings for
reserved clients. A separate screen exists for each of the LANs. For
more information, see Configuring Advanced DHCP Server Settings
on page 5-12.
The network-assigned numerical (non DNS name) IP address of the
access point.
The first two sets of numbers specify the network domain, the next
set specifies the subset of hosts within a larger network. These
values help divide a network into subnetworks and simplify routing
and data transmission. The subnet mask defines the size of the
subnet.
The Default Gateway parameter defines the numerical (non DNS
name) IP address of a router the access point uses on the Ethernet
as its default gateway.
Enter the name assigned to the primary DNS server.
Enter the Primary DNS numerical (non DNS name) IP address.
Network Management
button, and
This interface is a
button to display a screen used
5-11