Appendix A - Product Options; Hardware Options; G.703/Idr Esc Interface; Turbo Card - Radyne DMD20 Installation And Operation Manual

DMD20 Universal Satellite Modem
A.0 Hardware Options
The following enhanced interface cards are available.
A.0.1 G.703/IDR ESC Interface
The DMD20 can be equipped with a G.703/IDR ESC Interface.
A.0.2 Turbo Card
The DMD20 can be equipped with an optional Turbo Codec Outer Code. This option must be
installed at the factory and may require other options.
A.0.3 Internal High Stability
The DMD20 can be equipped with a 1x10
enhancement.
A.0.4 DC Prime Power
Provides an optional DC Power Source.
A.0.5 ASI/RS-422 Parallel
ASI, Serial, BNC (female)
DVB/M2P, Parallel, RS-422, DB-25 (female)
A.0.6 ASI/LVDS Parallel
ASI, Serial, BNC (female)
DVB/M2P, Parallel, LVDS, DB-25 (female)
A.0.7 HSSI
High-Speed Serial Interface 50-Pin SCSI-2 Type Connector. Complies with Cisco Systems in
HSSI Design Specification, Revision 3.0.
A.1 Customized Options
The DMD20 may be customized for specific customer requirements. Most modifications or
customization can be accomplished by means of firmware/software modifications.
The following are examples of the types of customization available to the user:
Customized Data Rates.
Customized Scrambler/Descramblers.
Customized Overhead Framing Structures.
Customized Modulation Formats.
Customized Uses for the ES-ES Overhead Channel.
Contact the Radyne ComStream Corporation Customer Service or Sales Department at
(602) 437-9620 for all requests.
TM103 – Rev. 1.1
Appendix A – Product Options
-7
or better Stability Frequency Reference as an add-on
Appendix A
A-1