Displaying Rogue Ap Details - Motorola AP-51 series Product Reference Manual

6-60 AP-51xx Access Point Product Reference Guide
3. Enter a value (in minutes) in the Rogue APs
elapsed minutes before an AP will be removed from the rogue AP list and reevaluated. A
zero (0) for this value (default value) indicates an AP can remain on the rogue AP list
permanently.
4. Highlight an AP from within the Rogue APs table and click the
button to move the device into the list of Allowed APs.
5. Click the
the Rogue APs table to the list of allowed APs.
6. Highlight a rogue AP and click the
detection information specific to that rogue device. This information is helpful in
determining if a rogue AP should be moved to the Allowed APs table.
For more information on the displaying information on detected rogue APs, see
Rogue AP Details on page
7. To remove the Rogue AP entries displayed within the e Rogue APs field, click the
Rogue AP List
Motorola only recommends clearing the list of Rogue APs when the devices displaying
within the list do not represent a threat to the access point managed network.
8. Click Apply
without clicking Apply results in all changes to the screen being lost.
9. Click Undo Changes
settings displayed on the Active APs screen to the last saved configuration.
10. Click Logout
logout before the applet is closed.

6.13.1.1 Displaying Rogue AP Details

Before moving a rogue AP into the list of allowed APs within the Active APs screen, the device
address and rogue detection information for that AP should be evaluated.
To evaluate the properties of a rogue AP:
1. Select Network Configuration
the access point menu tree.
2. Highlight a target rogue AP from within Rogue APs table and click the
The
Detail
Add All to Allowed APs List
6-60.
button.
to save any changes to the Active APs screen. Navigating away from the screen
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
screen displays for the rogue AP.
Age Out Time
button to move each of the APs displayed within
Details button to display a screen with device and
-> Wireless -> Rogue AP Detection
field to indicate the number of
Add to Allowed APs List
Displaying
-> Active APs
button.
Details
Clear
from