Radyne DMD20 Installation And Operation Manual page 149

Appendix B
<1> Alarm 3
<2> AUPC Remote Test
2047
<1> AUPC Remote Test
2047 BER Exponent
<1> Reserved
<4> Symbol Rate
Opcode: <240Bh>
<1> Control Mode
<1> Revision Number
<1> Alarm1
<1> Alarm2
<1> Common Alarm1
<1> Common Alarm2
<1> Latched Alarm1
<1> Latched Common
Alarm1
<1> Latched Common
Alarm2
<1> Drop Status
<1> OnlineFlag
<1> +5V Voltage
B-10
Bit 0 = Backward Alarm 1 Transmitted
Bit 1 = Backward Alarm 2 Transmitted
Bit 2 = Backward Alarm 3 Transmitted
Bit 3 = Backward Alarm 4 Transmitted
Bits 4 - 7 = Spare
0 = No, 1 = Yes
Binary value with implied decimal point; 795 = 7.95)
Binary value with implied sign; 6 = -6
Ignore
Binary value, 1sps steps
Query a Modulator's Status
Query Response
0 = Front Panel. 1 = Terminal, 2 = Computer
Decimal point implied
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Bit 0 = Frame lock fault. 1 = Fail
Bit 1 = Multiframe lock Fault. Valid in E1 PCM -30 and PCM-
30C. 1 = Fail
Bit 2 = CRC lock fault. Valid in T1ESF, and E1 CRC enabled.
1 = Fail
Bit 3 = T1 yellow alarm received. 1 = Received
Bit 4 = E1 FAS alarm received. 1 = Received
Bit 5 = E1 MFAS alarm received. Not valid in FAS mode. 1 =
Received
Bit 6 = E1 CRC alarm received. 1 = Received
Bit 7 = CRC calculation error. 1 = Fail
0 = Offline, 1 = Online
+5V. Implied decimal point. ex: 49 = +4.9 V
DMD20 Universal Satellite Modem
TM105 – Rev. 1.1