Motorola AP-7131 Product Reference Manual page 161

2. Configure the Address Mappings
and set outbound/inbound NAT mappings.
WAN IP Address
NAT Type
field to generate a WAN IP address, define the NAT type
The WAN IP addresses on the NAT screen are dynamically
generated from address settings applied on the
Specify the NAT Type as
host (local) IP address. 1 to 1 mapping is useful when users need
dedicated addresses, and for public-facing servers connected to
the access point.
Set the NAT Type as 1 to Many
multiple local IP addresses. This displays the
the adjacent Outbound Mappings field. This button displays a
screen for mapping the LAN IP addresses that are associated with
each subnet.
Define the NAT Type as none
on the internal network.
WAN
1 to 1 to map a WAN IP address to a single
to map a WAN IP address to
mappings
when routable IP addresses are used
Network Management 5-23
screen.
button in