Motorola AP-7131 Product Reference Manual page 148

Hide thumbs Also See for AP-7131:

Table of Contents

AP-7131 Access Point Product Reference Guide

2. Configure the

NOTE Motorola recommends the WAN and LAN ports should not both be

This interface is a

DHCP Configuration

configured as DHCP clients.

Select this button to enable DHCP to set network address

information via this LAN1 or LAN2 connection. This is

recommended if the access point resides within a large corporate

network or the Internet Service Provider (ISP) uses DHCP. This

setting is enabled for LAN1 by default.

DHCP is a protocol that includes mechanisms for IP address

allocation and delivery of host-specific configuration parameters

from a DHCP server to a host. If DHCP Client is selected, the first

DHCP or BOOTP server to respond sets the IP address and network

address values since DHCP and BOOTP are interoperable.

field to define the DHCP settings used for the LAN.