Radyne DMD20 Installation And Operation Manual page 160

DMD20 Universal Satellite Modem
Opcode: <2634h>
<1> AUPC Local Enable
<1> AUPC Local CL
Action
<1> AUPC Tracking Rate
<1> AUPC Remote CL
Action
<2> AUPC Eb/No
<2> AUPC Min Power
<2> AUPC Max. Power
<2> AUPC Nominal
Power
Opcode: <2635h>
<1> AUPC Remote
Enable
<1> AUPC Remote
Baseband Loopback
<1> AUPC Remote 2047
Opcode: <2638h>
<1> Time Mark
<1> Pattern Length
TM105 – Rev. 1.1
Command AUPC Local Configuration
0 = Off, 1 = On
0 = Hold, 1 = Nominal, 2 = Maximum
0 = 0.5 dB/min.
1 = 1.0 dB/min.
2 = 1.5 dB/min.
3 = 2.0 dB/min.
4 = 2.5 dB/min.
5 = 3.0 dB/min.
6 = 3.5 dB/min.
7 = 4.0 dB/min.
8 = 4.5 dB/min.
9 = 5.0 dB/min.
10 = 5.5 dB/min.
11 = 6.0 dB/min.
0 = Hold, 1 = Nominal, 2 = Maximum
Binary value, Target Eb/No at the receiver
Signed value of +50 to –200 with implied decimal point; 49 = +
4.9 dBm
Signed value of +50 to –200 with implied decimal point; 49 = +
4.9 dBm
Signed value of +50 to –200 with implied decimal point; 49 = +
4.9 dBm
Command AUPC Remote Configuration
0 = Off, 1 = On
0 = Disable, 1 = Enable
0 = Disable, 1 = Enable
Command a modulator's Time Mark Transfer
0 = Disable, 1 = Enable
Unsigned Binary (4 to 16) inclusively
Appendix B
B-21