Radyne DMD20 Installation And Operation Manual page 176

DMD20 Universal Satellite Modem
Opcode: <2A1Fh>
<1> Rx Interface Type
Opcode: <2A20h>
Opcode: <2A21h>
<1> Data Invert
Opcode: <2A22h>
<1> Summary Alarm
Opcode: <2A23h>
Opcode: <2A24h>
Opcode: <2A25h>
Opcode: <2A26h>
Opcode: <2A33h>
<1> Pattern Length
B.0.5.3 Modem Queries & Commands
Opcode: <2403h>
<1> Modem ID
Opcode: <2404h>
<1> Modem control mode
TM105 – Rev. 1.1
Command a demodulator's interface type
0 = G703-B-T1_AMI
1 = G703-B-T1_B8ZS
2 = G703-B-E1
3 = G703-B-T2
4 = G703-U-E1
5 = G703-U-T2
6 = G703-U-E2
7 = RS-422
8 = V.35
9 = RS-232
Command center buffer (No Parameters)
Command a demodulator's Data Invert
0 = None, 1 = Terrestrial, 2 = Baseband, 3 = Terrestrial and
Baseband
Command Force Demod Summary Alarms
0 = Do not force. 1 = Force
Command External EXC Source
0 = BNC EXC. 1 = BAL EXC, 2 = IDI, 3 = Sys [RCS10 Only]
Clear Demodulator Latched Alarm 1 (No Data)
Clear Demodulator Latched Alarm 2 (No Data)
Clear Demodulator Latched Alarm 3 (No Data)
Command a demodulator's time mark transfer
Query Response
Unsigned binary (4 to 16) inclusively
Query a modem's identification
Query Response
DMD20 Modulator = 20, DMD20 Demodulator = 21, DMD20
Modem = 22
Query a modem's control mode
Query Response
0 = Front panel. 1 = Terminal, 2 = Computer
Appendix B
B-37