Radyne DMD20 Installation And Operation Manual page 159

Appendix B
Opcode: <262Ch>
<1> AUPC Remote CL
Action
Opcode: <262Dh>
<1> AUPC Tracking Rate
Opcode: <262Eh>
<1> AUPC Remote
Baseband Loopback
Opcode: <262Fh>
<1> AUPC Remote 2047
Opcode: <2630h>
<2> AUPC Eb/No
Opcode: <2631h>
<2> AUPC Min. Power
Opcode: <2632h>
<2> AUPC Max. Power
Opcode: <2633h>
<2> AUPC Nominal
Power
B-20
Command AUPC Remote CL Action
0 = Hold, 1 = Nominal, 2 = Maximum
Command AUPC Tracking Rate
0 = 0.5 dB/min.
1 = 1.0 dB/min.
2 = 1.5 dB/min.
3 = 2.0 dB/min.
4 = 2.5 dB/min.
5 = 3.0 dB/min.
6 = 3.5 dB/min.
7 = 4.0 dB/min.
8 = 4.5 dB/min.
9 = 5.0 dB/min.
10 = 5.5 dB/min.
11 = 6.0 dB/min.
Command AUPC Remote Baseband Loopback
0 = Disable, 1 = Enable
Command AUPC Remote Test 2047
0 = Disable, 1 = Enable
Command AUPC Eb/No
Target Eb/No at the receiver
Command AUPC Minimum Power
Signed value of +50 to –200 with implied decimal point; 49 = +
4.9 dBm
Command AUPC Maximum Power
Signed value of +50 to –200 with implied decimal point; 49 = +
4.9 dBm
Command AUPC Nominal Power
Signed value of +50 to –200 with implied decimal point; 49 = +
4.9 dBm
DMD20 Universal Satellite Modem
TM105 – Rev. 1.1