Motorola AP-7131 Product Reference Manual page 339

AP7131>admin>passwd
Description:
Changes the password for the admin login.
Syntax:
passwd Changes the admin password for access point access. This requires typing the old admin password and entering a
new password and confirming it. Passwords can be up to 11 characters. The access point CLI treats the following as
invalid characters:
' " \
In order to avoid problems when using the access point CLI, these characters should be avoided.
Example:
admin>passwd
Old Admin Password:******
New Admin Password (0 - 11 characters):******
Verify Admin Password (0 - 11 characters):******
Country Code: us
Warning: The country selected must match the country the device is used in. An
incorrect country may result in illegal radio operation. Your radio's
configuration have been defaulted to operate within the regulations of the country
selected.
For information on configuring passwords using the applet (GUI), see
& $ ^ * + ? [ ( { | , < >
Setting Passwords on page 6-3.
8-5