Radyne DMD20 Installation And Operation Manual page 72

User Interfaces
TRAP VERSION
AUTHORIZATION
RD COMMUNITY
RDWR COMMUNITY
4-24
When V3 is used, three contexts are supported: public,
mib2, and dev. Context, Authentication and Privacy are
a portion of each SNMPV3 message.
The public context will only allow the user to see the
sysoid of the unit. This is the most restricted access
possible and only allows the unit to be identified by a
host SNMP Station.
The mib2 context allows a user with appropriate
authentication to access the mib2 OIDs and the SNMP
OIDs. These are of interest primarily to network
operators not controlling the satellite link.
The dev context allows a user with appropriate
authentication to access the device control portion of the
MIB. These OIDs are used to control the devices
satellite link and operation.
{V1, V2}
This controls the type of message format used when a
message trap is generated by the equipment and bound
for a SNMP Host. Messages will only be sent if the unit
has been authorized to do so.
{TRAPS OFF, TRAPS ON}
This controls the type of message format used when a
message trap is generated by the equipment and bound
for a SNMP host. Messages will only be sent if the unit
has been authorized to do so.
{16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is requested by a V1/V2 SNMP
message.
{16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is being changed by a V1/V2
SNMP message.
DMD20 Universal Satellite Modem
TM103 - Rev. 1.1