Motorola AP-7131 Product Reference Manual page 466

8-132 AP-7131 Access Point Product Reference Guide
AP7131>admin(network.wireless.rogue-ap)> set
Description:
Defines the access point ACL rogue AP method.
Syntax:
set mu-scan
interval
on-channel
detector-scan
ABG-scan
motorola-ap
applst-ageout
roglst-ageout
Example:
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)>set mu-scan enable
admin(network.wireless.rogue-ap)>set interval 10
admin(network.wireless.rogue-ap)>set on-channel disable
admin(network.wireless.rogue-ap)>set detector-scan disable
admin(network.wireless.rogue-ap)>set ABG-scan disable
admin(network.wireless.rogue-ap)>set motorola-ap enable
admin(network.wireless.rogue-ap)>set applst-ageout 10
admin(network.wireless.rogue-ap)>set roglst-ageout 10
admin(network.wireless.rogue-ap)>show
MU Scan
MU Scan Interval
On Channel
Detector Radio Scan
Auto Authorize Motorola APs
Approved AP age out
Rogue AP age out
For information on configuring the Rogue AP options available to the access point using the applet (GUI), see
Configuring Rogue AP Detection on page
<mode> Enables or disables to permit MUs to scan for rogue APs.
<minutes> Define an interval for associated MUs to beacon in attempting to locate rogue APs.
Value not available unless mu-scan is enabled.
<mode> Enables or disables on-channel detection.
<mode> Enables or disables AP detector scan (dual-radio model only).
<mode> Enables or disables A/BG Detector Scan Mode.
<mode> Enables or disables the Authorize Any AP with a Motorola MAC address option.
<minutes> Sets the approved AP age out time.
<minutes> Sets the rogue AP age out time.
6-54.
: enable
: 10 minutes
: disable
: disable
: enable
: 10 minutes
: 10 minutes