DMD50 Universal Satellite Modem
Product Options
A.0 Hardware Options
The following enhanced interface cards are available.
A.0.1 G.703/IDR ESC Interface
The modem can be equipped with either a G.703 T1/E1/T2/E2 /IDR ESC Interface or G.703
T1/E1/T2/E2/T3/E3/STS1IDR ESC.
A.0.2 Internal High Stability
The modem can be equipped with a 5x10
enhancement. This is a factory upgrade only.
A.0.3 DC Input Prime Power
Allows for an optional DC Input Power Source (standard unit only).
A.0.4 ASI/RS-422 Parallel
ASI, Serial, BNC (Female)
DVB/M2P, Parallel, RS-422, DB-25 (Female)
A.0.5 ASI/LVDS Parallel
ASI, Serial, BNC (Female)
DVB/M2P, Parallel, LVDS, DB-25 (Female)
A.0.6 HSSI
High-Speed Serial Interface 50-Pin SCSI-2 Type Connector. Complies with Cisco Systems in
HSSI Design Specification, Revision 3.0.
A.0.7 Ethernet Data Interface
Four RJ-45, Auto-Crossover, Auto-Sensing, 10/100 Ethernet Data Ports. Complies with
IEEE 802.3 and IEEE 802.3u.
A.0.8 HSSI / G.703
High-Speed Serial Interface 50-Pin SCSI-2 Type Connector. Complies with Cisco Systems in
HSSI Design Specification, Revision 3.0. The G.703 interface supports T1, E1, T2, E2 rates
balanced or unbalanced. It does not support backward alarms.
TM118 – Rev. 1.1
-8
or better Stability Frequency Reference as an add-on
Appendix A
A
A-1