Appendix A - Product Options; Hardware Options; G.703/Idr Esc Interface; Turbo Card - Radyne DMD20 Installation And Operation Manual

DMD20/DMD20 LBST Universal Satellite Modem Appendix A
Product Options
A
A.0 Hardware Options
The following enhanced interface cards are available.
A.0.1 G.703/IDR ESC Interface
The DMD20 can be equipped with a G.703/IDR ESC Interface.
A.0.2 Turbo Card
The DMD20 can be equipped with an optional Turbo Codec Outer Code. This option must be
installed at the factory and may require other options.
A.0.3 Internal High Stability
-8
The DMD20 can be equipped with a 5x10 or better Stability Frequency Reference as an add-on
enhancement. This is a factory upgrade only.
A.0.4 DC Input Prime Power
Allows for an optional DC Input Power Source (standard unit only).
A.0.5 ASI/RS-422 Parallel
ASI, Serial, BNC (Female)
DVB/M2P, Parallel, RS-422, DB-25 (Female)
A.0.6 ASI/LVDS Parallel
ASI, Serial, BNC (Female)
DVB/M2P, Parallel, LVDS, DB-25 (Female)
A.0.7 HSSI
High-Speed Serial Interface 50-Pin SCSI-2 Type Connector. Complies with Cisco Systems in
HSSI Design Specification, Revision 3.0.
A.0.8 Ethernet Data Interface
Four RJ-45, Auto-Crossover, Auto-Sensing, 10/100 Ethernet Data Ports. Complies with
IEEE 802.3 and IEEE 802.3u.
A.0.9 Sequential Interface
The DMD20 is equipped with a Sequential option.
TM103 – Rev. 2.5 A-1