DMD20 Universal Satellite Modem
DATA (menu)
DATA RATE (bps)
SYMB RATE
INNER FEC
DIFF CODING
SCRAMBLER SEL
SCRAMBLER CTRL
SAT FRAMING
DATA POLARITY
SYMBOL PAIR
ESC OVERHEAD
TM103 – Rev. 1.1
{Refer to Technical Specs for Data Rates}
Allows the user to set the Data Rate in bps steps via the
Front Panel Arrows or Keypad.
Allows the user to view the Symbol Rate.
{1/2 Rate VIT, 3/4 Rate VIT, 7/8 Rate VIT, NONE
Optional encoders
1/2 Rate SEQ, 3/4 Rate SEQ , 7/8 Rate SEQ , 2/3 Rate
TRE (8PSK), 3/4 Rate Turbo (.793), 1/2 Rate Turbo
(.495), 1/3 Rate Turbo (.325), 3/4 Rate CSC}
Allows the user to select the Tx Code Rate and Type.
{ENABLED, DISABLED}
Allows the user to enable or disable the Differential
Decoder. Having the decoder enabled ensures proper
phase lock.
{NONE, V.35-IESS, V.35 CITT, V.35 EF, IBS
w/Optional Framing and optional Reed-Solomon,
Reed-Solomon Scrambler w/Optional Framing,
CCITT, V.35FC, OM-73, V.35EF_RS, TPC
SCRAMBLER (Turbo Codec)}
Allows the user to select the descrambler type.
{ON, OFF}
Allows the user to enable or disable the descrambler
operation.
{1/15 (IBS), 1/15 (Async), 96 Kbps (IDR), None}
Used with IDR, IBS, or Asynchronous Interface Only.
Allows the user to select the Framing Type.
{INV. TERR&BASE, INV. BASEBAND, INV.TERR
DATA, NONE}
Allows the user to invert the Rx Data polarity.
{NONE, SWAPPED}
Allows the user to swap the I&Q Channels.
(BPSK Mode Only)
{VOICE X2, DATA 64KBPS}
TBD
User Interfaces
4-9