Radyne DMD20 Installation And Operation Manual page 169

Appendix B
Opcode: <2409h>
<1> Alarm1
<1> Alarm2
<1> Alarm3
<1> Alarm4
<1> Insert Status Fault
<1> Common Alarm1
<1> Common Alarm2
Opcode: <2A00h>
<1> Network Spec.
<4> Frequency
<2> Sweep Delay
<4> Data Rate
<1> Sweep Boundry
<1> Input Level Limit
<2> Strap Code
<1> Filter Mask
<1> Demodulation Type
B-30
Query a demodulator's Current Alarms
Query Response
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Command a demodulator's configuration
0 = Closed Net. 1 = IDR, 2 = IBS, 3 = D&I
Selects the IF Frequency in Hz. The range is 50 MHz to 180
MHz for the 70/140 MHz type modems and 950 MHz to 1750
MHz for the L-Band modems
Binary value, 0.1 second steps
Binary value, 1 bps steps
Sweep limits. Max of ± 32 kHz, from 1 to 32 kHz in 1 kHz
steps
Lower level limit, binary value, 1dB steps, reserved
Binary value
0 = INTELSAT, 1 = EUTELSAT, 2 = CLOSED NET1
0 = QPSK, 1 = BPSK, 2 = 8PSK, 3 = 16QAM, 4 = OQPSK
DMD20 Universal Satellite Modem
TM105 – Rev. 1.1