Motorola AP-7131 Product Reference Manual page 141

Enable
LAN Name
Ethernet Port
Enable 802.1q
Trunking
VLAN Name
WLAN Mapping
3. Refer to the LAN Ethernet Timeout
processed by the access point.
Use the Ethernet Port Timeout
inactivity for the LAN assigned to the Ethernet port. When
point uses the value defined in the
allows the LAN to use the Ethernet port for an indefinite timeout period. Select the
Hardware Detect
does not detect a physical connection, the radio is unavailable to the access point.
4. Refer to the 802.1x Port Authentication
point's LAN port.
Select the LAN1 and/or LAN2 checkbox to allow the forwarding of
data traffic over the specified LAN connection. The LAN1
connection is enabled by default, but both LAN interfaces can be
enabled simultaneously. The LAN2 setting is disabled by default.
Use the LAN Name field to modify the existing LAN name. LAN1
and LAN2 are the default names assigned to the LANs until
modified by the user.
The Ethernet Port radio buttons allow you to select one of the two
available LANs as the LAN actively transmitting over the access
point's LAN port. Both LANs can be active at any given time, but
only one can transmit over the access point's physical LAN
connection, thus the selected LAN has priority.
Select the Enable 802.1q Trunking
to conduct VLAN tagging. If selected, click the
button to configure mappings between individual WLANs and
LANs. If enabled, the access point is required to be connected to a
trunked port.
Click the VLAN Name
to create VLANs and assign them VLAN IDs. For more information,
see Configuring VLAN Support on page
Click the WLAN Mapping
Configuration screen to map existing WLANs to one of the two
LANs and define the WLAN's VLAN membership (up to 16
mappings are possible per access point). For more information, see
Configuring VLAN Support on page
field to define how LAN Ethernet inactivity is
drop-down menu to define how the access point interprets
Sec. box (default is 30 seconds). Selecting
option to use the pyhsical LAN port to detect activity. If the LAN port
checkbox to enable the LAN
button to launch the VLAN Name
5-5.
button to launch the
5-5.
Enabled
field if using port authentication over the access
Network Management
WLAN Mapping
screen
VLAN
is selected, the access
Disabled
5-3