Radyne DMD20 Installation And Operation Manual page 155

Appendix B
<2> AUPC Target Eb/No
<2> AUPC Minimum
Power
<2> AUPC Maximum
Power
<2> AUPC Nominal
Power
Opcode: <2602h>
<4> Frequency
Opcode: <2603h>
<2> Strap code
Opcode: <2604h>
<4> Data rate
Opcode: <2605h>
<1> Filter Mask
Opcode: <2606h>
<1> Modulation Type
B-16
Target Eb/No at Receiver
Singed value +50 to –200 with implied decimal point; 49 =
+4.9 dBm
Singed value +50 to –200 with implied decimal point; 49 =
+4.9 dBm
Singed value +50 to –200 with implied decimal point; 49 =
+4.9 dBm
Command a modulator's frequency
Binary value, 1 Hz steps. Selects the IF Frequency in Hz. The
range is 50 MHz to 180 MHz for the 70/140 MHz type modems
and 950 MHz to 1750 MHz for the L-Band modems.
Note: This command also turns the carrier off to protect
the satellite.
Command a modulator's strap code
Binary value
Note: This command also turns the carrier off to protect
the satellite.
Command a modulator's data rate
Binary value, 1 bps steps
Note: This command also turns the carrier off to protect
the satellite.
Command a modulator's filter mask
0 = INTELSAT, 1 = EUTELSAT, 2 = CLOSED NET1
Command a modulator's modulation type
0 = QPSK, 1 = BPSK, 2 = 8PSK, 3 = 16QAM, 4 = OQPSK
DMD20 Universal Satellite Modem
TM105 – Rev. 1.1