Motorola AP-7131 Product Reference Manual page 683

B.1.2.1 BootP Options
This section contains instructions for the automatic update of the access point firmware and
configuration file using a BootP Server.
The setup example described in this section includes:
• 1 AP-7131 model access point
• 1 Linux/Unix BOOTP Server
• 1 TFTP Server.
To configure BootP options using a Linux/Unix BootP Server:
1. Set the Linux/Unix BootP Server and access point on the same Ethernet segment.
2. Configure the bootptab file (/etc/bootptab) on the Linux/Unix BootP Server in any one of the
formats that follows:
Using options 186, 187 and 188:
A P -7 1 3 1 :h a = 0 0 a 0 f8 8 a a 6 d 8 \
Using options 66, 67 and 129:
A P -7 1 3 1 :h a = 0 0 a 0 f8 8 a a 6 d 8 \
:sm = 2 5 5 .2 5 5 .2 5 5 .0 \
:ip = 1 5 7 .2 3 5 .9 3 .1 2 8 \
:g w = 1 5 7 .2 3 5 .9 3 .2 \
:T 1 8 6 = "1 5 7 .2 3 5 .9 3 .2 5 0 "\
:T 1 8 7 = "a p fw .b in "\
:T 1 8 8 = "cfg .txt":
:sm = 2 5 5 .2 5 5 .2 5 5 .0 \
:ip = 1 5 7 .2 3 5 .9 3 .1 2 8 \
:g w = 1 5 7 .2 3 5 .9 3 .2 \
:T 6 6 = "1 5 7 .2 3 5 .9 3 .2 5 0 "\
:T 6 7 = "a p fw .b in "\
:T 1 2 9 = "cfg .txt":
< LA N M A C A d d re ss>
< S u b n e t M a sk>
< IP A d d re ss>
< g a te w a y>
< T FT P S e rve r IP >
< Firm w a re file >
< C o n fig u ra tio n file >
< LA N M A C A d d re ss>
< S u b n e t M a sk>
< IP A d d re ss >
< g a te w a y>
< T FT P S e rve r IP >
< Firm w a re file >
< C o n fig u ra tio n file >
B-7
Usage Scenarios