Hard Top With Storage Box And Outriggers (Optional); Seating; Galvanic Isolator - Pro-Line Boats 32 Express 2010 Owner's Manual

you are fishing or underway. Modifications to the frame or the improper installation of after
market components of a sizeable weight will void the warranty.

Hard Top with Storage Box and Outriggers (Optional)

When factory installed, this options includes the same frame and storage box as above. However, with the
installation of the outriggers, we have included mounting pads for additional support.
When this option is selected and factory installed, the outrigger installation includes a pair of outrigger bases,
poles and lines. The bases are constructed of anodized aluminum and are installed on the port and starboard
sides of the optional T-top. Turn the handle at the bottom of the outrigger base to rotate the outriggers 90
degrees (from the side to the aft end of the boat).

Seating

The following seating comes standard on the 32 Express:
Command seat

Galvanic Isolator

The galvanic isolator is located behind the starboard panel in
the mid berth cabin and above the carbon monoxide detector.
Stray, low voltage current flowing between the AC safety
ground and DC bonding system is a principal cause of
"galvanic" action. This type of stray current will normally
overload your zinc anodes as they try to protect your boat from
other near by boats and/or metal objects of the marina.
Sacrificial zincs corrode away as they protect metal thru hulls,
shafts and props from damaging galvanic corrosion and
electrolysis.
Installing the galvanic isolator between the AC safety ground and DC bonding system interrupts the galvanic
circuit with other boats and the dock when your boat is plugged into a shore power system. It also maintains an
AC safety ground and solves the most common cause of corrosion. Corrosive action on your zincs is significantly
Rear facing aft cockpit seat
Tub below the seat drains into
the bilge and does not drain
overboard.
Lounge seat with bolster
Fold away transom seat
48